Date: prev next · Thread: first prev next last


Hi :)
Most versions of Linux have a "Live Cd" option.  When it really gets down to it all the different 
versions of Linux are pretty much the same "under the bonnet".  Ubuntu 12.04 sounds like the best 
one to try first at the moment.  

The tricky bit is that your machine's Bios might not be set-up to allow booting from Cd.  I suspect 
that you can edit the Bios yourself.  Most users can't but then most people have trouble installing 
software at all.  The added complication is that the Bios probably doesn't have a screen-reader so 
you might need to get someone else to follow your instructions to do it.  Let us know if it would 
be good to have some screen-shots of typically bioses or google it.  

Hopefully you wont need to worry about all that and the Cd will just boot happily.
Regards from
Tom :)  


--- On Sun, 2/9/12, Tom Randall <kf6ddt@comcast.net> wrote:

From: Tom Randall <kf6ddt@comcast.net>
Subject: Re: [libreoffice-accessibility] Ubuntu LiveCd & Wubi - was Java Nightmare
To: "Alex Midence" <alex.midence@gmail.com>
Cc: accessibility@global.libreoffice.org
Date: Sunday, 2 September, 2012, 2:37

Hi Tom and Alex and all.
This is good information and I am definitely going to look into it sometime
in the near future.  I had looked at ubuntu a while back as well as Vinux.
I frankly don't care much which one I run again so long as it works.  I will
probably try the Ubuntu live cd solution first and then if that seems to
work halfway decent on this machine and if I don't have to jump through a
bunch of hoops to get speech up and running I will probably go ahead and
install it.  As I said before I've toyed with Linux in the past even way
back in the day when you had to run it through a terminal and it's something
I've kind of wanted to get back into.  I don't have a huge hd in this thing
at the moment, I believe it's a 300GB but I can pick up a bigger one pretty
cheap at some point.  Even if I don't do that right away I could probably
make Windows lose 50GB or so to install ubuntu and not miss it too much.
I'd have to resize my Windows partition but I think I have the software to
do that someplace around here.
Fortunately I have found a reasonable solution that gives me some breathing
space while I figure this out.  As I said in another message I do have a
MacBook as well as a pc so I can teach people how to use VoiceOver.  I have
LO installed on this and while there are some pretty serious access issues
particularly in the preferences section that make it pretty impossible to
change things, accessibility in writer and calc themselves are good enough
that I am able to do what I need to for now.  I will go on the ubuntu site
maybe this evening or tomorrow and check it out.
Laters.
Tom

-----Original Message----- From: Tom Davies
Sent: Thursday, August 30, 2012 7:12 AM
To: Alex Midence ; Tom Randall
Cc: accessibility@global.libreoffice.org
Subject: [libreoffice-accessibility] Ubuntu LiveCd & Wubi - was Java Nightmare

Hi :)
Ahhh, a LiveCd session of Ubuntu 12.04 sounds like a fast way to a quick result.

I guess a fresh install of 12.04 on a new partition would have things set up right too?  About 
10-20Gb is a comfortable amount of space for Ubuntu if you can't share /home or Swap.  The fresh 
install sorts out a boot-menu so that you can choose to use a pre-existing OS that you already have 
on your system but by default it puts the new install of 12.04 at the top of that menu.  To change 
that login to 12.04 and get to a command-line and paste in these lines;

cd /etc/grub.d
sudo mv 30_os-prober 08_os-prober
sudo update-grub

If it makes a difference which side the minimise, full-screen and close buttons are on the 
title-bar at the top of windows then you can change them from left (like a Mac) to right (like 
Windows) by copy&pasting this line

gconftool-2 --set "/apps/metacity/general/button_layout" --type string 
"menu:minimize,maximize,close"

Note that should be all on one line but it's wrapped-around on my monitor at my resolution.



I concurr about using MS Office if that is what it takes to get a good result quickly.  Obviously i 
would prefer people use OpenOffice but if using MS Office is what it takes to get the job done then 
do so.  Sometimes migrating to OpenSource takes a while and until you've managed it you still need 
to be able to get your main work done.

As for Virtual Machines i think having Windows as the host and a Gnu&Linux inside it is the 'wrong' 
way around.  One of the crucial advantages of Gnu&Linux is lost because you would be using the 
flaky Ntfs file-system rather than the solidly reliable Ext3.  I suspect that the ideal way around 
would mean Orca wouldn't work (unless you ran a VM inside Windows inside the main VM!) so again the 
'wrong' way suddenly becomes the right thing to do.

Ubuntu offers a better way than a Virtual Machine.  you can install Ubuntu directly inside Windows 
using Ubuntu's "Wubi" installer.  Just put the Ubuntu Cd in after booting into Windows and the 
option should pop-up.  Few other distros offer this type of option so you would have to use a VM 
for them.  With Ubuntu (or Puppy) you just get the extra possibility.

Is there an alternative to Orca?  What do other people use with LO?
Regards from
Tom :)






________________________________
From: Alex Midence <alex.midence@gmail.com>
To: Tom Randall <kf6ddt@comcast.net>
Cc: accessibility@global.libreoffice.org
Sent: Thursday, 30 August 2012, 14:21
Subject: Re: [libreoffice-accessibility] Java nightmare & FAQ wiki-page

Yes, I remember all that with Linux.  However, much progress has been
made in the last two years to get thing sworking out of the box.
Seriously, if you are pressed for time, the single fastest and best
way to go is to download an iso of Ubuntu Precise which has
acessibility out of the box, pop it into your cd rom drive, power up
your machine and hit control s when you hear the drumroll.  When Orca
starts talking, alt tab to the installation dialog and select the try
it out option so you can run it as a live installation.  It will come
up and Libre Office is already installed with all the extensions and
plugins and so forth to make it talk with Orca.  Save your files onto
a flash drive or your hard drive so you can pick up where you left off
next time you power up your pc.  When you are done working for that
day, simply power off your machine and take out the cd.  When it turns
back on, it's going to run windows and be none the wiser that you had
Ubuntu running things for a time.


I know this sounds complex but, if you are approaching a deadline, you
need to do something to get the ball rolling.  If this is not
something you want to tackle, I seriously advise you to put aside any
qualms you have about MS Office and load it up.  You need something
that will get the job done.  Period, end of story.  If your job is on
the line, it is no time to be making statements about software freedom
and so forth by sticking to Open or Libre Office in hopes that you'll
stumble on some magic setup combination that'll get you going.  I know
what I am saying will probably upset some people who read this list
but, frankly, if I have to choose between giving somebody advice that
will keep them employed or chant the party line, the party line will
just have to get on as best it can.  I like free and open source
software.  If it were up to me, I'd switch each and everything I use
to run a fully Libre system at work and at home.  Thing is, there are
too many a11y gaps all over the place for you to do that productively
and efficiently without investing a large amount of time in learning
all sorts of workarounds when there are ways to do what needs toing in
proprietary software that you can meld with your open source stuff.  I
have found this approach to be much more powerful than the sum of its
parts.

Best regards,
Alex M

On 8/29/12, Tom Randall <kf6ddt@comcast.net> wrote:
Hi Alex and all.

Well that certainly might be something I will consider doing at some point.

Truthfully I've played with Linux on and off over the years and if I really

thought it could replace winblows for me I would probably switch in a new
york minute.  However when looking into it it looked like you had to damn
near be a computer science major to get it fully up and accessible, you had

to install extensions for this, front ends for that, read through reams of
docs to figure out how to do all this, and so on and so on.  It just looked

like it was going to take way more time and effort than I was or am willing

to put into it.  So maybe when I can pick up a little bigger hd for this
system running both Linux and windows on here might be the way to go.

This is not the place to start a windows vs. Linux debate and I assure you
all I am not trying to start one, if people have the time and patience to
get Linux up and running and it works for them believe me I think that is
great and wish I could go that route.  As to which platform is better
there's not much of a debate about that as far as I am concerned, in many
ways Linux is superior.  Alex as you said in another message and I agree
with this, to me the platform is secondary, however I need something that
works, that is the bottom line.  I hope I don't end up having to install
more MS bloatware on this system, it runs pretty decent the way it is, but
I'm running out of time and excuses about getting this paperwork done and
need a reliable and accessible way to do it.

I may try going back to open office, the thing that worries me is the calc,

that is what seems to be the most problematic for me at the moment. These
guys where I work are XL freaks and I absolutely have to have a way to work

with XL spreadsheets.  I do also have a MacBook with LO on it so I may see
if the calc is any better on there.

Best regards,

Tom

-----Original Message-----
From: Alex Midence
Sent: Wednesday, August 29, 2012 1:46 PM
To: Tom Randall
Subject: Re: [libreoffice-accessibility] Java nightmare & FAQ wiki-page

Very sorry, Tom.  I'm fresh out.  Open office may just be your last
bet.  I understand they sucked in all the Lotus Symphony code.
Symphony has a reputation for being quite accessible.  I don't know if
Libreoffice got this code or not.  Hate to say it but, it just may
have to be MS Office for you in windows.  The only other thing you
might try is using it the way *I* do but it's a bit complex:

1.  Install vmware.
2.  Create a Linux virtual machine (Ubuntu works well)
3.  Access Libreoffice in Linux as a guest operating system with Orca
as the screen reader.
4.  Keep windows as the host system and go back and forth between it
and Linux in the course of your day.

I use Libreoffice at home.  This is how I do it because I have some
windows apps I find quite useful and because browsing the web in Linux
will exhaust the patience of the saintliest of men.  The accessible
experience in Linux for Libre Office and Open Ofice is like night and
day compared to Windows.  So, for me, I use MsOffice when I'm in
windows land and Libre office in Linux.

Regards,
Alex


On 8/29/12, Tom Randall <kf6ddt@comcast.net> wrote:
Hi Alex.

Oh no worries about asking.  So far as I can tell the assistive
technology
checkbox is checked, I've tried it both ways since I cannot tell for sure

if

the box is checked since checkboxes are not being read.

This is the only program I am aware of that I am using that requires java
accessibility so I have nothing else to test it with.

I only have the latest jre installed, that was the first thing I tried
when

all this started, totally removed java from the system and cleaned up the
registry and did a fresh install.  This is a 32-bit system so that is not

an

issue.  If you've any ideas I'd be glad for them.

Best regards,

Tom

-----Original Message-----
From: Alex Midence
Sent: Wednesday, August 29, 2012 1:00 PM
To: 'Tom Randall'
Subject: RE: [libreoffice-accessibility] Java nightmare & FAQ wiki-page

Tom, I hate to ask, I'm sure you've taken care of this but ... um .. you
do
have screen reader/assistive technology enabled in the options menu
right?
I guess the other question is, how are other Java applications working
for
you?  Are you able to use other stuff that relies on the access bridge?
Aso, how many JRE's do you have on there?  I once had a problem with the
java access bridge that turned out to be caused by me having 3 jre's on
my
system and the JAB being on only two out of those.  Guess which one I was
using?  Installing it by hand in the third one fixed it for me but only
after much frustration and wasted time.

Alex




-----Original Message-----
From: Tom Randall [mailto:kf6ddt@comcast.net]
Sent: Wednesday, August 29, 2012 1:57 PM
To: Alex Midence
Subject: Re: [libreoffice-accessibility] Java nightmare & FAQ wiki-page

hi Alex, Tom and all.

Yes I am indeed on this list.  Here's the latest update.  I forced Java
to
do an update so that it would presumably get the latest version with the
Jab
pre-installed so I wouldn't have to monkey with that.  This appeared to
go
fine and I was able to turn on the Jab via the Windows control panel.
When
I run LO 3.60 and go into the java it shows that java is correctly
installed
with accessibility.  However it behaves exactly the same, menus are not
read
and neither is the state of checkboxes.  When I have the energy I am
going
to totally uninstall it and delete all data and install the latest
version
from the site and see if that works.

I used Open Office for quite some time and as you said found it pretty
acceptable in most cases and I suppose I could go back to that if
necessary.

I just figured it'd be better to be running something that is still being
developed and worked on.  Fortunately I do not need the presentation
package
so whether impress is accessible or not doesn't matter to me all that
much
although I would hope this will be worked on.  What I absolutely have to
have is writer and calc working, I have to be able to process documents
and
do invoices for my work.

So that's where I am now.

Regards,

Tom

-----Original Message-----
From: Alex Midence
Sent: Wednesday, August 29, 2012 11:22 AM
To: Tom Davies
Cc: accessibility@global.libreoffice.org ; Tom Randall
Subject: Re: [libreoffice-accessibility] Java nightmare & FAQ wiki-page

Hi,

Sorry to hear you are having such a time of it.  I don't know how open
you
are to this suggestion but, I've had success with Open Office in Windows.
Libreoffice has not worked for me.  I use Jaws and NVDA.  I have never
used
Supernova so, I don't know how it will react but Openoffice 3.6 (I think
that's the latest release), worked ok in writer.  Jaws even read Writer
ok.
NVDA did just wonderfully with it.
Calc was usable in NVDA but not in Jaws so, I don't know how it'll do in
Supernova.  Impress was totally unusable pretty much all around.
It was a bummer for me.  I'm a corporate trainer.  I get up in front of
groups of people with presentations up on a projecter and gas away at
them
about this and that.  Thus far, I hate to say it but Microsoft Powerpoint
is
the best and most accessible presentation product for someone in my
situation.  Impress has yet to Impress me in either Libre or Open Office.

hth,
Alex M



On 8/29/12, Tom Davies <tomdavies04@yahoo.co.uk> wrote:
Hi :)
I am not sure if Tom Randall is on this list.  You guys seem to have
solved a lot of these java issues so i thought forwarding the thread
here just in case you can help hi8m where others can't.

Also i made a rough wiki-page that is intended to help people solve
java issues.
https://wiki.documentfoundation.org/Faq/Java
I think it might need sub-pages to deal with issues such as the bridge.
If
you are able to radically rewrite the wiki-page to make it useful and
need me to make extra sub-pages then please just let me know through
this
list.
It sometimes takes me a couple of days to react so my apologies for
being so slack!  If you are new to wiki-editing then i might be able
to help with formatting and other issues.
Regards from
Tom :)






-- Unsubscribe instructions: E-mail to accessibility+help@global.libreoffice.org
Problems? http://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/
Posting guidelines + more: http://wiki.documentfoundation.org/Netiquette
List archive: http://listarchives.libreoffice.org/global/accessibility/
All messages sent to this list will be publicly archived and cannot be deleted




-- Unsubscribe instructions: E-mail to accessibility+help@global.libreoffice.org
Problems? http://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/
Posting guidelines + more: http://wiki.documentfoundation.org/Netiquette
List archive: http://listarchives.libreoffice.org/global/accessibility/
All messages sent to this list will be publicly archived and cannot be deleted 

-- Unsubscribe instructions: E-mail to accessibility+help@global.libreoffice.org
Problems? http://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/
Posting guidelines + more: http://wiki.documentfoundation.org/Netiquette
List archive: http://listarchives.libreoffice.org/global/accessibility/
All messages sent to this list will be publicly archived and cannot be deleted


-- 
Unsubscribe instructions: E-mail to accessibility+help@global.libreoffice.org
Problems? http://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/
Posting guidelines + more: http://wiki.documentfoundation.org/Netiquette
List archive: http://listarchives.libreoffice.org/global/accessibility/
All messages sent to this list will be publicly archived and cannot be deleted

Context


Privacy Policy | Impressum (Legal Info) | Copyright information: Unless otherwise specified, all text and images on this website are licensed under the Creative Commons Attribution-Share Alike 3.0 License. This does not include the source code of LibreOffice, which is licensed under the Mozilla Public License (MPLv2). "LibreOffice" and "The Document Foundation" are registered trademarks of their corresponding registered owners or are in actual use as trademarks in one or more countries. Their respective logos and icons are also subject to international copyright laws. Use thereof is explained in our trademark policy.