Another configure to test ...
For cloph - I've wrapped findhome in a "os ne darwin" so hopefully the
old mac stuff will fire fine :-)
Cheers,
Wol
On 05/12/10 22:36, Norbert Thiebaud wrote:
the following patch worked for MacOS
diff --git a/configure.in b/configure.in
index d875950..ea6bea1 100644
--- a/configure.in
+++ b/configure.in
@@ -3674,8 +3674,8 @@ fi
if test "$SOLAR_JAVA" != ""; then
dnl first check if we have been asked to autodetect JAVA_HOME
with a recent gij
- if test "$JDK" = "gcj" -a -z "$JAVA_HOME"; then
- if test "x$with_jdk_home" = "x" -a "$_gij_longver" -ge "40200"; then
+ if test "$JAVA_HOME" = "/usr" -o -z "$JAVA_HOME"; then
+ if test "x$with_jdk_home" = "x"; then
cat > findhome.java <<_ACEOF
[import java.io.File;
@@ -3703,6 +3703,9 @@ _ACEOF
AC_MSG_CHECKING([if gij knows its java.home])
JAVA_HOME=`$JAVAINTERPRETER findhome`
if test $? = 0 && test "$JAVA_HOME" != "" ; then
+ if test "$_os" = "Darwin" ; then
+ JAVA_HOME="$JAVA_HOME/Home"
+ fi
AC_MSG_RESULT([$JAVA_HOME])
else
echo "configure: java test failed" >&5
On Sun, Dec 5, 2010 at 4:17 PM, Wols Lists <antlists@youngman.org.uk> wrote:
On 05/12/10 20:50, Wols Lists wrote:
On 05/12/10 20:40, Caolán McNamara wrote:
On Sun, 2010-12-05 at 17:24 +0000, Wols Lists wrote:
Yup. findhome found the right place (or I assume it did).
/opt/icedtea6-bin-1.9.1
Yeah, so what I'd like to see is that findhome (or something like it) is
the normal way to get the jdk home when one is not set via the
--with-jdk-home. And if that fails for some reason then fall back to the
"get the path to java and cut bits off it and hope for the best" route
rather than trying that first.
IIRC I tried this before, and there was some cockup under MacOSX, so if
someone on MacOSX could see what findhome says and if its correct/wrong
vs what works correctly there, that'd be helpful.
HMMM!!!
It's the MacOS test that's messing up gentoo ...!
So what someone (me? you?) might do is just put the findhome test in
regardless, or put it at the start with a wrapper "if OS != mac".
(
I'd actually rather it tried "whereis" first, but I don't think that's
always there, and my sed-awk-whatsit-fu isn't up to that...
anthony@ashdown ~/gitstuff/lotest $ whereis javac
javac: /usr/bin/javac /opt/icedtea6-bin-1.9.1/bin/javac
anthony@ashdown ~/gitstuff/lotest $
It seems so simple - take the last entry and strip the last two bits off
- bet there's a snag ...
)
Let's wait til tomorrow night to see if anyone on a mac bites, and if
they don't we can try and do this and get it in the build.
Cheers,
Wol
_______________________________________________
LibreOffice mailing list
LibreOffice@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/libreoffice
_______________________________________________
LibreOffice mailing list
LibreOffice@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/libreoffice
dnl configure.in serves as input for the GNU autoconf package
dnl in order to create a configure script.
AC_INIT([LibreOffice], [3.3],,, [http://documentfoundation.org/])
AC_PREREQ(2.50)
echo "$@" >config.parms
dnl ===================================================================
dnl Optional Features (--enable/disable-)
dnl ===================================================================
dnl ---------- Extensions ----------
AC_ARG_ENABLE(ext-barcode,
AS_HELP_STRING([--enable-ext-barcode],
[Enables the Barcode extension.]),
,)
AC_ARG_ENABLE(ext-diagram,
AS_HELP_STRING([--enable-ext-diagram],
[Enables the Diagram extension.]),
,)
AC_ARG_ENABLE(ext-google-docs,
AS_HELP_STRING([--enable-ext-google-docs],
[Download and enables the Google Documents extension.]),
,)
AC_ARG_ENABLE(ext-hunart,
AS_HELP_STRING([--enable-ext-hunart],
[Enables the Hungarian Cross-reference Toolbar extension.]),
,)
AC_ARG_ENABLE(ext-lightproof,
AS_HELP_STRING([--enable-ext-lightproof],
[Enables the Lightproof extension.]),
,)
AC_ARG_ENABLE(ext-mysql-connector,
AS_HELP_STRING([--enable-ext-mysql-connector],
[Enables the build of the MySQL Connector/LibO extension. This requires
access to the MySQL Connector/C (aka libmysql) to be given, too, with
either the --with-system-mysql or --with-libmysql-path option.]),
,)
AC_ARG_ENABLE(ext-nlpsolver,
AS_HELP_STRING([--enable-ext-nlpsolver],
[Download and enables the NLPSolver extension.]),
,)
AC_ARG_ENABLE(ext-numbertext,
AS_HELP_STRING([--enable-ext-numbertext],
[Enables the Numbertext extension.]),
,)
AC_ARG_ENABLE(ext-oooblogger,
AS_HELP_STRING([--enable-ext-oooblogger],
[Download and enables the OOo Blogger extension.]),
,)
AC_ARG_ENABLE(ext-pdfimport,
AS_HELP_STRING([--enable-ext-pdfimport],
[Enables the PDF Import extension and xpdf.]),
,)
AC_ARG_ENABLE(ext-presenter-console,
AS_HELP_STRING([--enable-ext-presenter-console],
[Enables the Presenter Console extension.]),
,)
AC_ARG_ENABLE(ext-presenter-minimizer,
AS_HELP_STRING([--enable-ext-presenter-minimizer],
[Enables the Presentation Minimizer extension.]),
,)
AC_ARG_ENABLE(ext-presenter-ui,
AS_HELP_STRING([--enable-ext-presenter-ui],
[Enables extra functionality during slideshows, e.g. selecting pen color.]),
,)
AC_ARG_ENABLE(ext-report-builder,
AS_HELP_STRING([--enable-ext-report-builder],
[Enables the build of the Report Builder extension.]),
,)
AC_ARG_ENABLE(ext-typo,
AS_HELP_STRING([--enable-ext-typo],
[Enables the Typography Toolbar extension.]),
,)
AC_ARG_ENABLE(ext-validator,
AS_HELP_STRING([--enable-ext-validator],
[Enables the Validator extension.]),
,)
AC_ARG_ENABLE(ext-watch-window,
AS_HELP_STRING([--enable-ext-watch-window],
[Enables the Watch Window extension to Calc.]),
,)
AC_ARG_ENABLE(ext-wiki-publisher,
AS_HELP_STRING([--enable-ext-wiki-publisher],
[Enables the Wiki Publisher extension.]),
,)
dnl ---------- *** ----------
AC_ARG_ENABLE(graphite,
AS_HELP_STRING([--enable-graphite],
[Enables the compilation of Graphite smart font rendering.]),
,)
AC_ARG_ENABLE(ldap,
AS_HELP_STRING([--disable-ldap],
[Disables the use of LDAP backend via Netscape/Mozilla or OpenLDAP LDAP SDK]),
,)
AC_ARG_ENABLE(fetch-external,
AS_HELP_STRING([--disable-fetch-external],
[Disables fetching external tarballs from web sources.]),
,)
AC_ARG_ENABLE(lockdown,
AS_HELP_STRING([--disable-lockdown],
[Disables the gconf integration work in LibO.]),
,enable_lockdown=yes)
AC_ARG_ENABLE(vba,
AS_HELP_STRING([--disable-vba],
[Disables the vba compatibility feature.]),
,)
AC_ARG_ENABLE(pch,
AS_HELP_STRING([--enable-pch],
[EXPERIMENTAL: Enables precompiled header support for C++.]),
,)
AC_ARG_ENABLE(hids,
AS_HELP_STRING([--disable-hids],
[Disables generation of HelpId lists.]),
,enable_hids=yes)
AC_ARG_ENABLE(mozilla,
AS_HELP_STRING([--disable-mozilla],
[LibO usually includes a strangely hacked up mozilla binary for your
platform, to build without this version, use this option.]),
,enable_mozilla=yes)
AC_ARG_ENABLE(epm,
AS_HELP_STRING([--enable-epm],
[LibO includes self-packaging code, that requires epm, however epm is
useless for large scale package building.]),
,enable_epm=no)
AC_ARG_ENABLE(activex_component,
AS_HELP_STRING([--disable-activex-component],
[Remove support for ActiveX embedding of LibO.]),
,enable_activex_component=yes)
AC_ARG_ENABLE(odk,
AS_HELP_STRING([--disable-odk],
[LibO includes an ODK, office development kit which some packagers may
with to build without.]),
,enable_odk=yes)
AC_ARG_ENABLE(mathmldtd,
AS_HELP_STRING([--disable-mathmldtd],
[Disable mathmldtd (useful for distributions that want to avoid
packaging it).]),
,enable_mathmldtd=yes)
AC_ARG_ENABLE(evolution2,
AS_HELP_STRING([--enable-evolution2],
[Allows the built-in evolution 2 addressbook connectivity build to be
enabled.]),
,)
AC_ARG_ENABLE(cups,
AS_HELP_STRING([--disable-cups],
[Disable cups support in the psprint project.]),
,enable_cups=yes)
AC_ARG_ENABLE(fontconfig,
AS_HELP_STRING([--disable-fontconfig],
[Disable support for the fontconfig library.]),
,enable_fontconfig=yes)
AC_ARG_ENABLE(directx,
AS_HELP_STRING([--disable-directx],
[Remove DirectX implementation for the new XCanvas interface.
The DirectX support requires more stuff installed on Windows to
compile. (DirectX SDK, GDI+ libs)]),
,enable_directx=yes)
AC_ARG_ENABLE(activex,
AS_HELP_STRING([--disable-activex],
[Disable the use of ActiveX for windows build.])
[
This switch is mandatory when using VC++ 2008 Express.
],
,)
AC_ARG_ENABLE(atl,
AS_HELP_STRING([--disable-atl],
[Disable the use of ATL for windows build.])
[
This switch is mandatory when using VC++ 2008 Express.
],
,)
AC_ARG_ENABLE(symbols,
AS_HELP_STRING([--enable-symbols],
[Include debugging symbols in output. WARNING - a complete build needs
8 Gb of space and takes much longer (enables -g compiler flag).])
[
--enable-symbols=SMALL
sets the gcc -g1 setting which is smaller.
Enabling symbols disables the stripping of the solver
(--disable-strip-solver).
],
,)
AC_ARG_ENABLE(strip-solver,
AS_HELP_STRING([--disable-strip-solver],
[Disable the stripping of the solver. By default the solver is stripped
unless a build with debugging symbols (--enable-symbols) is requested.])
[
This switch allows to override this setting.
],
,)
AC_ARG_ENABLE(werror,
AS_HELP_STRING([--enable-werror],
[Turn warnings to errors. (Has no effect in modules where the treating
of warnings as errors is disabled explicitely.)]),
,)
AC_ARG_ENABLE(debug,
AS_HELP_STRING([--enable-debug],
[Include debugging symbols from --enable-symbols plus extra debugging
code. Extra large build! (enables -g compiler flag and dmake debug=true)
If you need even more verbose output, build a module with
"build -- debug=true dbglevel=2".]),
,)
AC_ARG_ENABLE(dbgutil,
AS_HELP_STRING([--enable-dbgutil],
[Include additional debugging utilities, such as assertions, object
counting, etc. Larger build. Independent from --enable-debug]),
,)
AC_ARG_ENABLE(crashdump,
AS_HELP_STRING([--enable-crashdump],
[Enable the crashdump feature code.]),
,)
AC_ARG_ENABLE(gtk,
AS_HELP_STRING([--disable-gtk],
[Determines whether to use Gtk+ vclplug on platforms where Gtk+ is available.]),
,enable_gtk=yes)
AC_ARG_ENABLE(systray,
AS_HELP_STRING([--disable-systray],
[Determines whether to build the systray quickstarter.]),
,enable_systray=yes)
AC_ARG_ENABLE(unix-qstart,
AS_HELP_STRING([--disable-unix-qstart],
[On UNIX systems, we can enable a faster splash app that accelerates
startup, if we can link to the system libpng, use this if you are
a Linux Distro packager.]),
,enable_unix_quickstarter=yes)
AC_ARG_ENABLE(broffice,
AS_HELP_STRING([--disable-broffice],
[When disabled, broffice specific branding artwork for use in the pt_BR
locale is removed, giving uniform branding.]),
,enable_broffice=yes)
AC_ARG_ENABLE(cairo,
AS_HELP_STRING([--disable-cairo],
[Determines whether to use Cairo library on platforms where Cairo is
available.]),
,enable_cairo=yes)
AC_ARG_ENABLE(opengl,
AS_HELP_STRING([--disable-opengl],
[Determines whether to build the OpenGL 3D slide transitions component.]),
,enable_opengl=yes)
AC_ARG_ENABLE(dbus,
AS_HELP_STRING([--enable-dbus],
[Determines whether to enable presentation mode screensaver control
under GNOME via DBUS.]),
,enable_dbus=no)
AC_ARG_ENABLE(gconf,
AS_HELP_STRING([--disable-gconf],
[Determines whether to use the GConf support.]),
,enable_gconf=yes)
AC_ARG_ENABLE(gnome-vfs,
AS_HELP_STRING([--disable-gnome-vfs],
[Determines whether to use the Gnome Virtual Filing System on platforms
where that VFS is available.]),
,enable_gnome_vfs=yes)
AC_ARG_ENABLE(gio,
AS_HELP_STRING([--enable-gio],
[Determines whether to use the GIO support.]),
,enable_gio=no)
AC_ARG_ENABLE(static-gtk,
AS_HELP_STRING([--enable-static-gtk],
[Modules that are linked against gtk libraries use the static libraries
instead of the dynamic ones. (Enables -Bstatic linker flag for gtk libraries.)]),
,)
AC_ARG_ENABLE(layout,
AS_HELP_STRING([--enable-layout],
[Enable the compilation and use of layout dialogs.]),
,)
AC_ARG_ENABLE(build-mozilla,
AS_HELP_STRING([--disable-build-mozilla],
[Use this option if you do not want to build the mozilla components from
the mozilla source code but take precompiled zips.]),
,)
AC_ARG_ENABLE(nss_module,
AS_HELP_STRING([--disable-nss-module],
[Whether to use provided NSS module.]),
,enable_nss_module=yes)
AC_ARG_ENABLE(kde,
AS_HELP_STRING([--enable-kde],
[Determines whether to use Qt3/KDE3 vclplug on platforms where Qt3 and
KDE3 are available.]),
,)
AC_ARG_ENABLE(kdeab,
AS_HELP_STRING([--disable-kdeab],
[Disable the KDE3 address book support.]),
,
if test "$enable_kde" = "yes"; then
enable_kdeab=yes;
fi
)
AC_ARG_ENABLE(kde4,
AS_HELP_STRING([--enable-kde4],
[Determines whether to use Qt4/KDE4 vclplug on platforms where Qt4 and
KDE4 are available. May be used with --enable-kde if you want to support
both KDE3 and KDE4.]),
,)
AC_ARG_ENABLE(binfilter,
AS_HELP_STRING([--enable-binfilter],
[Enable legacy binary file formats filters build.]),
,enable_binfilter=no
)
AC_ARG_ENABLE(rpath,
AS_HELP_STRING([--disable-rpath],
[Disable the use of relative paths in shared libraries.]),
,)
AC_ARG_ENABLE(crypt-link,
AS_HELP_STRING([--disable-crypt-link],
[Disable linking with libcrypt instead of dynamically open it (needed for
ancient GNU/Linux distributions without crypt()/libcrypt).]),
,enable_crypt_link=yes)
AC_ARG_ENABLE(xrender-link,
AS_HELP_STRING([--enable-xrender-link],
[Link with libXrender instead of dynamically open it.]),
,)
AC_ARG_ENABLE(randr,
AS_HELP_STRING([--disable-randr],
[Disable RandR support in the vcl project.]),
,enable_randr=yes)
AC_ARG_ENABLE(randr-link,
AS_HELP_STRING([--disable-randr-link],
[Disable linking with libXrandr, instead dynamically open it at runtime.]),
,enable_randr_link=yes)
AC_ARG_ENABLE(gstreamer,
AS_HELP_STRING([--disable-gstreamer],
[Disable building the gstreamer avmedia backend.]),
,enable_gstreamer=yes)
AC_ARG_ENABLE(neon,
AS_HELP_STRING([--disable-neon],
[Disable neon and the compilation of webdav binding.]),
,)
AC_ARG_ENABLE(Xaw,
AS_HELP_STRING([--disable-Xaw],
[Disables the use of Xaw for the Netscape/Mozilla plugin.]),
,)
AC_ARG_ENABLE(gcjaot,
AS_HELP_STRING([--enable-gcjaot],
[Build with[[out]] using Ahead of Time java compilation support to speed
up buildsi by compiling the jars also to native code.. --enable-gcjaot
is only known to work with bytecode created with gcj or ecj.]),
,)
AC_ARG_ENABLE(check-only,
AS_HELP_STRING([--enable-check-only],
[Use this option option if you just want to check your environment.
This option stops the generation of an ????env.set.])
[
Usage: --enable-check-only=yes
],
,)
AC_ARG_ENABLE(ccache-skip,
AS_HELP_STRING([--enable-ccache-skip],
[Allow the use of --ccache-skip to escape compiler flags that would
otherwise prevent caching of the result (currently used on Mac only)
NOTE: requires patched version because of a bug in ccache (see issue
104567 for details and patch) explicitly enable if your version of
ccache doesn't identify as version 2.4_OOo. (default=auto)]),
,enable_ccache_skip=auto)
AC_ARG_ENABLE(build-unowinreg,
AS_HELP_STRING([--enable-build-unowinreg],
[Do not use the prebuilt unowinreg.dll. Build it instead. The MinGW C++
compiler is needed on Linux.])
[
Usage: --enable-build-unowinreg
],
,)
AC_ARG_ENABLE(verbose,
AS_HELP_STRING([--enable-verbose],
[Increase build verbosity.])[
--disable-verbose Decrease build verbosity.],
,)
AC_ARG_ENABLE(dependency-tracking,
AS_HELP_STRING([--enable-dependency-tracking],
[Do not reject slow dependency extractors.])[
--disable-dependency-tracking
Disables generation of dependency information.
Speed up one-time builds.],
,)
AC_ARG_ENABLE(icecream,
AS_HELP_STRING([--enable-icecream],
[Use the 'icecream' distributed compiling tool to speedup the compilation.
It defaults to /opt/icecream for the location of the icecream gcc/g++
wrappers, you can override that using --with-gcc-home=/the/path switch.]),
,)
AC_ARG_ENABLE(zenity,
AS_HELP_STRING([--disable-zenity],
[Do not display a build icon in the notification area (on unix) during build.]),
,enable_zenity=yes)
AC_ARG_ENABLE(cl-x64,
AS_HELP_STRING([--enable-cl-x64],
[Use the Microsoft C/C++ x64 compiler instead of the default x86 one.]),
,)
AC_ARG_ENABLE(extra-gallery,
AS_HELP_STRING([--enable-extra-gallery],
[Add extra gallery content.]),
,)
AC_ARG_ENABLE(extra-template,
AS_HELP_STRING([--enable-extra-template],
[Add extra temaplte content.]),
,)
AC_ARG_ENABLE(extra-sample,
AS_HELP_STRING([--enable-extra-sample],
[Add extra sample content.]),
,)
AC_ARG_ENABLE(extra-font,
AS_HELP_STRING([--enable-extra-font],
[Add extra font content.]),
,)
dnl ---------- Deprecated since 2010-11-05 ----------
AC_ARG_ENABLE(mysql-connector,
AS_HELP_STRING([--enable-mysql-connector],
[Deprecated: use --enable-ext-mysql-connector instead.]),
if test -z "$enable_ext_mysql_connector"; then
enable_ext_mysql_connector=$enable_mysql_connector;
fi ,
)
AC_ARG_ENABLE(presenter-extra-ui,
AS_HELP_STRING([--enable-presenter-extra-ui],
[Deprecated: use --enable-ext-presenter-ui instead.]),
if test -z "$enable_ext_presenter_ui"; then
enable_ext_presenter_ui=$enable_presenter_extra_ui;
fi ,
)
AC_ARG_ENABLE(minimizer,
AS_HELP_STRING([--enable-minimizer],
[Deprecated: use --enable-ext-presenter-minimizer instead.]),
if test -z "$enable_ext_presenter_minimizer"; then
enable_ext_presenter_minimizer=$enable_minimizer;
fi ,
)
AC_ARG_ENABLE(presenter-console,
AS_HELP_STRING([--enable-presenter-console],
[Deprecated: use --enable-ext-presenter-console instead.]),
if test -z "$enable_ext_presenter_console"; then
enable_ext_presenter_console=$enable_presenter_console;
fi ,
)
AC_ARG_ENABLE(pdfimport,
AS_HELP_STRING([--enable-pdfimport],
[Deprecated: use --enable-ext-pdfimport instead.]),
if test -z "$enable_ext_pdfimport"; then
enable_ext_pdfimport=$enable_pdfimport;
fi ,
)
AC_ARG_ENABLE(wiki-publisher,
AS_HELP_STRING([--enable-wiki-publisher],
[Deprecated: use --enable-ext-wiki-publisher instead.]),
if test -z "$enable_ext_wiki_publisher"; then
enable_ext_wiki_publisher=$enable_wiki_publisher;
fi ,
)
AC_ARG_ENABLE(report-builder,
AS_HELP_STRING([--enable-report-builder],
[Deprecated: use --enable-ext-report-builder instead.]),
if test -z "$enable_ext_report_builder"; then
enable_ext_report_builder=$enable_report_builder;
fi ,
)
dnl ===================================================================
dnl Optional Packages (--with/without-)
dnl ===================================================================
AC_ARG_WITH(gnu-patch,
AS_HELP_STRING([--with-gnu-patch],
[Specify location of GNU patch on Solaris or FreeBSD.]),
,)
AC_ARG_WITH(gnu-cp,
AS_HELP_STRING([--with-gnu-cp],
[Specify location of GNU cp on Solaris or FreeBSD.]),
,)
AC_ARG_WITH(system-graphite,
AS_HELP_STRING([--with-system-graphite],
[Use graphite library already installed on system.]),
,)
AC_ARG_WITH(external-tar,
AS_HELP_STRING([--with-external-tar=<TARFILE PATH>],
[Specify path to tarfiles manually.]),
TARFILE_LOCATION=$withval ,
)
AC_ARG_WITH(linked-git,
AS_HELP_STRING([--with-linked-git=<OTHER_CLONE_DIR>],
[Specify another checkout's clonedir to re-use. This makes use of
git-new-workdir, and saves a lot of diskspace when having multiple
trees side-by-side.]),
GIT_LINK_SRC=$withval ,
)
AC_ARG_WITH(openldap,
AS_HELP_STRING([--with-openldap],
[Enables the use of the OpenLDAP LDAP SDK instead of the Netscape/Mozilla one.]),
,)
AC_ARG_WITH(vba-package-format,
AS_HELP_STRING([--with-vba-package-format],
[Specify package format for vba compatibility api. Specifying "builtin"
means the api component and associated type library are part of the
installation set. Specifying "extn" creates an uno extension that is
part of the installation set (located in the program directory) that
MUST be optionly registered using either the unopkg executeable or the
extension manager gui.])
[
Note: "builtin" is the default, "extn" can cause
problems.
Usage: --with-vba-package-format="builtin" or
--with-vba-package-format="extn"
],
,)
AC_ARG_WITH(extension-integration,
AS_HELP_STRING([--with-extension-integration],
[It will integrate the builded extensions to the installer of the product.]),
,)
AC_ARG_WITH(fonts,
AS_HELP_STRING([--without-fonts],
[LibO includes some third-party fonts to provide a reliable basis for
help content, templates, samples, etc. When these fonts are already
known to be available on the system then you should use this option.]),
,)
AC_ARG_WITH(ppds,
AS_HELP_STRING([--without-ppds],
[Removes Postscript Printer definition files from LibreOffice
installation set, for people building for specific distributions where
PPDs are known to be already available (every recent distro with CUPS backend).]),
,)
AC_ARG_WITH(afms,
AS_HELP_STRING([--without-afms],
[Removes bitmap font files from LibreOffice installation set, for people
building for specific distributions where AFM files or TrueType Fonts
are known to be available.]),
,)
AC_ARG_WITH(epm,
AS_HELP_STRING([--with-epm],
[Decides which epm to use. Default is to use the one from the system if
one is built. When either this is not there or you say =internal epm
will be built.]),
,)
AC_ARG_WITH(package-format,
AS_HELP_STRING([--with-package-format],
[Specify package format(s) for LibO installsets. Default is the
"normal" one of the OS/Distribution. Possible values: aix, bsd, deb,
inst, tardist, osx, pkg, rpm, setld, native, portable, archive, dmg,
installed, msi. Example: --with-package-format="deb dmg"]),
,)
AC_ARG_WITH(system-stdlibs,
AS_HELP_STRING([--with-system-stdlibs],
[Use libstdc++/libgcc_s already on system.]),
,)
AC_ARG_WITH(system-cairo,
AS_HELP_STRING([--with-system-cairo],
[Use Cairo libraries already on system.]),
,)
AC_ARG_WITH(mozilla-version,
AS_HELP_STRING([--with-mozilla-version],
[Choose which version of mozilla to use while building mozilla.
(default=1.7.5) Note that not all versions are supported.]),
,)
AC_ARG_WITH(mozilla-toolkit,
AS_HELP_STRING([--with-mozilla-toolkit],
[Choose which GUI toolkit to use while building mozilla components. (default=gtk2)]),
,)
AC_ARG_WITH(myspell-dicts,
AS_HELP_STRING([--without-myspell-dicts],
[Removes myspell dictionaries from LibreOffice installation set, for
people building for specific distributions where the myspell dictionaries
are installed from other sources.]),
,)
AC_ARG_WITH(system-dicts,
AS_HELP_STRING([--with-system-dicts],
[Use dictionaries from system paths- Specify them via
--with-{dict,hyph,thes}-path=/path if you want to override the default ones.]),
,)
AC_ARG_WITH(external-dict-dir,
AS_HELP_STRING([--with-external-dict-dir],
[Specify external dictionary dir.]),
,)
AC_ARG_WITH(external-hyph-dir,
AS_HELP_STRING([--with-external-hyph-dir],
[Specify external hyphenation pattern dir.]),
,)
AC_ARG_WITH(external-thes-dir,
AS_HELP_STRING([--with-external-thes-dir],
[Specify external thesaurus dir.]),
,)
AC_ARG_WITH(system-libs,
AS_HELP_STRING([--with-system-libs],
[Use libs already on system -- enables all --with-system-* flags except
mozilla and odbc/sane/xrender-header(s).]),
,)
AC_ARG_WITH(system-headers,
AS_HELP_STRING([--with-system-headers],
[Use headers already on system -- enables all --with-system-* flags for
external packages whose headers are the only entities used i.e.
boost/vigra/odbc/sane/xrender-header(s).]),
,)
AC_ARG_WITH(system-jars,
AS_HELP_STRING([--without-system-jars],
[When building with --with-system-libs, also the needed jars are expected
on the system. Use this to disable that (except for the db case where
--with-system-db *has to* imply using the db.jar from there, too).]),
,)
AC_ARG_WITH(system-zlib,
AS_HELP_STRING([--with-system-zlib],
[Use zlib already on system.]),
,)
AC_ARG_WITH(system-openssl,
AS_HELP_STRING([--with-system-openssl],
[Use OpenSSL already on system.]),
,)
AC_ARG_WITH(system-jpeg,
AS_HELP_STRING([--with-system-jpeg],
[Use jpeg already on system.]),
,)
AC_ARG_WITH(system-expat,
AS_HELP_STRING([--with-system-expat],
[Use expat already on system.]),
,)
AC_ARG_WITH(system-libwpd,
AS_HELP_STRING([--with-system-libwpd],
[Use libwpd already on system.]),
,)
AC_ARG_WITH(system-libwps,
AS_HELP_STRING([--with-system-libwps],
[Use libwps already on system.]),
,)
AC_ARG_WITH(system-libwpg,
AS_HELP_STRING([--with-system-libwpg],
[Use libwpg already on system.]),
,)
AC_ARG_WITH(system-libxml,
AS_HELP_STRING([--with-system-libxml],
[Use libxml already on system.]),
,)
AC_ARG_WITH(system-python,
AS_HELP_STRING([--with-system-python],
[Use python already on system.]),
,with_system_python=yes)
AC_ARG_WITH(system-icu,
AS_HELP_STRING([--with-system-icu],
[Use icu already on system.]),
,)
AC_ARG_WITH(system-poppler,
AS_HELP_STRING([--with-system-poppler],
[Use system poppler. (only needed for pdfimport extension)]),
,)
AC_ARG_WITH(system-db,
AS_HELP_STRING([--with-system-db],
[Use berkeley db already on system.]),
,)
AC_ARG_WITH(system-lucene,
AS_HELP_STRING([--with-system-lucene],
[Use lucene already on system.]),
,)
AC_ARG_WITH(system-apache-commons,
AS_HELP_STRING([--with-system-apache-commons],
[Use apache commons libraries already on system.]),
,)
AC_ARG_WITH(lucene-core-jar,
AS_HELP_STRING([--with-lucene-core-jar=JARFILE],
[Specify path to jarfile manually.]),
LUCENE_CORE_JAR=$withval ,
)
AC_ARG_WITH(lucene-analyzers-jar,
AS_HELP_STRING([--with-lucene-analyzers-jar=JARFILE],
[Specify path to jarfile manually.]),
LUCENE_ANALYZERS_JAR=$withval ,
)
AC_ARG_WITH(system-mysql,
AS_HELP_STRING([--with-system-mysql],
[Use MySQL libraries already on system, for building the MySQL Connector/LibO
extension. Requires MYSQLCONFIG to point to the mysql_config executable.]),
,)
AC_ARG_WITH(libmysql-path,
AS_HELP_STRING([--with-libmysql-path],
[Use Connector/C (libmysql) installation for building the MySQL
Connector/LibO extension.])
[
Usage: --with-libmysql-path=<absolute path to
your Connector/C installation>
],
,)
AC_ARG_WITH(system-mysql-cppconn,
AS_HELP_STRING([--with-system-mysql-cppconn],
[Use MySQL C++ Connector libraries already on system.]),
,)
AC_ARG_WITH(system-hsqldb,
AS_HELP_STRING([--with-system-hsqldb],
[Use hsqldb already on system.]),
,)
AC_ARG_WITH(hsqldb-jar,
AS_HELP_STRING([--with-hsqldb-jar=JARFILE],
[Specify path to jarfile manually.]),
HSQLDB_JAR=$withval ,
)
AC_ARG_WITH(system-beanshell,
AS_HELP_STRING([--with-system-beanshell],
[Use beanshell already on system.]),
,)
AC_ARG_WITH(beanshell-jar,
AS_HELP_STRING([--with-beanshell-jar=JARFILE],
[Specify path to jarfile manually.]),
BSH_JAR=$withval ,
)
AC_ARG_WITH(commons-codec-jar,
AS_HELP_STRING([--with-commons-codec-jar=JARFILE],
[Specify path to jarfile manually.]),
COMMONS_CODEC_JAR=$withval ,
)
AC_ARG_WITH(commons-lang-jar,
AS_HELP_STRING([--with-commons-lang-jar=JARFILE],
[Specify path to jarfile manually.]),
COMMONS_LANG_JAR=$withval ,
)
AC_ARG_WITH(commons-httpclient-jar,
AS_HELP_STRING([--with-commons-httpclient-jar=JARFILE],
[Specify path to jarfile manually.]),
COMMONS_HTTPCLIENT_JAR=$withval ,
)
AC_ARG_WITH(commons-logging-jar,
AS_HELP_STRING([--with-commons-logging-jar=JARFILE],
[Specify path to jarfile manually.]),
COMMONS_LOGGING_JAR=$withval ,
)
AC_ARG_WITH(servlet-api-jar,
AS_HELP_STRING([--with-servlet-api-jar=JARFILE],
[Specify path to jarfile manually.]),
SERVLETAPI_JAR=$withval ,
)
AC_ARG_WITH(system-jfreereport,
AS_HELP_STRING([--with-system-jfreereport],
[Use JFreeReport already on system.]),
,)
AC_ARG_WITH(sac-jar,
AS_HELP_STRING([--with-sac-jar=JARFILE],
[Specify path to jarfile manually.]),
SAC_JAR=$withval ,
)
AC_ARG_WITH(libxml-jar,
AS_HELP_STRING([--with-libxml-jar=JARFILE],
[Specify path to jarfile manually.]),
LIBXML_JAR=$withval ,
)
AC_ARG_WITH(flute-jar,
AS_HELP_STRING([--with-flute-jar=JARFILE],
[Specify path to jarfile manually.]),
FLUTE_JAR=$withval ,
)
AC_ARG_WITH(jfreereport-jar,
AS_HELP_STRING([--with-jfreereport-jar=JARFILE],
[Specify path to jarfile manually.]),
JFREEREPORT_JAR=$withval ,
)
AC_ARG_WITH(liblayout-jar,
AS_HELP_STRING([--with-liblayout-jar=JARFILE],
[Specify path to jarfile manually.]),
LIBLAYOUT_JAR=$withval ,
)
AC_ARG_WITH(libloader-jar,
AS_HELP_STRING([--with-libloader-jar=JARFILE],
[Specify path to jarfile manually.]),
LIBLOADER_JAR=$withval ,
)
AC_ARG_WITH(libloader-jar,
AS_HELP_STRING([--with-libloader-jar=JARFILE],
[Specify path to jarfile manually.]),
LIBLOADER_JAR=$withval ,
)
AC_ARG_WITH(libformula-jar,
AS_HELP_STRING([--with-libformula-jar=JARFILE],
[Specify path to jarfile manually.]),
LIBFORMULA_JAR=$withval ,
)
AC_ARG_WITH(librepository-jar,
AS_HELP_STRING([--with-librepository-jar=JARFILE],
[Specify path to jarfile manually.]),
LIBREPOSITORY_JAR=$withval ,
)
AC_ARG_WITH(libfonts-jar,
AS_HELP_STRING([--with-libfonts-jar=JARFILE],
[Specify path to jarfile manually.]),
LIBFONTS_JAR=$withval ,
)
AC_ARG_WITH(libserializer-jar,
AS_HELP_STRING([--with-libserializer-jar=JARFILE],
[Specify path to jarfile manually.]),
LIBSERIALIZER_JAR=$withval ,
)
AC_ARG_WITH(libbase-jar,
AS_HELP_STRING([--with-libbase-jar=JARFILE],
[Specify path to jarfile manually.]),
LIBBASE_JAR=$withval ,
)
AC_ARG_WITH(system-saxon,
AS_HELP_STRING([--with-system-saxon],
[Use saxon already on system.]),
,)
AC_ARG_WITH(saxon-jar,
AS_HELP_STRING([--with-saxon-jar=JARFILE],
[Specify path to jarfile manually.]),
SAXON_JAR=$withval ,
)
AC_ARG_WITH(system-libxslt,
AS_HELP_STRING([--with-system-libxslt],
[Use libxslt already on system.]),
,)
AC_ARG_WITH(system-odbc,
AS_HELP_STRING([--with-system-odbc-headers],
[Use the odbc headers already on system.]),
,)
AC_ARG_WITH(system-sane,
AS_HELP_STRING([--with-system-sane-header],
[Use sane.h already on system.]),
,)
AC_ARG_WITH(system-xrender,
AS_HELP_STRING([--with-system-xrender-headers],
[Use XRender headers already on system.]),
,)
AC_ARG_WITH(system-mesa-headers,
AS_HELP_STRING([--with-system-mesa-headers],
[Use Mesa headers already on system.]),
,)
AC_ARG_WITH(system-curl,
AS_HELP_STRING([--with-system-curl],
[Use curl already on system.]),
,)
AC_ARG_WITH(system-boost,
AS_HELP_STRING([--with-system-boost],
[Use boost already on system.]),
,)
AC_ARG_WITH(system-mdds,
AS_HELP_STRING([--with-system-mdds],
[Use mdds already on system.]),
,)
AC_ARG_WITH(system-vigra,
AS_HELP_STRING([--with-system-vigra],
[Use vigra already on system.]),
,)
AC_ARG_WITH(system-neon,
AS_HELP_STRING([--with-system-neon],
[Use neon already on system.]),
,)
AC_ARG_WITH(system-hunspell,
AS_HELP_STRING([--with-system-hunspell],
[Use libhunspell already on system.]),
,)
AC_ARG_WITH(system-mythes,
AS_HELP_STRING([--with-system-mythes],
[Use mythes already on system.]),
,)
AC_ARG_WITH(system-altlinuxhyph,
AS_HELP_STRING([--with-system-altlinuxhyph],
[Use ALTLinuxhyph already on system.]),
,)
AC_ARG_WITH(system-lpsolve,
AS_HELP_STRING([--with-system-lpsolve],
[Use lpsolve already on system.]),
,)
AC_ARG_WITH(system-libtextcat,
AS_HELP_STRING([--with-system-libtextcat],
[Use libtextcat already on system.]),
,)
AC_ARG_WITH(external-libtextcat-data,
AS_HELP_STRING([--with-external-libtextcat-data],
[Use libtextcat data already on system.]),
,)
AC_ARG_WITH(system-cppunit,
AS_HELP_STRING([--with-system-cppunit],
[Use cppunit already on system.]),
,)
AC_ARG_WITH(system-redland,
AS_HELP_STRING([--with-system-redland],
[Use redland library already on system.]),
,)
AC_ARG_WITH(system-mozilla,
AS_HELP_STRING([--with-system-mozilla],
[Use mozilla already on system. Note that some components cannot be built
against a contemporary mozilla. The flavour used can be specified by
--with-system-mozilla=<flavour>. Supported are: libxul (default),
xulrunner, firefox, seamonkey, mozilla.]),
WITH_SYSTEM_MOZILLA=$withval ,
WITH_SYSTEM_MOZILLA=no)
AC_ARG_WITH(stlport,
AS_HELP_STRING([--with-stlport],
[The location that STLport is installed in. The STL header files are assumed
to be in stlport-home/stlport and the STLPort library in stlport-home/lib.])
[
Usage: --with-stlport=<abs. path to stlport home>
Warning!!, disabling using --without-stlport or
enabling using --with-stlport on a platform that
defaults to the opposite will break ABI compatability.
],
WITH_STLPORT=$withval ,
WITH_STLPORT=auto)
AC_ARG_WITH(jdk-home,
AS_HELP_STRING([--with-jdk-home],
[If you have installed JDK 1.3 or later on your system please supply the
path here. Note that this is not the location of the Java binary but the
location of the entire distribution.])
[
Usage: --with-jdk-home=<absolute path to JDK home>
],
,)
AC_ARG_WITH(gxx_include_path,
AS_HELP_STRING([--with-gxx-include-path],
[If you want to override the autodetected g++ include path.])
[
Usage: --with-gxx-include-path=<absolute path to
g++ include dir>
],
,)
AC_ARG_WITH(java,
AS_HELP_STRING([--with-java],
[Build with(out) Java support. If you use --without-java/--with-java=no
then the build will have no support for Java components, applets,
accessibility or XML filters.]),
if test "$withval" = "yes"; then
WITH_JAVA=java;
else
WITH_JAVA=$withval;
fi ,
WITH_JAVA=java)
AC_ARG_WITH(java_target_version,
AS_HELP_STRING([--with-java-target-version],
[Generate class files that will work on JVMs with the specified version.
For example, use --with-java-target-version=1.4 to make sure that the
application will work with JVM 1.4 even when compiled with JDK 1.5.])
[
This option is ignored when you compile with gcj/gij.
Usage: --with-java-target-version=<jvm version>
],
,)
AC_ARG_WITH(ant-home,
AS_HELP_STRING([--with-ant-home],
[If you have installed Jakarta Ant on your system, please supply the path here.
Note that this is not the location of the Ant binary but the location
of the entire distribution.])
[
Usage: --with-ant-home=<absolute path to Ant home>
],
,)
AC_ARG_WITH(junit,
AS_HELP_STRING([--with-junit],
[Specifies the JUnit 4 jar file to use for JUnit-based tests.
--without-junit disables those tests. Not relevant in the --without-java case.])
[
Usage: --with-junit=<absolute path to JUnit 4 jar>
],
,with_junit=yes)
AC_ARG_WITH(perl-home,
AS_HELP_STRING([--with-perl-home],
[If you have installed the Perl 5 Distribution, on your system, please
supply the path here. Note that this is not the location of the Perl
binary but the location of the entire distribution.])
[
Usage: --with-perl-home=<abs. path to Perl 5 home>
],
,)
AC_ARG_WITH(cl-home,
AS_HELP_STRING([--with-cl-home],
[For Windows NT users, please supply the path for the Microsoft C/C++
compiler. Note that this is not the location of the compiler binary but
the location of the entire distribution.])
[
Usage: --with-cl-home=<absolute path to Microsoft
C/C++ compiler home>
],
,)
AC_ARG_WITH(mspdb-path,
AS_HELP_STRING([--with-mspdb-path],
[For Microsoft C/C++ compiler users, please supply the path pointing to
the mspdb80.dll (if using Visual Studio 2008) or mspdb100.dl (if using
Visual Studio 2010).])
[
Usage: --with-mspdb-path=<path to
mspdb80.dll/mspdb100.dll>
],
,)
AC_ARG_WITH(midl-path,
AS_HELP_STRING([--with-midl-path],
[For Microsoft compiler users, please supply the path pointing to the midl.exe.])
[
Usage: --with-midl-path=<abs. path to midl.exe>
],
,)
AC_ARG_WITH(csc-path,
AS_HELP_STRING([--with-csc-path],
[For Windows builds, please supply the path pointing to the csc.exe.
Usually found automatically.])
[
Usage: --with-csc-path=<abs. path to csc.exe>
],
,)
AC_ARG_WITH(nsis-path,
AS_HELP_STRING([--with-nsis-path],
[For Windows users, please supply the path to the "Nullsoft Scriptable
Install System" (NSIS). If NSIS is found in the path or this option is
supplied a self contained executable installer for LibreOffice will
be created.])
[
Usage: --with-nsis-path=<abs. path to nsis.exe>
],
,)
AC_ARG_WITH(frame-home,
AS_HELP_STRING([--with-frame-home],
[For Microsoft compiler users, please supply the path pointing to
lib/mscoree.lib, usually something like:
"/cygdrive/c/Program Files/Windows SDKs/Windows/v7.0"])
[
Note that in most cases it will be automatically
found, though.
Usage: --with-frame-home=<absolute path to .NET
Framework>
],
,)
AC_ARG_WITH(psdk-home,
AS_HELP_STRING([--with-psdk-home],
[For Windows users, please supply the path to the Windnows SDK.
Usually found automatically.])
[
Usage: --with-psdk-home=<abs. path to Windows SDK>
],
,)
AC_ARG_WITH(directx-home,
AS_HELP_STRING([--with-directx-home],
[For Windows users, please supply the path to the Microsoft DirectX SDK.])
[
Usage: --with-directx-home=<absolute path to
Microsoft DirectX SDK>
],
,)
AC_ARG_WITH(mozilla-build,
AS_HELP_STRING([--with-mozilla-build],
[For Windows users, please supply the path to the mozilla build tools.])
[
Usage: --with-mozilla-build=<absolute path to
mozilla build tools>
At the moment of this writing, an installer for the
mozilla build tools can be obtained from http://ftp.
mozilla.org/pub/mozilla.org/mozilla/libraries/win32.
],
MOZILLABUILD=$withval ,
)
AC_ARG_WITH(local-solenv,
AS_HELP_STRING([--with-local-solenv],
[If you have solenv in a location other than ./solenv, please supply the path here.])
[
Usage: --with-local-solenv=<abs. path to solenv>
],
,)
AC_ARG_WITH(local-solver,
AS_HELP_STRING([--with-local-solver],
[If you have solver in a location other than ./solver, please supply the path here.])
[
Usage: --with-local-solver=<abs. path to solver>
],
,)
AC_ARG_WITH(lang,
AS_HELP_STRING([--with-lang],
[Use this option to build LibreOffice with additional language support.
English (US) is always included by default.
Separate multiple languages with space.
For all languages, use --with-lang=ALL.])
[
Usage: --with-lang="es sw tu cs sk"
],
,)
AC_ARG_WITH(poor-help-localizations,
AS_HELP_STRING([--with-poor-help-localizations],
[Use this option to specify which languages have unusable help localizations.
Separate multiple languages with space.])
[
Usage: --with-poor-help-localizations="af be-BY"
],
,)
AC_ARG_WITH(dict,
AS_HELP_STRING([--with-dict],
[Use this option to build LibreOffice with dictionary support.
ALL dictionaries are always included by default unless overridden with this option.
Separate multiple dictionaries with commas.
For all dictionaries, use --with-dict=ALL.])
[
Usage: --with-dict=ENGB,ENUS,ITIT
],
,)
AC_ARG_WITH(intro-bitmaps,
AS_HELP_STRING([--with-intro-bitmaps],
[Prefer the specified intro bitmaps over the the default one.
Can be more than one (separated by commas), the order means priority of
fallback if the first does not exist (in the installed tree).])
[
Usage: --with-intro-bitmaps=/path/my_lo_intro.bmp
],
,)
AC_ARG_WITH(about-bitmaps,
AS_HELP_STRING([--with-about-bitmaps],
[Similarly to --with-intro-bitmaps, this allows specification of bitmaps for the About
box.])
[
Usage: --with-about-bitmaps=/path/my_lo_about.bmp
],
,)
AC_ARG_WITH(vendor,
AS_HELP_STRING([--with-vendor],
[Set vendor of the build.])
[
Usage: --with-vendor="John the Builder"
],
,)
AC_ARG_WITH(unix-wrapper,
AS_HELP_STRING([--with-unix-wrapper],
[Redefines the name of the UNIX wrapper that will be used in the desktop
files and in the desktop-integration RPMs.])
[
Usage: --with-unix-wrapper=ooffice
],
,)
AC_ARG_WITH(asm-home,
AS_HELP_STRING([--with-asm-home],
[For Windows users, please supply the path for the ml.exe assembler.])
[
Usage: --with-asm-home=<path to ml.exe directory>
],
,)
AC_ARG_WITH(os-version,
AS_HELP_STRING([--with-os-version],
[For FreeBSD users, use this option option to override the detected OSVERSION.])
[
Usage: --with-os-version=<OSVERSION>
],
,)
AC_ARG_WITH(zip-home,
AS_HELP_STRING([--with-zip-home],
[If you use a non standard zip, for example windows please supply the path for zip.])
[
Usage: --with-zip-home=<path to zip executable>
],
,)
AC_ARG_WITH(mingwin,
AS_HELP_STRING([--with-mingwin],
[For Windows users, use the mingwin32 compiler within cygwin environment.])
[
Usage: --with-mingwin=yes
For !Windows use, use the mingw32 C++ compiler to
(re-)build unowinreg.dll. Specify the MinGW C++
Compilers name.
Usage: --with-mingwin=i586-mingw32msvc-g++
],
WITH_MINGWIN=$withval ,
WITH_MINGWIN=0)
AC_ARG_WITH(build-version,
AS_HELP_STRING([--with-build-version],
[Allows the builder to add a custom version tag that will appear in the
Help/About box for QA purposes.])
[
Usage: --with-build-version="Built by Jim"
],
with_build_version=$withval ,
)
AC_ARG_WITH(alloc,
AS_HELP_STRING([--with-alloc],
[Define which allocator to build with (choices are oo, system, tcmalloc, jemalloc).
Note that on FreeBSD/NetBSD system==jemalloc]),
,)
AC_ARG_WITH(sun-templates,
AS_HELP_STRING([--with-sun-templates],
[Integrate Sun template packages.]),
,)
AC_ARG_WITH(num-cpus,
AS_HELP_STRING([--with-num-cpus],
[Number of build processes/cpus to use (number of projects that will build at the same
time).
Multi-process/multi-cpu builds can save a lot of time on multi-cpu machines.
Defaults to the number of CPUs on the machine.]),
,)
AC_ARG_WITH(max-jobs,
AS_HELP_STRING([--with-max-jobs],
[Maximum number of jobs per one CPU that will be issued at the same time my dmake.
The real number of the jobs is affected by the --with-num-cpus too, it can get up to
CPUS*max_jobs.
Defaults to 1, unless you configure --enable-icecream - then to 10.]),
,)
dnl ---------- Deprecated since 2010-11-05 ----------
AC_ARG_WITH(barcode,
AS_HELP_STRING([--with-barcode],
[Deprecated: use --enable-ext-barcode instead.]),
if test -z "$enable_ext_barcode"; then
enable_ext_barcode=$with_barcode;
fi ,
)
AC_ARG_WITH(diagram,
AS_HELP_STRING([--with-diagram],
[Deprecated: use --enable-ext-diagram instead.]),
if test -z "$enable_ext_diagram"; then
enable_ext_diagram=$with_diagram;
fi ,
)
AC_ARG_WITH(google-docs,
AS_HELP_STRING([--with-google-docs],
[Deprecated: use --enable-ext-google-docs instead.]),
if test -z "$enable_ext_google_docs"; then
enable_ext_google_docs=$with_google_docs;
fi ,
)
AC_ARG_WITH(hunart,
AS_HELP_STRING([--with-hunart],
[Deprecated: use --enable-ext-hunart instead.]),
if test -z "$enable_ext_hunart"; then
enable_ext_hunart=$with_hunart;
fi ,
)
AC_ARG_WITH(lightproof,
AS_HELP_STRING([--with-lightproof],
[Deprecated: use --enable-ext-lightproof instead.]),
if test -z "$enable_ext_lightproof"; then
enable_ext_lightproof=$with_lightproof;
fi ,
)
AC_ARG_WITH(nlpsolver,
AS_HELP_STRING([--with-nlpsolver],
[Deprecated: use --enable-ext-nlpsolver instead.]),
if test -z "$enable_ext_nlpsolver"; then
enable_ext_nlpsolver=$with_nlpsolver;
fi ,
)
AC_ARG_WITH(numbertext,
AS_HELP_STRING([--with-numbertext],
[Deprecated: use --enable-ext-numbertext instead.]),
if test -z "$enable_ext_numbertext"; then
enable_ext_numbertext=$with_numbertext;
fi ,
)
AC_ARG_WITH(oooblogger,
AS_HELP_STRING([--with-oooblogger],
[Deprecated: use --enable-ext-oooblogger instead.]),
if test -z "$enable_ext_oooblogger"; then
enable_ext_oooblogger=$with_oooblogger;
fi ,
)
AC_ARG_WITH(typo,
AS_HELP_STRING([--with-typo],
[Deprecated: use --enable-ext-typo instead.]),
if test -z "$enable_ext_typo"; then
enable_ext_typo=$with_typo;
fi ,
)
AC_ARG_WITH(validator,
AS_HELP_STRING([--with-validator],
[Deprecated: use --enable-ext-validator instead.]),
if test -z "$enable_ext_validator"; then
enable_ext_validator=$with_validator;
fi ,
)
AC_ARG_WITH(watch-window,
AS_HELP_STRING([--with-watch-window],
[Deprecated: use --enable-ext-watch-window instead.]),
if test -z "$enable_ext_watch_window"; then
enable_ext_watch_window=$with_watch_window;
fi ,
)
BUILD_TYPE="LibO"
dnl ===================================================================
dnl Message.
dnl ===================================================================
echo "********************************************************************"
echo "*"
echo "* Running ${PACKAGE_NAME} build configuration."
echo "*"
echo "********************************************************************"
echo ""
dnl ===================================================================
dnl Configure pre-requisites.
dnl ===================================================================
cat /dev/null > warn
if test "$EUID" -eq "0" -a "z`uname -o 2>/dev/null`" = "zCygwin" ; then
AC_MSG_ERROR([You must build LibreOffice as a normal user - not using an administrative account])
fi
AC_PROG_EGREP
AC_PROG_AWK
AC_PATH_PROG( AWK, $AWK)
if test -z "$AWK"; then
AC_MSG_ERROR([install awk to run this script])
fi
AC_PATH_PROGS(SED, sed )
if test -z "$SED"; then
AC_MSG_ERROR([install sed to run this script])
fi
AC_MSG_CHECKING([for solenv environment])
if test -z "$with_local_solenv"; then
LOCAL_SOLENV="DEFAULT"
AC_MSG_RESULT([default])
else
LOCAL_SOLENV=$with_local_solenv
AC_MSG_RESULT([$with_local_solenv])
fi
AC_SUBST(LOCAL_SOLENV)
if test "$LOCAL_SOLENV" = "DEFAULT"; then
_solenv="./solenv"
else
_solenv="$LOCAL_SOLENV"
fi
AC_SUBST(_solenv)
if test -e $_solenv/inc/minor.mk; then
# Get UPD number from ./solenv/inc/minor.mk
UPD="`grep RSCVERSION= $_solenv/inc/minor.mk | $AWK -F"=" '{ print $2 }'`"
AC_SUBST(UPD)
SOURCEVERSION="`grep SOURCEVERSION= $_solenv/inc/minor.mk | $AWK -F"=" '{ print $2 }'`"
AC_SUBST(SOURCEVERSION)
else
AC_MSG_ERROR([$_solenv/inc/minor.mk missing but needed for architecture/os detecion and proper
environment script generation...])
fi
dnl ===================================================================
dnl Checks for the operating system and processor.
dnl ===================================================================
AC_CANONICAL_SYSTEM
if test "$build" != "$host" -o "$build" != "$target" \
-o "$host" != "$target"; then
AC_MSG_WARN([cross-compiling by any means is not supported (yet)!])
echo "cross-compiling by any means is not supported (yet)!" >> warn
fi
if echo "$build_os" | grep cygwin; then
AC_MSG_CHECKING([Cygwin version])
CygwinVer=`uname -r`
AC_MSG_RESULT([$CygwinVer])
if test "`echo $CygwinVer | $AWK -F . '{ print $1$2 }'`" -lt "15"; then
AC_MSG_ERROR([You need at least Cygwin V1.5.x])
fi
else
CygwinVer="false"
fi
dnl ===================================================================
dnl The following is a list of supported systems.
dnl Sequential to keep the logic very simple
dnl These values may be checked and reset later.
dnl ===================================================================
#defaults unless the os test overrides this:
test_cairo=yes
test_randr=yes
case "$build_os" in
solaris*)
test_gtk=yes
build_gstreamer=yes
test_kde=yes
test_cups=yes
test_freetype=yes
_os=SunOS
AC_PATH_PROG( GNUTAR, gtar,,$PATH:/usr/sfw/bin)
if test -z "$GNUTAR"; then
AC_MSG_ERROR([gtar (gnu tar) not found but needed. Install it (SUN Freeware package).])
fi
AC_SUBST(GNUTAR)
dnl ===========================================================
dnl check whether we're using solaris 6,7,8 - sparc or intel.
dnl ===========================================================
AC_MSG_CHECKING([the Solaris operating system release])
_os_release=`echo $build_os | $SED -e s/solaris2\.//`
if test "$_os_release" -lt "6"; then
AC_MSG_ERROR([use solaris >= 6 to build LibreOffice])
else
AC_MSG_RESULT([ok ($_os_release)])
fi
dnl check whether we're using a sparc or i386 processor
AC_MSG_CHECKING([the processor type])
if test "$build_cpu" = "sparc" -o "$build_cpu" = "i386"; then
AC_MSG_RESULT([ok ($build_cpu)])
else
AC_MSG_ERROR([only sparc and i386 processors are supported])
fi
;;
linux-gnu*|k*bsd*-gnu*)
test_gtk=yes
build_gstreamer=yes
test_kde=yes
test_kde4=yes
test_cups=yes
test_freetype=yes
test_unix_quickstarter=yes
_os=Linux
;;
gnu)
test_randr=no
test_cairo=no
test_cups=no
_os=GNU
;;
cygwin*) # Windows
test_cups=no
test_randr=no
test_freetype=no
_os=WINNT
;;
darwin*) # Mac OS X
test_cups=yes
test_gtk=yes
test_randr=no
test_freetype=no
test_cairo=no
_os=Darwin
if test "$enable_systray" = "yes" && test "$enable_gtk" != "no"; then
AC_MSG_WARN([Disabling gtk-quickstarter - not supported on Mac. Use --disable-systray])
echo "Disabling gtk-quickstarter - not supported on Mac. Use --disable-systray" >>warn
enable_systray=no
fi
;;
os2*)
test_cups=no
test_randr=no
test_gtk=no
test_cairo=no
test_freetype=no
_os=OS2
;;
freebsd*)
test_gtk=yes
build_gstreamer=yes
test_kde=yes
test_kde4=yes
test_cups=yes
test_freetype=yes
AC_MSG_CHECKING([the FreeBSD operating system release])
if test -n "$with_os_version"; then
OSVERSION="$with_os_version"
else
OSVERSION=`/sbin/sysctl -n kern.osreldate`
fi
AC_MSG_RESULT([found OSVERSION=$OSVERSION])
AC_MSG_CHECKING([which thread library to use])
if test "$OSVERSION" -lt "500016"; then
PTHREAD_CFLAGS="-D_THREAD_SAFE"
PTHREAD_LIBS="-pthread"
elif test "$OSVERSION" -lt "502102"; then
PTHREAD_CFLAGS="-D_THREAD_SAFE"
PTHREAD_LIBS="-lc_r"
else
PTHREAD_CFLAGS=""
PTHREAD_LIBS="-pthread"
fi
AC_MSG_RESULT([$PTHREAD_LIBS])
_os=FreeBSD
;;
osf)
test_cups=no
test_cairo=no
test_randr=no
_os=OSF1
;;
*netbsd*)
test_gtk=yes
build_gstreamer=yes
test_kde=yes
test_kde4=yes
test_cups=yes
test_freetype=yes
PTHREAD_CFLAGS="-pthread"
PTHREAD_LIBS="-pthread -lpthread"
_os=NetBSD
;;
aix*)
test_cups=no
test_randr=no
test_cairo=no
test_freetype=yes
PTHREAD_LIBS=-pthread
_os=AIX
;;
openbsd*)
test_gtk=yes
test_kde=yes
test_cups=yes
test_freetype=yes
PTHREAD_CFLAGS="-pthread -D_THREAD_SAFE"
PTHREAD_LIBS="-pthread"
_os=OpenBSD
;;
*)
AC_MSG_ERROR([$_os operating system is not suitable to build LibreOffice!])
;;
esac
AC_SUBST(OSVERSION)
AC_SUBST(PTHREAD_CFLAGS)
AC_SUBST(PTHREAD_LIBS)
dnl ===================================================================
dnl Set the ENABLE_CRASHDUMP variable.
dnl ===================================================================
AC_MSG_CHECKING([whether to enable crashdump feature])
if test "$enable_crashdump" = "yes"; then
ENABLE_CRASHDUMP="TRUE"
BUILD_TYPE="$BUILD_TYPE CRASHREP"
AC_MSG_RESULT([yes])
else
ENABLE_CRASHDUMP=""
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_CRASHDUMP)
if test "$_os" = "WINNT"; then
BUILD_TYPE="$BUILD_TYPE TWAIN"
fi
if test "$_os" = "WINNT"; then
dnl ===================================================================
dnl Set the CL_X64 variable.
dnl ===================================================================
AC_MSG_CHECKING([whether to use the Microsoft C/C++ x64 compiler])
if test "$enable_cl_x64" = "" -o "$enable_cl_x64" = "no"; then
CL_X64=""
AC_MSG_RESULT([no])
else
CL_X64="TRUE"
AC_MSG_RESULT([yes])
fi
AC_SUBST(CL_X64)
fi
dnl ===================================================================
dnl Set the ENABLE_WERROR variable. (Activate --enable-werror)
dnl ===================================================================
AC_MSG_CHECKING([whether to turn warnings to errors])
if test -n "$enable_werror" && test "$enable_werror" != "no"; then
ENABLE_WERROR="TRUE"
AC_MSG_RESULT([yes])
AC_MSG_WARN([Turning warnings to errors has no effect in modules or])
AC_MSG_WARN([on platforms where it has been disabled explicitely])
echo "Turning warnings to errors has no effect in modules or on platforms where it has been
disabled explicitely" >> warn
else
ENABLE_WERROR="FALSE"
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_WERROR)
dnl ===================================================================
dnl Set the ENABLE_DEBUG variable. (Activate --enable-symbols)
dnl ===================================================================
AC_MSG_CHECKING([whether to do a debug build])
if test -n "$enable_debug" && test "$enable_debug" != "no"; then
ENABLE_DEBUG="TRUE"
if test -z "$enable_symbols"; then
enable_symbols="yes"
fi
AC_MSG_RESULT([yes])
else
ENABLE_DEBUG="FALSE"
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_DEBUG)
dnl ===================================================================
dnl Set the ENABLE_DBGUTIL variable
dnl ===================================================================
AC_MSG_CHECKING([whether to build with additional debug utilities])
if test -n "$enable_dbgutil" && test "$enable_dbgutil" != "no"; then
PROEXT=""
PRODUCT=""
PROFULLSWITCH=""
AC_MSG_RESULT([yes])
else
PRODUCT="full"
PROFULLSWITCH="product=full"
PROEXT=".pro"
AC_MSG_RESULT([no, full product build])
fi
AC_SUBST(PRODUCT)
AC_SUBST(PROFULLSWITCH)
AC_SUBST(PROEXT)
dnl ===================================================================
dnl First setting is whether to include symbols into final build.
dnl ===================================================================
AC_MSG_CHECKING([whether to include symbols into final build])
if test -n "$enable_symbols" && test "$enable_symbols" != "no"; then
if test "$enable_symbols" = "yes" -o "$enable_symbols" = "TRUE"; then
ENABLE_SYMBOLS="TRUE"
AC_MSG_RESULT([yes])
else
if test "$enable_symbols" = "SMALL" -o "$enable_symbols" = "small"; then
ENABLE_SYMBOLS="SMALL"
AC_MSG_RESULT([yes, small ones])
else if test "$enable_symbols" != "no" ; then
echo enable symbols is: $enable_symbols
AC_MSG_ERROR([--enable-symbols only accepts yes, TRUE or SMALL as parameter.])
else
ENABLE_SYMBOLS=
fi
fi
fi
else
ENABLE_SYMBOLS=
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_SYMBOLS)
dnl ===================================================================
dnl Determine if the solver is to be stripped or not.
dnl ===================================================================
AC_MSG_CHECKING([whether to strip the solver or not.])
if test -n "$enable_strip_solver"; then
if test "$enable_strip_solver" = "yes"; then
DISABLE_STRIP=
else if test "$enable_strip_solver" = "no"; then
DISABLE_STRIP="TRUE"
else
AC_MSG_ERROR([--disable-strip-solver only accepts yes or no as parameter.])
fi
fi
else
if test -n "$ENABLE_SYMBOLS"; then
DISABLE_STRIP="TRUE"
else
DISABLE_STRIP=
fi
fi
AC_SUBST(DISABLE_STRIP)
dnl ===================================================================
dnl Build options
dnl ===================================================================
AC_MSG_CHECKING([whether to enable native CUPS support])
if test "$test_cups" = "yes" -a \( "$enable_cups" = "yes" -o "$enable_cups" = "TRUE" \) ; then
ENABLE_CUPS="TRUE"
AC_MSG_RESULT([yes])
else
ENABLE_CUPS=""
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_CUPS)
AC_MSG_CHECKING([whether to enable fontconfig support])
if test "$_os" != "WINNT" -a "$_os" != "Darwin" -a \( "$enable_fontconfig" = "yes" -o
"$enable_fontconfig" = "TRUE" \); then
ENABLE_FONTCONFIG="TRUE"
AC_MSG_RESULT([yes])
else
ENABLE_FONTCONFIG=""
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_FONTCONFIG)
dnl ===================================================================
dnl find external tarballs.
dnl ===================================================================
if test -z "$TARFILE_LOCATION"; then
TARFILE_LOCATION="DEFAULT"
fi
AC_SUBST(TARFILE_LOCATION)
if test -z "$enable_fetch_external" || test "$enable_fetch_external" = "yes" \
&& test -z "$with_system_libs" -a "$with_system_jars" != "no"; then
DO_FETCH_TARBALLS="yes"
fi
AC_SUBST(DO_FETCH_TARBALLS)
dnl ===================================================================
dnl git-new-workdir
dnl ===================================================================
AC_SUBST(GIT_LINK_SRC)
dnl ===================================================================
dnl Disable legacy binary file formats filters
dnl ===================================================================
AC_MSG_CHECKING([whether to enable filters for legacy binary file formats (StarOffice 5.2)])
if test "$enable_binfilter" = "no"; then
WITH_BINFILTER="NO"
AC_MSG_RESULT([no])
else
WITH_BINFILTER="YES"
BUILD_TYPE="$BUILD_TYPE BINFILTER"
AC_MSG_RESULT([yes])
fi
AC_SUBST(WITH_BINFILTER)
if test "$_os" = "WINNT"; then
AC_MSG_CHECKING([whether to use DirectX])
if test "$enable_directx" = "yes" -o "$enable_directx" = "TRUE" -o "$enable_directx" = ""; then
ENABLE_DIRECTX="TRUE"
AC_MSG_RESULT([yes])
else
ENABLE_DIRECTX=""
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_DIRECTX)
AC_MSG_CHECKING([whether to use ActiveX])
if test "$enable_activex" = "yes" -o "$enable_activex" = "TRUE" -o "$enable_activex" = ""; then
DISABLE_ACTIVEX=""
AC_MSG_RESULT([yes])
else
DISABLE_ACTIVEX="TRUE"
AC_MSG_RESULT([no])
fi
AC_SUBST(DISABLE_ACTIVEX)
AC_MSG_CHECKING([whether to use ATL])
if test "$enable_atl" = "yes" -o "$enable_atl" = "TRUE" -o "$enable_atl" = ""; then
DISABLE_ATL=""
AC_MSG_RESULT([yes])
else
DISABLE_ATL="TRUE"
AC_MSG_RESULT([no])
fi
AC_SUBST(DISABLE_ATL)
fi
dnl ===================================================================
dnl Disable rpath in shared libraries?
dnl ===================================================================
AC_MSG_CHECKING([whether to use RPATH in shared libraries])
if test "$enable_rpath" = "no"; then
ENABLE_RPATH="no"
else
ENABLE_RPATH="yes"
fi
AC_MSG_RESULT([$ENABLE_RPATH])
AC_SUBST(ENABLE_RPATH)
dnl Test whether to include MySpell dictionaries
dnl ===================================================================
AC_MSG_CHECKING([whether to include MySpell dictionaries])
if test -z "$with_myspell_dicts" || test "$with_myspell_dicts" = "yes"; then
AC_MSG_RESULT([yes])
WITH_MYSPELL_DICTS=YES
BUILD_TYPE="$BUILD_TYPE DICTIONARIES"
else
AC_MSG_RESULT([no])
WITH_MYSPELL_DICTS=NO
fi
AC_SUBST(WITH_MYSPELL_DICTS)
if test "$WITH_MYSPELL_DICTS" = "NO"; then
AC_MSG_CHECKING([whether to use dicts from external paths])
if test -n "$with_system_dicts" -a "$with_system_dicts" = "yes"; then
AC_MSG_RESULT([yes])
SYSTEM_DICTS=YES
AC_MSG_CHECKING([for spelling dictionary directory])
if test -n "$with_external_dict_dir"; then
DICT_SYSTEM_DIR=file://$with_external_dict_dir
else
DICT_SYSTEM_DIR=file:///usr/share/hunspell
fi
AC_MSG_RESULT([$DICT_SYSTEM_DIR])
AC_MSG_CHECKING([for hyphenation patterns directory])
if test -n "$with_external_hyph_dir"; then
HYPH_SYSTEM_DIR=file://$with_external_hyph_dir
else
HYPH_SYSTEM_DIR=file:///usr/share/hyphen
fi
AC_MSG_RESULT([$HYPH_SYSTEM_DIR])
AC_MSG_CHECKING([for thesaurus directory])
if test -n "$with_external_thes_dir"; then
THES_SYSTEM_DIR=file://$with_external_thes_dir
else
THES_SYSTEM_DIR=file:///usr/share/mythes
fi
AC_MSG_RESULT([$THES_SYSTEM_DIR])
else
AC_MSG_RESULT([no])
SYSTEM_DICTS=NO
fi
fi
AC_SUBST(SYSTEM_DICTS)
AC_SUBST(DICT_SYSTEM_DIR)
AC_SUBST(HYPH_SYSTEM_DIR)
AC_SUBST(THES_SYSTEM_DIR)
if test $_os = "WINNT"; then
AC_MSG_CHECKING([Windows build environment sanity])
dnl ===================================================================
dnl Sanity check! Native windows programs cannot use cygwin symlinks!
dnl ===================================================================
dnl As long as awk instead of $AWK is used somewhere in the sources,
dnl check for $AWK and awk. $AWK is pointing to gawk in cygwin.
if test -L $AWK -o -L `which awk` -o -L `which tar` -o -L `which gunzip` ; then
AC_MSG_ERROR([$AWK, awk, tar or gunzip is a cygwin symlink!
Native windows programs cannot use cygwin symlinks. Remove the symbolic
link, and copy the program to the name of the link.])
fi
dnl ===================================================================
dnl Another sanity check! More a band-aid. winenv.* adds guw.exe to
dnl CC and CXX but the configure checks here assume that guw.exe
dnl (if needed at all) is not yet present.
dnl ===================================================================
CC=`echo $CC | $SED "s/^guw.exe //"`
CXX=`echo $CXX | $SED "s/^guw.exe //"`
dnl ===================================================================
dnl If $CC is set to a MinGW compiler, e.g. "gcc -mno-cygwin" enable
dnl $WITH_MINGWIN
dnl ===================================================================
if test -n "$CC";then
if test "`$CC -dumpmachine 2>/dev/null | $SED -e 's/^.*-//'`" = "mingw32"; then
WITH_MINGWIN="yes"
fi
fi
dnl ===================================================================
if test "$WITH_MINGWIN" = "yes" ; then
if test -z "$CC"; then
CC="gcc -mno-cygwin"
CXX="g++ -mno-cygwin"
fi
fi
AC_MSG_RESULT([ok])
fi
AC_SUBST(WITH_MINGWIN)
dnl ===================================================================
dnl Extra check for Windows. cygwin builds need gcc to build dmake
dnl and g++ to build guw.exe although MS cl (or MinGW) is used to
dnl build LibO.
dnl ===================================================================
if test "$_os" = "WINNT" ; then
AC_MSG_CHECKING([for cygwin gcc/g++])
if which gcc > /dev/null && which g++ > /dev/null ; then
AC_MSG_RESULT([found])
else
AC_MSG_ERROR([cygwin gcc and g++ are needed, please install them.])
fi
fi
dnl ===================================================================
dnl Check whether the bash shell can be used.
dnl ===================================================================
AC_PATH_PROG(SHELLPATH, bash)
if test -z "$SHELLPATH"; then
AC_MSG_ERROR([bash not found in \$PATH])
else
SHELLPATH=`echo $SHELLPATH | $SED -n "s/\/bash$//p"`
fi
AC_SUBST(SHELLPATH)
dnl ===================================================================
dnl Checks for c compiler,
dnl The check for the c++ compiler is later on.
dnl ===================================================================
GCC_HOME_SET="true"
AC_MSG_CHECKING([gcc home])
if test -z "$with_gcc_home"; then
if test -n "$enable_icecream" && test "$enable_icecream" != "no" ; then
GCC_HOME="/opt/icecream"
else
GCC_HOME=`which gcc | $SED -e s,/bin/gcc,,`
GCC_HOME_SET="false"
fi
else
GCC_HOME="$with_gcc_home"
fi
AC_MSG_RESULT($GCC_HOME)
AC_SUBST(GCC_HOME)
save_CC=$CC
save_CXX=$CXX
if test "$GCC_HOME_SET" = "true" ; then
if test -z "$CC"; then
CC="$GCC_HOME/bin/gcc"
fi
if test -z "$CXX"; then
CXX="$GCC_HOME/bin/g++"
fi
fi
dnl The following checks for gcc, cc and then cl (if it weren't guarded for win32)
if test "$_os" != "WINNT" -o "$WITH_MINGWIN" = "yes"; then
AC_PROG_CC
fi
COMPATH=`dirname "$CC"`
if test "$COMPATH" = "." ; then
AC_PATH_PROGS(COMPATH, $CC)
dnl double square bracket to get single because of M4 quote...
COMPATH=`echo $COMPATH | $SED "s@/[[^/:]]*\\\$@@"`;
fi
COMPATH=`echo $COMPATH | $SED "s@/[[Bb]][[Ii]][[Nn]]\\\$@@"`;
dnl ===================================================================
dnl Test the gcc version, 3 is OK
dnl ===================================================================
GCCVER=20995
if test \( "$_os" != "WINNT" -o "$WITH_MINGWIN" = "yes" \) -a "$GCC" = "yes"; then
AC_MSG_CHECKING([the GNU gcc compiler version])
_gcc_version=`$CC -dumpversion`
_gcc_major=`echo $_gcc_version | $AWK -F. '{ print \$1 }'`
GCCVER=`echo $_gcc_version | $AWK -F. '{ print \$1*10000+\$2*100+\$3 }'`
if test "$_gcc_major" -lt "3"; then
AC_MSG_ERROR([found version "$_gcc_version", use version 3+ of the gcc compiler])
else
if test "$GCCVER" -eq "030203"; then
if test "$ENABLE_SYMBOLS" = "SMALL"; then
AC_MSG_ERROR([version "$_gcc_version" gives internal error with small.])
fi
fi
fi
if test "$_os" = "Darwin" -a "$GCCVER" -ge "040100" ; then
if test -z "$save_CC" -a -x "$GCC_HOME/bin/gcc-4.0" ; then
CC=$GCC_HOME/bin/gcc-4.0
GCCVER2=`"$CC" -dumpversion | $AWK -F. '{ print \$1*10000+\$2*100+\$3 }'`
if test "$GCCVER2" -ge "040000" -a "$GCCVER2" -lt "040100" ; then
GCCVER=$GCCVER2
fi
fi
if test "$GCCVER" -ge "040100" ; then
AC_MSG_ERROR([You need to use the gcc-4.0 compiler (gcc $_gcc_version won't work with the
MacOSX10.4u.sdk) - set CC accordingly])
else
AC_MSG_RESULT([implicitly using CC=$CC])
fi
else
AC_MSG_RESULT([checked (gcc $_gcc_version)])
fi
if test "$_os" = "SunOS"; then
AC_MSG_CHECKING([gcc linker])
if $CC -Wl,--version 2>&1 |head -n 1| grep -v GNU > /dev/null;then
AC_MSG_ERROR([failed (not GNU ld). Use GNU ld instead of Sun ld on Solaris])
fi
AC_MSG_RESULT([ok (GNU ld)])
fi
fi
AC_SUBST(GCCVER)
HAVE_LD_BSYMBOLIC_FUNCTIONS=
if test "$GCC" = "yes"; then
AC_MSG_CHECKING( for -Bsymbolic-functions linker support )
bsymbolic_functions_ldflags_save=$LDFLAGS
LDFLAGS="$LDFLAGS -Wl,-Bsymbolic-functions -Wl,--dynamic-list-cpp-new
-Wl,--dynamic-list-cpp-typeinfo"
AC_LINK_IFELSE([AC_LANG_PROGRAM([
#include <stdio.h>
],[
printf ("hello world\n");
])], HAVE_LD_BSYMBOLIC_FUNCTIONS=TRUE, [])
if test "z$HAVE_LD_BSYMBOLIC_FUNCTIONS" = "zTRUE"; then
AC_MSG_RESULT( found )
else
AC_MSG_RESULT( not found )
fi
LDFLAGS=$bsymbolic_functions_ldflags_save
fi
AC_SUBST(HAVE_LD_BSYMBOLIC_FUNCTIONS)
dnl ===================================================================
dnl Set the ENABLE_PCH variable. (Activate --enable-pch)
dnl ===================================================================
AC_MSG_CHECKING([whether to enable pch feature])
if test -n "$enable_pch" && test "$enable_pch" != "no"; then
if test "$_os" = "WINNT" -a "$WITH_MINGWIN" != "yes"; then
ENABLE_PCH="TRUE"
AC_MSG_RESULT([yes])
dnl There is no PCH support in GCC versions prior to this
elif test "$GCC" = "yes" -a "$GCCVER" -gt "030400"; then
ENABLE_PCH="TRUE"
AC_MSG_RESULT([yes])
else
ENABLE_PCH=""
AC_MSG_WARN([Precompiled header not yet supported for your platform/compiler])
fi
else
ENABLE_PCH=""
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_PCH)
dnl ===================================================================
dnl Set the NO_HIDS variable. (enable with --enable-hids)
dnl ===================================================================
AC_MSG_CHECKING([whether to enable hid list feature])
if test -n "$enable_hids" && test "$enable_hids" != "no"; then
NO_HIDS=""
AC_MSG_RESULT([yes])
else
NO_HIDS="TRUE"
AC_MSG_RESULT([no])
fi
AC_SUBST(NO_HIDS)
dnl ===================================================================
dnl Search all the common names for GNU make
dnl ===================================================================
AC_MSG_CHECKING([for GNU make])
for a in "$MAKE" $GNUMAKE make gmake gnumake; do
$a --version 2> /dev/null | grep GNU 2>&1 > /dev/null
if test $? -eq 0; then
GNUMAKE=$a
break
fi
done
AC_MSG_RESULT($GNUMAKE)
if test -z "$GNUMAKE"; then
AC_MSG_ERROR([not found. install GNU make.])
fi
AC_MSG_CHECKING([the GNU make version])
_make_version=`$GNUMAKE --version | grep GNU | $SED -e 's@^[[^0-9]]*@@' -e 's@ .*@@' -e 's@,.*@@'`;
_make_longver=`echo $_make_version | $AWK -F. '{ print \$1*10000+\$2*100+\$3 }'`
if test "$_make_longver" -ge "037901" ; then
AC_MSG_RESULT([$GNUMAKE $_make_version])
else
if test "$_os" = "Darwin"; then
if test "$_make_longver" -ge "037900" ; then
AC_MSG_RESULT([$GNUMAKE $_make_version])
else
AC_MSG_WARN([failed ($GNUMAKE $_make_version need 3.79.0+)])
fi
else
AC_MSG_ERROR([failed ($GNUMAKE $_make_version need 3.79.1+)])
fi
fi
AC_SUBST(GNUMAKE)
dnl ===================================================================
dnl Search all the common names for GNU tar
dnl ===================================================================
AC_MSG_CHECKING([for GNU tar])
for a in $GNUTAR gtar gnutar tar; do
$a --version 2> /dev/null | grep GNU 2>&1 > /dev/null
if test $? -eq 0; then
GNUTAR=$a
break
fi
done
AC_MSG_RESULT($GNUTAR)
if test -z "$GNUTAR"; then
AC_MSG_ERROR([not found. install GNU tar.])
fi
AC_SUBST(GNUTAR)
dnl ===================================================================
dnl Test the solaris compiler version
dnl ===================================================================
if test "$_os" = "SunOS"; then
if test "$CC" = "cc"; then
AC_PATH_PROGS(_cc, cc)
COMPATH=`echo $_cc | $SED -n "s/\/bin\/cc//p"`
AC_MSG_CHECKING([the SunStudio C/C++ compiler version])
dnl cc -V outputs to standard error!!!!
_sunstudio_string=`$CC -V 2>&1 | grep '^cc' | $SED -e 's/.* C //'`
_sunstudio_version=`echo $_sunstudio_string | $AWK '{ print $1 }'`
_sunstudio_major=`echo $_sunstudio_version | $AWK -F. '{ print $1 }'`
if test "$_sunstudio_major" != "5"; then
AC_MSG_ERROR([found version "$_sunstudio_version", use version 5.5, 5.7, 5.8 or 5.9 of the
SunStudio C/C++ compiler])
else
_sunstudio_minor=`echo $_sunstudio_version | $AWK -F. '{ if ($2 == 5) print "true"; else
if ($2 == 7) print "true"; else if ($2 == 8) print "true"; else if ($2 == 9) print "true"; else
print "false" }'`
if test "$_sunstudio_minor" = "false"; then
AC_MSG_ERROR([found version "$_sunstudio_version", use version 5.5, 5.7, 5.8 or 5.9 of
the SunStudio C/C++ compiler])
else
dnl compiler will do
AC_MSG_RESULT([checked])
fi
fi
fi
fi
if test "$GCC" = "yes"; then
AC_MSG_CHECKING( for --hash-style=both linker support )
hash_style_ldflags_save=$LDFLAGS
LDFLAGS="$LDFLAGS -Wl,--hash-style=both"
AC_LINK_IFELSE([AC_LANG_PROGRAM([
#include <stdio.h>
],[
printf ("hello world\n");
])], HAVE_LD_HASH_STYLE=TRUE, HAVE_LD_HASH_STYLE=FALSE)
if test "z$HAVE_LD_HASH_STYLE" = "zTRUE"; then
AC_MSG_RESULT( found )
else
AC_MSG_RESULT( not found )
fi
LDFLAGS=$hash_style_ldflags_save
fi
AC_SUBST(HAVE_LD_HASH_STYLE)
dnl ===================================================================
dnl Test the Compaq compiler for OSF1
dnl ===================================================================
if test "$_os" = "OSF1"; then
if test "$CC" = "cc"; then
AC_PATH_PROGS(_cc, cc)
COMPATH=`echo $_cc | $SED -n "s/\/bin\/cc//p"`
AC_MSG_WARN([******* $_cc , $COMPATH])
AC_MSG_CHECKING([the Compaq C compiler version])
dnl cc -V outputs to standard error!!!!
_compaqc_version=`$CC -V 2>&1 | $AWK '{ print $3 }'`
_compaqc_major=`echo $_compaqc_version | $AWK -F. '{ print $1 }'`
if test "$_compaqc_major" != "T6"; then
AC_MSG_ERROR([found version "$_compaqc_version", use version 6 of the Compaq C compiler])
else
dnl compiler will do
AC_MSG_RESULT([checked])
fi
fi
fi
dnl ===================================================================
dnl Check whether there's a Perl version available.
dnl ===================================================================
if test -z "$with_perl_home"; then
AC_PATH_PROG(PERL, perl)
else
if test "$_os" = "WINNT"; then
with_perl_home=`cygpath -u "$with_perl_home"`
fi
_perl_path="$with_perl_home/bin/perl"
if test -x "$_perl_path"; then
PERL=$_perl_path
else
AC_MSG_ERROR([$_perl_path not found])
fi
fi
dnl ===================================================================
dnl Testing for Perl version 5 or greater.
dnl $] is the perl version variable, it is returned as an integer
dnl ===================================================================
if test "$PERL"; then
AC_MSG_CHECKING([the Perl version])
${PERL} -e "exit($]);"
_perl_version=$?
if test "$_perl_version" -lt 5; then
AC_MSG_ERROR([found Perl version "$_perl_version", use version 5 of Perl])
fi
AC_MSG_RESULT([checked (perl $_perl_version)])
else
AC_MSG_ERROR([Perl not found, install version 5 of Perl])
fi
AC_SUBST(PERL)
dnl ===================================================================
dnl Testing for required Perl modules
dnl ===================================================================
AC_MSG_CHECKING([for required Perl modules])
if `$PERL -e 'use Archive::Zip;'`; then
AC_MSG_RESULT([all modules found])
else
AC_MSG_ERROR([Failed to find some modules])
fi
dnl ===================================================================
dnl Check which Microsoft C/C++ or MinGW compiler is used for WINNT
dnl ===================================================================
if test "$_os" = "WINNT"; then
if test "$WITH_MINGWIN" != "yes"; then
AC_MSG_CHECKING([for a friendly Microsoft C/C++ compiler installation path])
if test -z "$with_cl_home"; then
vctest=`./oowintool --msvc-productdir`;
if test "$enable_cl_x64" = "" -o "$enable_cl_x64" = "no"; then
if test -x "$vctest/bin/cl.exe"; then
with_cl_home=$vctest;
fi
else
if test -x "$vctest/bin/x86_amd64/cl.exe"; then
with_cl_home=$vctest;
fi
fi
else
with_cl_home=`cygpath -u "$with_cl_home"`
fi
AC_MSG_RESULT([done])
dnl ===========================================================
dnl Check for mspdb80.dll/mspdb100.dll
dnl ===========================================================
dnl MSVS 2008/10 Compiler
if test -n "$with_mspdb_path";then
with_mspdb_path=`cygpath -u "$with_mspdb_path"`
fi
if test -e "$with_mspdb_path/mspdb80.dll" -o -e "$with_mspdb_path/mspdb100.dll"; then
MSPDB_PATH="$with_mspdb_path"
fi
dnl MSVS 2008 case
if test -z "$MSPDB_PATH" -a -e "$with_cl_home/../Common7/IDE/mspdb80.dll"; then
MSPDB_PATH="$with_cl_home/../Common7/IDE"
fi
dnl Windows SDK 6.0 case
if test -z "$MSPDB_PATH" -a -e "$with_cl_home/bin/mspdb80.dll"; then
MSPDB_PATH="$with_cl_home/bin"
fi
dnl MSVS 2010 case
if test -z "$MSPDB_PATH" -a -e "$with_cl_home/../Common7/IDE/mspdb100.dll"; then
MSPDB_PATH="$with_cl_home/../Common7/IDE"
fi
if test -z "$MSPDB_PATH";then
dnl AC_PATH_PROG only checks if MSPDB_PATH is still empty
AC_PATH_PROG(MSPDB_PATH, mspdb80.dll)
AC_PATH_PROG(MSPDB_PATH, mspdb100.dll)
MSPDB_PATH=`dirname "$MSPDB_PATH"`
fi
if test -z "$MSPDB_PATH"; then
AC_MSG_ERROR([You need a mspdb80.dllor mspdb100.dll, make sure it's in the path or use
--with-mspdb-path])
fi
MSPDB_PATH=`cygpath -d "$MSPDB_PATH"`
MSPDB_PATH=`cygpath -u "$MSPDB_PATH"`
dnl The path needs to be added before cl is called
PATH="$MSPDB_PATH:$PATH"
AC_MSG_CHECKING([the Microsoft C/C++ Compiler])
if test "$enable_cl_x64" = "" -o "$enable_cl_x64" = "no"; then
if test -x "$with_cl_home/bin/cl.exe"; then
CC="$with_cl_home/bin/cl.exe"
fi
else
if test -x "$with_cl_home/bin/x86_amd64/cl.exe"; then
CC="$with_cl_home/bin/x86_amd64/cl.exe"
fi
fi
if test -z "$CC"; then
AC_PATH_PROG(CC, cl.exe)
fi
if test -e "$CC"; then
# This gives us a posix path with 8.3 filename restrictions
CC=`cygpath -d "$CC"`
CC=`cygpath -u "$CC"`
# Remove /cl.exe from CC case insensitive
AC_MSG_RESULT([found ($CC)])
if test "$enable_cl_x64" = "" -o "$enable_cl_x64" = "no"; then
COMPATH=`echo $CC | $SED
's@\/[[Bb]][[Ii]][[Nn]]\/[[cC]][[lL]]\.[[eE]][[xX]][[eE]]@@'`
else
if test -n "$with_cl_home"; then
COMPATH=`echo $with_cl_home`
fi
fi
export INCLUDE=`cygpath -d "$COMPATH/Include"`
dnl Check which Microsoft C/C++ compiler is found
AC_MSG_CHECKING([the Version of Microsoft C/C++ Compiler])
dnl The following find microsoft, matches nn.nn.nnnn then pulls numbers out.
CCNUMVER=`$CC 2>&1 | $AWK "/Microsoft/ && /..\\...\\...../ {
x = match( \\\$0, /..\\...\\...../ )
CCversion = substr( \\\$0, RSTART, RLENGTH)
tokencount = split (CCversion,vertoken,\".\")
for ( i = 1 ; i <= tokencount ; i++ ) {
printf (\"%04d\",vertoken[[i]] )
}
}"`
AC_MSG_RESULT([found Compiler version $CCNUMVER.])
if test "$CCNUMVER" -ge "001600000000"; then
COMEX=13
MSVSVER=2010
AC_MSG_RESULT([found MSVS 2010.])
elif test "$CCNUMVER" -ge "001500000000"; then
COMEX=12
MSVSVER=2008
AC_MSG_RESULT([found MSVS 2008.])
else
AC_MSG_ERROR([Compiler too old. Use Microsoft Visual Studio 2008 or 2010.])
fi
else
AC_MSG_ERROR([Microsoft C/C++ Compiler not found. Use --with-cl-home or set path to
cl.exe.])
fi
else
AC_MSG_CHECKING([the Mingwin32 C++ Compiler])
if test `$CC -dumpmachine | $SED -e 's/^.*-//'` = "mingw32"; then
AC_MSG_RESULT([found.])
if $CC -dumpspecs | grep -q "mno-cygwin"; then
USE_MINGW="cygwin"
else
USE_MINGW="pure-mingw"
fi
else
AC_MSG_ERROR([Mingwin32 C++ Compiler not found.])
fi
fi
fi
AC_SUBST(COMEX)
AC_SUBST(MSPDB_PATH)
AC_SUBST(USE_MINGW)
dnl ===================================================================
dnl .NET needs special treatment
dnl (does the above comment really mean .NET, or is it misusing
dnl that to mean Visual Studio .NET 2003 ? And does this also
dnl in fact apply equally to what we actually support, i.e.
dnl Visual Studio 2008 and 2010?)
dnl ===================================================================
if test "$_os" = "WINNT"; then
if test "$WITH_MINGWIN" = "yes" || test "$COMEX" -ge "10"; then
dnl Check midl.exe
AC_PATH_PROG(MIDL_PATH, midl.exe)
if test -n "$MIDL_PATH";then
MIDL_PATH=`dirname "$MIDL_PATH"`
fi
if test -n "$with_midl_path";then
with_midl_path=`cygpath -u "$with_midl_path"`
fi
if test -x "$with_midl_path/midl.exe"; then
MIDL_PATH="$with_midl_path"
fi
if test -z "$MIDL_PATH" -a -e "$with_cl_home/../Common7/Tools/Bin/midl.exe"; then
MIDL_PATH="$with_cl_home/../Common7/Tools/Bin"
fi
if test -z "$MIDL_PATH" ; then
vstest=`./oowintool --msvs-productdir`;
if test -x "$vstest/Common7/Tools/Bin/midl.exe" ; then
MIDL_PATH="$vstest/Common7/Tools/Bin"
fi
fi
if test -z "$MIDL_PATH" ; then
psdktest=`./oowintool --psdk-home`
if test -x "$psdktest/Bin/midl.exe" ; then
MIDL_PATH="$psdktest/Bin"
fi
fi
if test ! -x "$MIDL_PATH/midl.exe"; then
AC_MSG_ERROR([midl.exe not found. Make sure it's in the path or use --with-midl-path])
fi
# Convert to posix path with 8.3 filename restrictions ( No spaces )
MIDL_PATH=`cygpath -d "$MIDL_PATH"`
MIDL_PATH=`cygpath -u "$MIDL_PATH"`
dnl Check csc.exe
AC_PATH_PROG(CSC_PATH, csc.exe)
if test -n "$CSC_PATH";then
CSC_PATH=`dirname "$CSC_PATH"`
fi
if test -n "$with_csc_path";then
with_csc_path=`cygpath -u "$with_csc_path"`
fi
if test -x "$with_csc_path/csc.exe"; then
CSC_PATH="$with_csc_path"
else
csctest=`./oowintool --csc-compilerdir`;
if test -x "$csctest/csc.exe"; then
CSC_PATH="$csctest"
fi
fi
if test ! -x "$CSC_PATH/csc.exe"; then
AC_MSG_ERROR([csc.exe not found. Make sure it's in the path or use --with-csc-path])
fi
# Convert to posix path with 8.3 filename restrictions ( No spaces )
CSC_PATH=`cygpath -d "$CSC_PATH"`
CSC_PATH=`cygpath -u "$CSC_PATH"`
dnl Check mscoree.lib / .NET Framework dir
AC_MSG_CHECKING(.NET Framework)
if test -n "$with_frame_home"; then
with_frame_home=`cygpath -u "$with_frame_home"`
fi
if test -f "$with_frame_home/lib/mscoree.lib"; then
FRAME_HOME="$with_frame_home"
fi
if test -z "$FRAME_HOME" ; then
frametest=`./oowintool --dotnetsdk-dir`
if test -f "$frametest/lib/mscoree.lib"; then
FRAME_HOME="$frametest"
else
frametest=`./oowintool --psdk-home`
if test -f "$frametest/lib/mscoree.lib"; then
FRAME_HOME="$frametest"
fi
fi
fi
if test ! -f "$FRAME_HOME/lib/mscoree.lib"; then
AC_MSG_ERROR([mscoree.lib (.NET Framework) not found. Make sure you use
--with-frame-home])
fi
AC_MSG_RESULT(found)
# Convert to posix path with 8.3 filename restrictions ( No spaces )
FRAME_HOME=`cygpath -d "$FRAME_HOME"`
FRAME_HOME=`cygpath -u "$FRAME_HOME"`
fi
AC_SUBST(MIDL_PATH)
AC_SUBST(CSC_PATH)
AC_SUBST(FRAME_HOME)
fi
dnl ===================================================================
dnl Check if stdc headers are available excluding windows.
dnl ===================================================================
if test "$_os" != "WINNT" -o "$WITH_MINGWIN" = "yes"; then
AC_HEADER_STDC
fi
dnl ===================================================================
dnl Find pre-processors.
dnl ===================================================================
if test "$_os" != "WINNT" -o "$WITH_MINGWIN" = "yes"; then
AC_PROG_CXXCPP
dnl Check whether there's a C pre-processor.
dnl ===================================================================
dnl When using SunStudio compiler, there is a bug with the cc
dnl preprocessor, so use CC preprocessor as the cc preprocessor
dnl See Issuezilla #445.
dnl ===================================================================
if test "$_os" = "SunOS"; then
CPP=$CXXCPP
else
AC_PROG_CPP
fi
fi
AC_CHECK_SIZEOF(long)
SIZEOF_LONG=$ac_cv_sizeof_long
AC_SUBST(SIZEOF_LONG)
AC_C_BIGENDIAN
WORDS_BIGENDIAN=$ac_cv_c_bigendian
AC_SUBST(WORDS_BIGENDIAN)
dnl Check for large file support
AC_SYS_LARGEFILE
if test -n "$ac_cv_sys_file_offset_bits"; then
LFS_CFLAGS="-D_FILE_OFFSET_BITS=$ac_cv_sys_file_offset_bits"
fi
if test -n "$ac_cv_sys_large_files" && test "$ac_cv_sys_large_files" != "no"; then
LFS_CFLAGS="$LFS_CFLAGS -D_LARGE_FILES"
fi
AC_SUBST(LFS_CFLAGS)
dnl ===================================================================
dnl Check if we are to enable vba macro interoperability feature
dnl ===================================================================
AC_MSG_CHECKING([whether to disable vba feature])
if test -n "$enable_vba" && test "$enable_vba" = "no"; then
AC_MSG_RESULT([yes])
ENABLE_VBA=NO
else
AC_MSG_RESULT([no])
ENABLE_VBA=YES
fi
AC_SUBST(ENABLE_VBA)
if test "$ENABLE_VBA" = "YES"; then
AC_MSG_CHECKING([how to package the vba compatibility api])
if test -n "$with_vba_package_format"; then
if test "$with_vba_package_format" = "extn"; then
VBA_EXTENSION=YES
AC_MSG_RESULT([uno extension])
AC_MSG_WARN([--with-vba-package-format=extn can cause problems])
else if test "$with_vba_package_format" = "builtin"; then
VBA_EXTENSION=NO
AC_MSG_RESULT([build into installset])
else
AC_MSG_ERROR([unknown packaging method])
fi
fi
else
VBA_EXTENSION=NO
AC_MSG_RESULT([defaulting to build into installset])
fi
else
VBA_EXTENSION=NO
fi
AC_SUBST(VBA_EXTENSION)
dnl ===================================================================
dnl Check the whether vba need to be delivered as an uno package or part
dnl of the install
dnl ===================================================================
dnl ===================================================================
dnl Check if cups/cups.h is available
dnl ===================================================================
if test "$test_cups" = "yes" -a "$ENABLE_CUPS" = "TRUE" ; then
AC_CHECK_HEADER(cups/cups.h, [],
[AC_MSG_ERROR([cups/cups.h could not be found. libcupsys2-dev or cups???-devel
missing?])], [])
fi
if test "$_os" = "Linux"; then
AC_MSG_CHECKING([whether to link to libcrypt])
if test -n "$enable_crypt_link" -a "$enable_crypt_link" != "no"; then
AC_MSG_RESULT([yes])
CRYPT_LINK=YES
AC_CHECK_LIB(crypt, crypt, [],
[AC_MSG_ERROR(libcrypt not found or functional)], [])
else
AC_MSG_RESULT([no, dynamically open it])
CRYPT_LINK=NO
fi
fi
AC_SUBST(CRYPT_LINK)
dnl ===================================================================
dnl Testing for c++ compiler and version...
dnl ===================================================================
if test "$_os" = "WINNT" -a "$WITH_MINGWIN" != "yes"; then
if test -e "$CC"; then
CXX="$CC"
fi
fi
dnl Autoconf 2.53 can do this test for cl.exe, 2.13 can't!
if test "$_os" != "WINNT" -o "$WITH_MINGWIN" = "yes"; then
AC_PROG_CXX
fi
dnl check if we are using a buggy version of g++ (currently 3.4.0, 3.4.1 and trunk)
if test "$GXX" = "yes"; then
AC_MSG_CHECKING([the GNU C++ compiler version])
_gpp_version=`$CXX -dumpversion`
_gpp_majmin=`echo $_gpp_version | $AWK -F. '{ print \$1*100+\$2 }'`
if test "$_os" = "Darwin" -a "$_gpp_majmin" -ge "401" ; then
if test -z "$save_CXX" -a -x "$GCC_HOME/bin/g++-4.0" ; then
CXX=$GCC_HOME/bin/g++-4.0
_gpp_majmin_2=`"$CXX" -dumpversion | $AWK -F. '{ print \$1*100+\$2 }'`
if test "$_gpp_majmin_2" -ge "400" -a "$_gpp_majmin_2" -lt "401" ; then
_gpp_majmin=$_gpp_majmin_2
fi
fi
if test "$_gpp_majmin" -ge "401" ; then
AC_MSG_ERROR([You need to use the g++-4.0 compiler (g++ $_gpp_version won't work with the
MacOSX10.4u.sdk) - set CXX accordingly])
else
AC_MSG_RESULT([implicitly using CXX=$CXX])
fi
else
AC_MSG_RESULT([checked (g++ $_gpp_version)])
fi
if test "$_gpp_majmin" = "304"; then
AC_MSG_CHECKING([whether $CXX has the enum bug])
AC_TRY_RUN([
extern "C" void abort (void);
extern "C" void exit (int status);
enum E { E0, E1, E2, E3, E4, E5 };
void
test (enum E e)
{
if (e == E2 || e == E3 || e == E1)
exit (1);
}
int
main (void)
{
test (E4);
test (E5);
test (E0);
return 0;
}
],[AC_MSG_ERROR([your version of the GNU C++ compile has a bug which prevents LibreOffice from
being compiled correctly - please check http://gcc.gnu.org/ml/gcc-patches/2004-07/msg00968.html for
details.])], [AC_MSG_RESULT([no])])
fi
fi
dnl ===================================================================
dnl Set the gcc/gxx include directories
dnl ===================================================================
# Removed the special FreeBSD treatment. The problem was that with_gxx_include_path
# often contains an i386 which is expanded as a macro. Solved in stlport.
if test "$GXX" = "yes"; then
AC_MSG_CHECKING([for g++ include path])
if test -z "$with_gxx_include_path"; then
with_gxx_include_path=`echo "#include <cstring>" | $CXX -E -xc++ - | $SED -n
'/.*1*"\(.*\)\/cstring".*/s//\1/p' | head -n 1`
if test "$with_gxx_include_path" = "/usr/libexec/(null)/include"; then
with_gxx_include_path="/usr/include"
fi
if test "$WITH_MINGWIN" = "yes"; then
with_gxx_include_path=`cygpath -d "$with_gxx_include_path"`
with_gxx_include_path=`cygpath -u "$with_gxx_include_path"`
fi
if echo $with_gxx_include_path | grep -q linux; then
# workaround for Mandriva - issue 100049
with_gxx_include_path=`cd $with_gxx_include_path && pwd`
fi
fi
fi
dnl This is the original code...
dnl with_gxx_include_path=`$CXX -print-search-dirs | grep instal |$AWK '{ print \$2 }'`/include
if test -z "$with_gxx_include_path"; then
with_gxx_include_path="NO_GXX_INCLUDE"
AC_MSG_RESULT([no g++ includes])
else
AC_MSG_RESULT([$with_gxx_include_path])
fi
GXX_INCLUDE_PATH="$with_gxx_include_path"
AC_SUBST(GXX_INCLUDE_PATH)
dnl ===================================================================
dnl Set the mingw runtime library include directories
dnl ===================================================================
if test "$WITH_MINGWIN" = "yes"; then
AC_MSG_CHECKING([for mingwin runtime include path])
cat >conftest.$ac_ext <<_ACEOF
#include <stddef.h>
#include <bits/c++config.h>
_ACEOF
_mingw_lib_include_path=`$CXX -E -xc++ conftest.$ac_ext | $SED -n -e
'/.*1*"\(.*\)\/stddef.h".*/s//\1/p' -e '/.*1*"\(.*\)\/bits\/c++config.h".*/s//\1/p' | sort -u |
xargs echo`
rm conftest.$ac_ext
if test -n "$_mingw_lib_include_path"; then
_temp=""
for a in $_mingw_lib_include_path
do
a=`cygpath -d "$a"`
_temp="$_temp "`cygpath -u "$a"`
done
_mingw_lib_include_path=$_temp
fi
if test -z "$_mingw_lib_include_path"; then
_mingw_lib_include_path="NO_LIB_INCLUDE"
AC_MSG_RESULT([no mingwin runtime includes])
else
AC_MSG_RESULT([$_mingw_lib_include_path])
fi
MINGW_LIB_INCLUDE_PATH="$_mingw_lib_include_path"
AC_SUBST(MINGW_LIB_INCLUDE_PATH)
dnl mingw gcc 4.4.0 needs backward in include path to use hash_set/hash_map
AC_MSG_CHECKING([for mingwin c++ backward include path])
cat >conftest.$ac_ext <<_ACEOF
#include <hash_set>
_ACEOF
_mingw_backward_include_path=`$CXX -E -xc++ -Wno-deprecated conftest.$ac_ext 2>&5| $SED -n -e
'/.*1*"\(.*\)\/hash_set".*/s//\1/p' | sort -u | xargs echo`
rm conftest.$ac_ext
if test -n "$_mingw_backward_include_path"; then
_mingw_backward_include_path=`cygpath -d $_mingw_backward_include_path`
_mingw_backward_include_path=`cygpath -u $_mingw_backward_include_path`
AC_MSG_RESULT([$_mingw_backward_include_path])
else
_mingw_backward_include_path="NO_BACKWARD_INCLUDE"
AC_MSG_RESULT([no mingwin c++ backward includes])
fi
MINGW_BACKWARD_INCLUDE_PATH="$_mingw_backward_include_path"
AC_SUBST(MINGW_BACKWARD_INCLUDE_PATH)
mingw_crtbegin=`$CC -print-file-name=crtbegin.o`
MINGW_CLIB_DIR=`dirname $mingw_crtbegin`
AC_MSG_CHECKING([whether to use dynamic libgcc])
if test -e "$MINGW_CLIB_DIR/libgcc_s.a"; then
AC_MSG_CHECKING([dynamic libgcc name])
MINGW_GCCDLL_pattern=`nm $MINGW_CLIB_DIR/libgcc_s.a | $SED -ne 's@.*
_libgcc\(.*\)_dll_iname@libgcc\1.dll@p' | uniq | $SED -e 's@_@?@g'`
MINGW_GCCDLL=`cd $COMPATH/bin && ls $MINGW_GCCDLL_pattern 2>/dev/null`
if test -n "$MINGW_GCCDLL"; then
MINGW_SHARED_GCCLIB=YES
AC_MSG_RESULT([use $MINGW_GCCDLL])
else
AC_MSG_RESULT([no])
fi
else
AC_MSG_RESULT([no])
fi
if test -e "$MINGW_CLIB_DIR/libgcc_eh.a"; then
MINGW_GCCLIB_EH=YES
fi
AC_MSG_CHECKING([whether to use dynamic libstdc++])
if test -e "$MINGW_CLIB_DIR/libstdc++_s.a" ; then
AC_MSG_CHECKING([dynamic libstdc++ name])
MINGW_GXXDLL_pattern=`nm $MINGW_CLIB_DIR/libstdc++_s.a | $SED -ne 's@.*
_libstdc__\(.*\)_dll_iname@libstdc++\1.dll@p' | uniq | $SED -e 's@_@?@g'`
MINGW_GXXDLL=`cd $COMPATH/bin && ls $MINGW_GXXDLL_pattern 2>/dev/null`
if test -n "$MINGW_GXXDLL"; then
MINGW_SHARED_GXXLIB=YES
AC_MSG_RESULT([use $MINGW_GXXDLL])
else
AC_MSG_RESULT([no])
fi
else
AC_MSG_RESULT([no])
fi
MINGW_CLIB_DIR=`cygpath $MINGW_CLIB_DIR`
AC_SUBST(MINGW_CLIB_DIR)
AC_SUBST(MINGW_SHARED_GCCLIB)
AC_SUBST(MINGW_GCCLIB_EH)
AC_SUBST(MINGW_SHARED_GXXLIB)
AC_SUBST(MINGW_GCCDLL)
AC_SUBST(MINGW_GXXDLL)
fi
dnl ===================================================================
dnl Extra checking for the SUN OS compiler
dnl ===================================================================
if test "$_os" = "SunOS"; then
dnl SunStudio C++ compiler packaged with SunStudio C compiler
if test "$CC" = "cc"; then
AC_MSG_CHECKING([SunStudio C++ Compiler])
if test "$CXX" != "CC"; then
AC_MSG_WARN([SunStudio C++ was not found])
echo "SunStudio C++ was not found" >> warn
else
AC_MSG_RESULT([checked])
fi
fi
fi
dnl ===================================================================
dnl Extra checking for the OSF compiler
dnl ===================================================================
if test "$_os" = "OSF1"; then
AC_MSG_CHECKING([Compaq C++ compiler version])
dnl cxx -V outputs to standard error!!!!
_compaqcxx_version=`$CXX -V 2>&1 | $AWK '{ print $3 }'`
_compaqcxx_major=`echo $_compaqcxx_version | $AWK -F. '{ print $1 }'`
if test "$_compaqcxx_major" != "V6"; then
AC_MSG_WARN([found version "$_compaqc_version", use version 6 of the Compaq C++ compiler])
echo "found version $_compaqc_version, use version 6 of the Compaq C++ compiler" >> warn
else
dnl compiler will do
AC_MSG_RESULT([checked])
fi
fi
dnl *************************************************************
dnl Testing for exception handling - dwarf2 or sjlj exceptions...
dnl *************************************************************
if test "$WITH_MINGWIN" = "yes"; then
AC_MSG_CHECKING([exception type])
AC_LANG_PUSH([C++])
AC_TRY_LINK(
[#include <iostream>
extern "C" void _Unwind_SjLj_RaiseException(void) __attribute__ ((__noreturn__));
],
[_Unwind_SjLj_RaiseException() ],
[exceptions_type="sjlj"],
[exceptions_type="dwarf2"]
)
AC_MSG_RESULT($exceptions_type)
AC_LANG_POP([C++])
fi
EXCEPTIONS="$exceptions_type"
AC_SUBST(EXCEPTIONS)
dnl **************************************************************
dnl Testing for required Solaris and SunStudio compiler patches...
dnl **************************************************************
dnl Check whether the OS is SunOS.
if test "$_os" = "SunOS"; then
_temp=`showrev -p | $AWK -F" " '{ print $2 }'`
if test "$_os_release" = "7"; then
dnl ***************
dnl patch 106327-06
dnl ***************
AC_MSG_CHECKING([for patch 106327-06 or greater])
_patch=`echo $_temp | $AWK '/106327-06/ { print "found" }'`
_patch="false"
for i in $_temp
do
_patch_major=`echo $i | $AWK -F"-" '{ print $1 }'`
if test "$_patch_major" = "106327"; then
_patch_rev=`echo $i | $AWK -F"-" '{ print $2 }'`
if test "$_patch_rev" -ge "6"; then
_patch="found"
fi
fi
done
if test "$_patch" = "found"; then
AC_MSG_RESULT([found])
else
AC_MSG_WARN([patch 106327-06 not found, please install compiler patch 106327-06 or
greater])
echo "patch 106327-06 not found, please install compiler patch 106327-06 or greater" >>
warn
fi
dnl ***************
dnl patch 106950-11
dnl ***************
AC_MSG_CHECKING([for patch 106950-11 or greater])
_patch=`echo $_temp | $AWK '/106950-11/ { print "found" }'`
_patch="false"
for i in $_temp
do
_patch_major=`echo $i | $AWK -F"-" '{ print $1 }'`
if test "$_patch_major" = "106950"; then
_patch_rev=`echo $i | $AWK -F"-" '{ print $2 }'`
if test "$_patch_rev" -ge "11"; then
_patch="found"
fi
fi
done
if test "$_patch" = "found"; then
AC_MSG_RESULT([found])
else
AC_MSG_WARN([patch 106950-11 not found, please install linker patch 106950-11 or greater])
echo "patch 106950-11 not found, please install linker patch 106950-11 or greater" >> warn
fi
else
if test "$_os_release" = "6"; then
dnl ***************
dnl patch 105591-09
dnl ***************
AC_MSG_CHECKING([for patch 105591-09 or greater])
_patch=`echo $_temp | $AWK '/105591-09/ { print "found" }'`
_patch="false"
for i in $_temp
do
_patch_major=`echo $i | $AWK -F"-" '{ print $1 }'`
if test "$_patch_major" = "105591"; then
_patch_rev=`echo $i | $AWK -F"-" '{ print $2 }'`
if test "$_patch_rev" -ge "9"; then
_patch="found"
fi
fi
done
if test "$_patch" = "found"; then
AC_MSG_RESULT([found])
else
AC_MSG_WARN([patch 105591-09 not found, please install compiler patch 105591-09 or
greater])
echo "patch 105591-09 not found, please install compiler patch 105591-09 or greater" >>
warn
fi
dnl ***************
dnl patch 107733-08
dnl ***************
AC_MSG_CHECKING([for patch 107733-08 or greater])
_patch=`echo $_temp | $AWK '/107733-08/ { print "found" }'`
_patch="false"
for i in $_temp
do
_patch_major=`echo $i | $AWK -F"-" '{ print $1 }'`
if test "$_patch_major" = "107733"; then
_patch_rev=`echo $i | $AWK -F"-" '{ print $2 }'`
if test "$_patch_rev" -ge "8"; then
_patch="found"
fi
fi
done
if test "$_patch" = "found"; then
AC_MSG_RESULT([found])
else
AC_MSG_WARN([patch 107733-06 not found, please install linker patch 107733-08 or
greater])
echo "patch 107733-06 not found, please install linker patch 107733-08 or greater" >>
warn
fi
fi
fi
fi
dnl ===================================================================
dnl Checks for what the default STL should be
dnl ===================================================================
AC_MSG_CHECKING([what the default STL should be])
DEFAULT_TO_STLPORT="no"
if test "$_os" = "Linux"; then
case "$build_cpu" in
i?86)
case "$build_os" in k*bsd*-gnu*)
DEFAULT_TO_STLPORT="no"
;;
*)
DEFAULT_TO_STLPORT="yes"
;;
esac
;;
*)
DEFAULT_TO_STLPORT="no"
;;
esac
elif test "$_os" = "SunOS"; then
DEFAULT_TO_STLPORT="yes"
elif test "$_os" = "WINNT" -a "$WITH_MINGWIN" != "yes"; then
DEFAULT_TO_STLPORT="yes"
elif test "$_os" = "OS2"; then
DEFAULT_TO_STLPORT="yes"
elif test "$_os" = "FreeBSD"; then
DEFAULT_TO_STLPORT="yes"
fi
if test "$DEFAULT_TO_STLPORT" = "yes"; then
AC_MSG_RESULT([stlport])
else
AC_MSG_RESULT([system])
fi
if test "$WITH_STLPORT" = "auto"; then
WITH_STLPORT=$DEFAULT_TO_STLPORT
fi
dnl ===================================================================
dnl Checks for STLPORT
dnl ===================================================================
AC_MSG_CHECKING([for STL providing headers])
STLPORT4=""
USE_SYSTEM_STL=""
if test "$WITH_STLPORT" = "yes"; then
AC_MSG_RESULT([using internal stlport.])
if test "$DEFAULT_TO_STLPORT" != "yes"; then
AC_MSG_WARN([using stlport. Warning, breaks your ABI compatability!])
echo "using stlport. Warning, breaks your ABI compatability!" >>warn
fi
elif test "$WITH_STLPORT" = "no"; then
AC_MSG_RESULT([using system STL])
USE_SYSTEM_STL="YES"
if test "$DEFAULT_TO_STLPORT" != "no"; then
AC_MSG_WARN([using system STL. Warning, breaks your ABI compatability!])
echo "using system STL. Warning, breaks your ABI compatability!" >>warn
fi
else
STLPORT4=$WITH_STLPORT
if test "$_os" != "WINNT" -o "$WITH_MINGWIN" = "yes"; then
AC_TRY_CPP($STLPORT4/stlport/hash_map, AC_MSG_RESULT([checked.]), AC_MSG_ERROR([STLport
headers not found.]))
else
dnl AC_TRY_CPP doesn't work for MSVC because C++ preprocessor is not found by autoconf.
if test -f "$STLPORT4/stlport/hash_map"; then
AC_MSG_RESULT([checked.])
else
AC_MSG_ERROR([STLport headers not found.])
fi
fi
if test "$_os" != "WINNT" -o "$WITH_MINGWIN" = "yes"; then
AC_MSG_CHECKING([for STLport libraries])
if test "$_os" = "SunOS"; then
if test -f "$STLPORT4/lib/libstlport_sunpro.so"; then
AC_MSG_RESULT([checked])
elif test -f "$STLPORT4/lib/libstlport.so"; then
AC_MSG_RESULT([checked])
STLPORT_VER=500
else
AC_MSG_ERROR([STLport libraries not found])
fi
elif test "$_os" = "Darwin"; then
if test -f "$STLPORT4/lib/libstlport_gcc.dylib"; then
AC_MSG_RESULT([checked])
elif test -f "$STLPORT4/lib/libstlport.dylib"; then
AC_MSG_RESULT([checked])
STLPORT_VER=500
else
AC_MSG_ERROR([STLport libraries not found])
fi
else
if test -f "$STLPORT4/lib/libstlport_gcc.so"; then
AC_MSG_RESULT([checked])
elif test -f "$STLPORT4/lib/libstlport.so"; then
AC_MSG_RESULT([checked])
STLPORT_VER=500
else
AC_MSG_ERROR([STLport libraries not found])
fi
fi
fi
if test "$DEFAULT_TO_STLPORT" != "yes"; then
AC_MSG_WARN([using stlport. Warning, breaks your ABI compatability!])
echo "using stlport. Warning, breaks your ABI compatability!" >>warn
fi
fi
if test -z "$STLPORT4"; then
STLPORT4="NO_STLPORT4"
fi
if test -z "$STLPORT_VER"; then
STLPORT_VER=400
fi
AC_SUBST(STLPORT4)
AC_SUBST(STLPORT_VER)
AC_SUBST(USE_SYSTEM_STL)
dnl ===================================================================
dnl visibility feature
dnl ===================================================================
if test "$GCC" = "yes"; then
AC_MSG_CHECKING([whether $CC supports -fvisibility=hidden])
save_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS -Werror -fvisibility=hidden"
AC_TRY_LINK([], [ return 0; ], [ HAVE_GCC_VISIBILITY_FEATURE=TRUE ], [])
CFLAGS=$save_CFLAGS
if test "$HAVE_GCC_VISIBILITY_FEATURE" = "TRUE"; then
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
fi
fi
# ===================================================================
# use --ccache-skip?
# ===================================================================
dnl used to escape compiler options for ccache that otherwise prevent
dnl caching of the results (like "-x objective-c++" for Mac)
AC_MSG_CHECKING([whether we are allowed and able to use --ccache-skip])
if test "$_os" != "Darwin" ; then
AC_MSG_RESULT([only used on Mac currently, skipping])
elif test "$enable_ccache_skip" = "no" ; then
AC_MSG_RESULT([no - diabled explicitly])
elif test "$enable_ccache_skip" = "yes" ; then
AC_MSG_RESULT([yes - enabled explicitly, skipping checks])
AC_SUBST([USE_CCACHE], [YES])
elif test "$enable_ccache_skip" = "auto" ; then
# checking for ccache presence/version
AC_MSG_RESULT([probing...])
AC_PATH_PROG([CCACHE],[ccache],[not_found])
if test "$CCACHE" = "not_found" ; then
AC_MSG_NOTICE([not enabling --ccache-skip (ccache not found)])
else
# check ccache version
AC_MSG_CHECKING([whether version of ccache is suitable])
CCACHE_VERSION=`"$CCACHE" -V | "$AWK" '/^ccache version/{print $3}'`
if test "$CCACHE_VERSION" = "2.4_OOo"; then
AC_MSG_RESULT([yes])
AC_MSG_CHECKING([whether ccache is actually used for the build])
AC_LANG_PUSH([C++])
save_CXXFLAGS=$CXXFLAGS
CXXFLAGS="$CXXFLAGS --ccache-skip -O2"
dnl an empty program will do, we're checking the compiler flags
AC_COMPILE_IFELSE(AC_LANG_PROGRAM([],[]),
[use_ccache=yes], [use_ccache=no])
if test $use_ccache = yes ; then
AC_MSG_RESULT([yes, will enable --ccache-skip])
AC_SUBST([USE_CCACHE], [YES])
else
AC_MSG_RESULT([no, will not enable --ccache-skip])
fi
CXXFLAGS=$save_CXXFLAGS
AC_LANG_POP([C++])
else
AC_MSG_RESULT([no])
AC_MSG_NOTICE([ccache version $CCACHE_VERSION not accepted. See description for
--enable-ccache-skip])
fi
fi
else
AC_MSG_ERROR([invalid option to --enable-ccache-skip. Valid values are "auto", "yes" and "no"])
fi
dnl ===================================================================
dnl system stl sanity tests
dnl ===================================================================
HAVE_GCC_VISIBILITY_BROKEN=
if test "$USE_SYSTEM_STL" = "YES"; then
AC_MSG_CHECKING([if hash_map will be in __gnu_cxx namespace])
AC_LANG_PUSH([C++])
AC_TRY_COMPILE([#include <ext/hash_map>
using namespace __gnu_cxx;
],[hash_map<int, int> t; return 0;],
ac_cv_cxx_have_ext_hash_map=yes, ac_cv_cxx_have_ext_hash_map=no)
if test "$ac_cv_cxx_have_ext_hash_map" = "no"; then
AC_MSG_ERROR([Can't find hash_map. Try with --with-stlport])
else
AC_MSG_RESULT([$ac_cv_cxx_have_ext_hash_map])
fi
if test "$HAVE_GCC_VISIBILITY_FEATURE" = "TRUE"; then
AC_MSG_CHECKING([if STL headers are visibility safe])
AC_EGREP_HEADER(visibility push, string, stlvisok=yes, stlvisok=no)
AC_MSG_RESULT([$stlvisok])
if test "$stlvisok" = "no"; then
AC_MSG_WARN([Your gcc STL headers are not visibility safe. Disabling visibility])
echo "Your gcc STL headers are not visibility safe. Disabling visibility" >> warn
unset HAVE_GCC_VISIBILITY_FEATURE
fi
fi
if test "$HAVE_GCC_VISIBILITY_FEATURE" = "TRUE"; then
sharedlink_ldflags_save=$LDFLAGS
LDFLAGS="$LDFLAGS -fvisibility-inlines-hidden -fpic -shared"
AC_MSG_CHECKING([if gcc is -fvisibility-inlines-hidden safe with STL headers])
AC_TRY_LINK([#include <sstream>
using namespace std;
],[istringstream strm( "test" ); return 0;],
$EGREP -q unresolvable conftest.err;
if test $? -eq 0; then gccvisok=no; else gccvisok=yes; fi,
gccvisok=no)
AC_MSG_RESULT([$gccvisok])
if test "$gccvisok" = "no"; then
AC_MSG_WARN([Your gcc is not -fvisibility-inlines-hidden safe, disabling that.])
echo "Your gcc is not -fvisibility-inlines-hidden safe, disabling that." >> warn
HAVE_GCC_VISIBILITY_BROKEN="TRUE"
fi
LDFLAGS=$sharedlink_ldflags_save
fi
if test "$HAVE_GCC_VISIBILITY_FEATURE" = "TRUE"; then
AC_MSG_CHECKING([if gcc has a visibility bug with class-level attributes (GCC bug 26905)])
cat >visibility.cxx <<_ACEOF
#pragma GCC visibility push(hidden)
struct __attribute__ ((visibility ("default"))) TestStruct {
static void Init();
};
__attribute__ ((visibility ("default"))) void TestFunc() {
TestStruct::Init();
}
_ACEOF
if ! $CXX $CXXFLAGS $CPPFLAGS -fpic -S visibility.cxx 2>/dev/null > /dev/null; then
gccvisbroken=yes
else
case "$build_cpu" in
i?86|x86_64|arm*)
if $EGREP -q '@PLT' visibility.s; then
gccvisbroken=no
else
gccvisbroken=yes
fi
;;
*)
gccvisbroken=no
;;
esac
fi
rm -f visibility.s
AC_MSG_RESULT([$gccvisbroken])
if test "$gccvisbroken" = "yes"; then
AC_MSG_WARN([Your gcc is not -fvisibility=hidden safe. Disabling visibility])
echo "Your gcc is not -fvisibility=hidden safe. Disabling visibility" >> warn
unset HAVE_GCC_VISIBILITY_FEATURE
fi
fi
AC_LANG_POP([C++])
fi
AC_SUBST(HAVE_GCC_VISIBILITY_FEATURE)
AC_SUBST(HAVE_GCC_VISIBILITY_BROKEN)
dnl ===================================================================
dnl allocator
dnl ===================================================================
AC_MSG_CHECKING([which memory allocator to use])
if test "$with_alloc" = "system"; then
AC_MSG_RESULT([system])
ALLOC="SYS_ALLOC";
AC_CHECK_FUNCS([malloc realloc calloc free])
fi
if test "$with_alloc" = "tcmalloc"; then
AC_MSG_RESULT(tcmalloc)
if ! echo $build_cpu | grep -E 'i[[3456]]86' 2>/dev/null >/dev/null; then
AC_MSG_ERROR([tcmalloc only available/usable on ix86])
fi
AC_CHECK_LIB(tcmalloc, malloc, [],
[AC_MSG_ERROR(tcmalloc not found or functional. Install the Google Profiling Tools)], [])
ALLOC="TCMALLOC";
fi
if test "$with_alloc" = "jemalloc"; then
if test "$_os" != "FreeBSD" -o "$_os" != "NetBSD"; then
AC_MSG_RESULT(jemalloc)
save_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS -pthread"
AC_CHECK_LIB(jemalloc, malloc, [],
[AC_MSG_ERROR(jemalloc not found or functional. Install the jemalloc allocator.)], [])
ALLOC="JEMALLOC";
CFLAGS=$save_CFLAGS
else
AC_MSG_RESULT([system])
ALLOC="SYS_ALLOC";
AC_CHECK_FUNCS([malloc realloc calloc free])
fi
fi
if test "$with_alloc" = "internal" -o -z "$with_alloc"; then
AC_MSG_RESULT([internal])
fi
AC_SUBST(ALLOC)
dnl ===================================================================
dnl Custom build version
dnl ===================================================================
AC_MSG_CHECKING([whether to add custom build version])
if test "z$with_build_version" != "z"; then
BUILD_VER_STRING=$with_build_version
AC_MSG_RESULT([yes, $BUILD_VER_STRING])
else
BUILD_VER_STRING=
AC_MSG_RESULT([no])
fi
AC_SUBST(BUILD_VER_STRING)
dnl ===================================================================
dnl Java support enable
dnl ===================================================================
AC_MSG_CHECKING([whether to build with Java support])
if test "$WITH_JAVA" != "no"; then
AC_MSG_RESULT([yes])
SOLAR_JAVA="TRUE"
else
AC_MSG_RESULT([no])
SOLAR_JAVA=""
AC_MSG_WARN([building without java will mean some features will not be available])
echo "building without java will mean some features will not be available" >>warn
fi
AC_SUBST(SOLAR_JAVA)
if test "$_os" = "Linux" && test "$build_cpu" = "powerpc"; then
# IBMs JDK needs this...
JITC_PROCESSOR_TYPE=6
export JITC_PROCESSOR_TYPE
fi
if test "$_os" = "WINNT"; then
if test -z "$with_jdk_home"; then
_jdk_home=`./oowintool --jdk-home`
if test -d "$_jdk_home"; then
with_jdk_home="$_jdk_home"
fi
else
with_jdk_home=`cygpath -u "$with_jdk_home"`
fi
fi
if test $_os = "WINNT"; then
WITH_VC_REDIST="TRUE"
fi
AC_SUBST(WITH_VC_REDIST)
dnl ===================================================================
dnl Checks for java
dnl ===================================================================
if test "$SOLAR_JAVA" != ""; then
JAVA_HOME=; export JAVA_HOME
if test -z "$with_jdk_home"; then
AC_PATH_PROG(JAVAINTERPRETER, $WITH_JAVA)
else
_java_path="$with_jdk_home/bin/$WITH_JAVA"
dnl Check if there is a java interpreter at all.
if test -x "$_java_path"; then
JAVAINTERPRETER=$_java_path
else
AC_MSG_ERROR([$_java_path not found set with_jdk_home])
fi
fi
if test "$_os" = "WINNT"; then
if test x`echo "$JAVAINTERPRETER" | grep -i '\.exe$'` = x; then
JAVAINTERPRETER="${JAVAINTERPRETER}.exe"
fi
JAVAINTERPRETER=`cygpath -d "$JAVAINTERPRETER"`
JAVAINTERPRETER=`cygpath -u "$JAVAINTERPRETER"`
elif test "$_os" = "Darwin"; then
dnl HACK: There currently is only a 32 bit version of LibO for Mac OS X,
dnl and Tiger java complains about -d32 while Snow Leopard java needs it
dnl to run in 32 bit mode and be able to load LibO jnilibs:
AC_MSG_CHECKING([whether to pass -d32 to Java interpreter])
if "$JAVAINTERPRETER" -d32 >&5 2>&5; then
AC_MSG_RESULT([yes])
JAVAIFLAGS=-d32
else
AC_MSG_RESULT([no])
fi
fi
fi
dnl ===================================================================
dnl Checks for JDK.
dnl ===================================================================
if test "$SOLAR_JAVA" != ""; then
_gij_longver=0
AC_MSG_CHECKING([the installed JDK])
if test -n "$JAVAINTERPRETER"; then
dnl java -version sends output to stderr!
if test `$JAVAINTERPRETER -version 2>&1 | grep -c "Kaffe"` -gt 0; then
AC_MSG_ERROR([No valid check available. Please check the block for your desired java in
configure.in])
# dnl Kaffe specific tests
# KAFFE_VER=`$JAVAINTERPRETER -version 2>&1 | $EGREP " Version:" | $SED -r "s/.* Version:
([[0-9\.]]*).*/\1/"`
# if test -z "$KAFFE_VER"; then
# AC_MSG_ERROR([looks like Kaffe but version detection failed])
# fi
# _kaffe_ver=`echo "$KAFFE_VER" | $AWK -F. '{ print (($1 * 100) + $2) * 100 + $3;}'`
# if test "$_kaffe_ver" -lt 10100; then
# AC_MSG_ERROR([Kaffe is too old ($KAFFE_VER - $_kaffe_ver), you need at least 1.1.0])
# fi
# JDK=kaffe
#
# dnl TODO: define some project exclusion variables
#
# AC_MSG_RESULT([checked (Kaffe $KAFFE_VER)])
# AC_MSG_WARN([EXPERIMENTAL: Kaffe is not a full JDK replacement - some projects will fail
to compile])
# echo "EXPERIMENTAL: Kaffe is not a full JDK replacement - some projects will fail to
compile" >>warn
# JAVA_HOME=`echo $JAVAINTERPRETER | $SED -n "s,//*bin//*java,,p"`
elif test `$JAVAINTERPRETER --version 2>&1 | grep -c "GNU libgcj"` -gt 0; then
JDK=gcj
AC_MSG_RESULT([checked (gcj)])
_gij_version=`$JAVAINTERPRETER --version | grep GNU | $SED -e 's@^[[^0-9]]*@@' -e 's@ .*@@'
-e 's@,.*@@'`;
_gij_longver=`echo $_gij_version | $AWK -F. '{ print \$1*10000+\$2*100+\$3 }'`
elif test `$JAVAINTERPRETER -version 2>&1 | $AWK '{ print }' | grep -c "BEA"` -gt 0; then
AC_MSG_ERROR([No valid check available. Please check the block for your desired java in
configure.in])
elif test `$JAVAINTERPRETER -version 2>&1 | $AWK '{ print }' | grep -c "IBM"` -gt 0; then
JDK=ibm
dnl IBM JDK specific tests
_jdk=`$JAVAINTERPRETER -version 2>&1 | $AWK -F'"' '{ print \$2 }' | $SED s/[[-A-Za-z]]*//`
_jdk_ver=`echo "$_jdk" | $AWK -F. '{ print (($1 * 100) + $2) * 100 + $3;}'`
if test "$_jdk_ver" -lt 10500; then
AC_MSG_ERROR([IBM JDK is too old, you need at least 1.5])
fi
AC_MSG_RESULT([checked (IBM JDK $_jdk)])
if test "$with_jdk_home" = ""; then
AC_MSG_ERROR([In order to successfully build LibreOffice using the IBM JDK,
you must use the "--with-jdk-home" configure option explicitly])
fi
JAVA_HOME=$with_jdk_home
else
JDK=sun
dnl SUN JDK specific tests
_jdk=`$JAVAINTERPRETER -version 2>&1 | $AWK -F'"' '{ print \$2 }' | $SED s/[[-A-Za-z]]*//`
_jdk_ver=`echo "$_jdk" | $AWK -F. '{ print (($1 * 100) + $2) * 100 + $3;}'`
if test "$_jdk_ver" -lt 10500; then
AC_MSG_ERROR([JDK is too old, you need at least 1.5])
fi
AC_MSG_RESULT([checked (JDK $_jdk)])
JAVA_HOME=`echo $JAVAINTERPRETER | $SED -n "s,//*bin//*java,,p"`
if test "$_os" = "WINNT"; then
JAVA_HOME=`echo $JAVA_HOME | $SED "s,\.[[eE]][[xX]][[eE]]$,,"`
fi
if test "$_os" = "OS2"; then
JAVA_HOME=`echo $JAVA_HOME | $SED "s,\.[[eE]][[xX]][[eE]]$,,"`
fi
fi
else
AC_MSG_ERROR([JAVA not found. You need at least jdk-1.5, or gcj-4])
fi
else
dnl Java disabled
JAVA_HOME=NO_JAVA_HOME ; export JAVA_HOME
fi
_java_target_ver="1.5"
dnl ===================================================================
dnl Check for target java bytecode version
dnl ===================================================================
if test "$SOLAR_JAVA" != ""; then
AC_MSG_CHECKING([for target java bytecode version])
if test "$JDK" = "gcj" -o "$JDK" = "kaffe"; then
AC_MSG_RESULT([default by $JDK])
if test -n "$with_java_target_version" -a "$with_java_target_version" != "no" ; then
AC_MSG_WARN([Value defined by --with-java-target-version is ignored!])
fi
else
if test -n "$with_java_target_version" -a "$with_java_target_version" != "no" ; then
_java_target_ver="$with_java_target_version"
AC_MSG_RESULT([$_java_target_ver])
elif test $_jdk_ver -gt 10000 ; then
_java_target_ver=`echo "$_jdk_ver" | $AWK '{ maj=substr($0,1,1); min=substr($0,2,2); print
int(maj)"."int(min) }'`
AC_MSG_RESULT([$_java_target_ver])
else
AC_MSG_ERROR([Unable to guess java bytecode version from java version!])
fi
fi
if ! test -z "$_java_target_ver" -o \
"$_java_target_ver" = "1.1" -o \
"$_java_target_ver" = "1.2" -o \
"$_java_target_ver" = "1.3" -o \
"$_java_target_ver" = "1.4" -o \
"$_java_target_ver" = "1.5" -o \
"$_java_target_ver" = "1.6" -o \
"$_java_target_ver" = "5" ; then
AC_MSG_ERROR([$_java_target_ver is not supported java bytecode version!])
fi
JAVA_SOURCE_VER="$_java_target_ver"
JAVA_TARGET_VER="$_java_target_ver"
fi
dnl ===================================================================
dnl Checks for javac
dnl ===================================================================
if test "$SOLAR_JAVA" != ""; then
if test "$JDK" = "gcj"; then
javacompiler=`echo $WITH_JAVA | $SED -e "s/gij/gcj/g" | $SED -e "s/java/javac/g"`
else
javacompiler="javac"
fi
if test "$_os" = "OS2"; then
if test x`echo "$javacompiler" | grep -i '\.exe$'` = x; then
javacompiler="${javacompiler}.exe"
fi
fi
if test -z "$with_jdk_home"; then
AC_PATH_PROG(JAVACOMPILER, $javacompiler)
else
_javac_path="$with_jdk_home/bin/$javacompiler"
dnl Check if there is a java compiler at all.
if test -x "$_javac_path"; then
JAVACOMPILER=$_javac_path
fi
fi
if test -z "$JAVACOMPILER"; then
AC_MSG_ERROR([$javacompiler not found set with_jdk_home])
fi
if test "$_os" = "WINNT"; then
if test x`echo "$JAVACOMPILER" | grep -i '\.exe$'` = x; then
JAVACOMPILER="${JAVACOMPILER}.exe"
fi
JAVACOMPILER=`cygpath -d "$JAVACOMPILER"`
JAVACOMPILER=`cygpath -u "$JAVACOMPILER"`
fi
if test "$_os" = "OS2"; then
if test x`echo "$JAVACOMPILER" | grep -i '\.exe$'` = x; then
JAVACOMPILER="${JAVACOMPILER}.exe"
fi
fi
if test `$JAVACOMPILER -version 2>&1 | grep -c "Eclipse Java Compiler"` -gt 0; then
AC_MSG_CHECKING([re-checking JDK])
JDK=gcj
AC_MSG_RESULT([checked (ecj)])
#TODO: what's to do here? some switch to do 1.5 compiling?
JAVAFLAGS="-source 1.5 -target 1.5"
_gij_longver="40200"
fi
fi
JAVACISGCJ=""
dnl ===================================================================
dnl Checks that javac is gcj
dnl ===================================================================
if test "$SOLAR_JAVA" != ""; then
if test `$JAVACOMPILER --version 2>&1 | grep -c "GCC"` -gt 0; then
JAVACISGCJ="yes"
fi
fi
AC_SUBST(JAVACISGCJ)
JAVACISKAFFE=""
dnl ===================================================================
dnl Checks that javac is kaffe
dnl ===================================================================
if test "$SOLAR_JAVA" != ""; then
if test `$JAVACOMPILER -version 2>&1 | grep -c "Kaffe"` -gt 0; then
JAVACISKAFFE="yes"
fi
fi
AC_SUBST(JAVACISKAFFE)
dnl ===================================================================
dnl Checks for javadoc
dnl ===================================================================
if test "$SOLAR_JAVA" != ""; then
if test -z "$with_jdk_home"; then
AC_PATH_PROG(JAVADOC, javadoc)
else
_javadoc_path="$with_jdk_home/bin/javadoc"
if test "$_os" = "OS2"; then
if test x`echo "$_javadoc_path" | grep -i '\.exe$'` = x; then
_javadoc_path="${_javadoc_path}.exe"
fi
fi
dnl Check if there is a javadoc at all.
if test -x "$_javadoc_path"; then
JAVADOC=$_javadoc_path
else
AC_PATH_PROG(JAVADOC, javadoc)
fi
fi
if test -z "$JAVADOC"; then
AC_MSG_ERROR([$_javadoc_path not found set with_jdk_home])
fi
if test "$_os" = "WINNT"; then
if test x`echo "$JAVADOC" | grep -i '\.exe$'` = x; then
JAVADOC="${JAVADOC}.exe"
fi
JAVADOC=`cygpath -d "$JAVADOC"`
JAVADOC=`cygpath -u "$JAVADOC"`
fi
if test "$_os" = "OS2"; then
if test x`echo "$JAVADOC" | grep -i '\.exe$'` = x; then
JAVADOC="${JAVADOC}.exe"
fi
fi
fi
if test "$SOLAR_JAVA" != ""; then
# don't do this test on Mac
if test "$_os" != "Darwin" ; then
dnl first check if we have been asked to autodetect JAVA_HOME with a recent gij
if test "$JAVA_HOME" = "/usr" -o -z "$JAVA_HOME"; then
if test "x$with_jdk_home" = "x"; then
cat > findhome.java <<_ACEOF
[import java.io.File;
class findhome
{
public static void main(String args[])
{
String jrelocation = System.getProperty("java.home");
File jre = new File(jrelocation);
System.out.println(jre.getParent());
}
}]
_ACEOF
AC_MSG_CHECKING([if javac works])
javac_cmd="$JAVACOMPILER findhome.java 1>&2"
AC_TRY_EVAL(javac_cmd)
if test $? = 0 && test -f ./findhome.class ; then
AC_MSG_RESULT([javac works])
else
echo "configure: javac test failed" >&5
cat findhome.java >&5
AC_MSG_ERROR([javac does not work - java projects will not build!])
fi
AC_MSG_CHECKING([if gij knows its java.home])
JAVA_HOME=`$JAVAINTERPRETER findhome`
if test $? = 0 && test "$JAVA_HOME" != "" ; then
AC_MSG_RESULT([$JAVA_HOME])
else
echo "configure: java test failed" >&5
cat findhome.java >&5
AC_MSG_ERROR([gij does not know its java.home - use --with-jdk-home])
fi
else
JAVA_HOME=`echo $JAVAINTERPRETER | $SED -n "s,//*bin//*$WITH_JAVA,,p"`
fi
fi
fi
dnl second sanity check JAVA_HOME if possible
if test "$JDK" != "gcj" -o "$_gij_longver" -ge "40200"; then
# check if JAVA_HOME was (maybe incorrectly?) set automatically to /usr
if test "$JAVA_HOME" = "/usr" -a "x$with_jdk_home" = "x"; then
if basename $(readlink $(readlink $JAVACOMPILER)) >/dev/null 2>/dev/null; then
# try to recover first by looking whether we have a alternatives
# system as in Debian or newer SuSEs where following /usr/bin/javac
# over /etc/alternatives/javac leads to the right bindir where we
# just need to strip a bit away to get a valid JAVA_HOME
JAVA_HOME=$(readlink $(readlink $JAVACOMPILER))
elif readlink $JAVACOMPILER >/dev/null 2>/dev/null; then
# maybe only one level of symlink (e.g. on Mac)
JAVA_HOME=$(readlink $JAVACOMPILER)
else
# else warn
AC_MSG_WARN([JAVA_HOME is set to /usr - this is very likely to be incorrect])
AC_MSG_WARN([if this is the case, please inform the correct JAVA_HOME with
--with-jdk-home])
echo "JAVA_HOME is set to /usr - this is very likely to be incorrect" >> warn
echo "if this is the case, please inform the correct JAVA_HOME with --with-jdk-home" >>
warn
fi
dnl now that we have the path to the real javac, make a JAVA_HOME out of it..
if test "$JAVA_HOME" != "/usr"; then
if test "$_os" = "Darwin"; then
dnl Leopard returns a non-suitable path with readlink - points to "Current" only
JAVA_HOME=$(echo $JAVA_HOME | $SED -e s,/Current/Commands/javac$,/CurrentJDK/Home,)
dnl Tiger already returns a JDK path..
JAVA_HOME=$(echo $JAVA_HOME | $SED -e
s,/CurrentJDK/Commands/javac$,/CurrentJDK/Home,)
else
JAVA_HOME=$(echo $JAVA_HOME | $SED -e s,/bin/javac$,,)
fi
fi
fi
# now check if $JAVA_HOME is really valid
if test "$_os" = "Darwin"; then
if test ! -f "$JAVA_HOME/lib/jvm.cfg" -a "x$with_jdk_home" = "x"; then
JAVA_HOME_OK="NO"
fi
elif test ! -d "$JAVA_HOME/jre" -a "x$with_jdk_home" = "x"; then
JAVA_HOME_OK="NO"
fi
if test "$JAVA_HOME_OK" = "NO"; then
AC_MSG_WARN([JAVA_HOME was not explicitly informed with --with-jdk-home. the configure
script])
AC_MSG_WARN([attempted to find JAVA_HOME automatically, but apparently it failed])
AC_MSG_WARN([in case JAVA_HOME is incorrectly set, some projects with not be built
correctly])
echo "JAVA_HOME was not explicitly informed with --with-jdk-home. the configure script" >>
warn
echo "attempted to find JAVA_HOME automatically, but apparently it failed" >> warn
echo "in case JAVA_HOME is incorrectly set, some projects with not be built correctly" >>
warn
# if test "$JDK" = "gcj"; then
# echo "e.g. install java-1.4.2-gcj-compat-devel and use
--with-jdk-home=/usr/lib/jvm/java-1.4.2-gcj" >> warn
# fi
fi
fi
fi
AWTLIB=
if test "$SOLAR_JAVA" != ""; then
AC_MSG_CHECKING([for jawt lib name])
if test "$JDK" = "gcj"; then
save_CFLAGS=$CFLAGS
save_LDFLAGS=$LDFLAGS
CFLAGS="$CFLAGS -I$JAVA_HOME/include"
LDFLAGS="$LDFLAGS -L$JAVA_HOME/lib -lgcj"
exec 6>/dev/null # no output
AC_CHECK_HEADER(jni.h, [],
[AC_MSG_ERROR([jni.h could not be found. Mismatch between gcc and libgcj or
libgcj-devel missing?])], [])
AC_CHECK_LIB(gcjawt, JAWT_GetAWT, [ AWTLIB="-lgcjawt -lgcj"] )
exec 6>&1 # output on again
CFLAGS=$save_CFLAGS
LDFLAGS=$save_LDFLAGS
fi
# IBM SDK 1.5.0-sr5 includes libjawt.so with unresolved symbols.
# A workaround is to link also against libpmawt.so
if test "$JDK" = "ibm" ; then
save_CFLAGS=$CFLAGS
save_LDFLAGS=$LDFLAGS
save_LD_LIBRARY_PATH=$LD_LIBRARY_PATH
CFLAGS="$CFLAGS -I$JAVA_HOME/include"
LDFLAGS="$LDFLAGS -L$JAVA_HOME/jre/bin"
LD_LIBRARY_PATH=$JAVA_HOME/jre/bin:$JAVA_HOME/jre/bin/classic:$JAVA_HOME/jre/bin/xawt:$LD_LIBRARY_PATH
export LD_LIBRARY_PATH
exec 6>/dev/null # no output
AC_CHECK_HEADER(jni.h, [],
[AC_MSG_ERROR([jni.h could not be found.])], [])
AC_CHECK_LIB(jawt, JAWT_GetAWT, [ AWTLIB="-ljawt"] )
if test -z "$AWTLIB"; then
LDFLAGS="$LDFLAGS -L$JAVA_HOME/jre/bin/xawt -ljawt"
AC_CHECK_LIB(mawt, JAWT_GetAWT, [ AWTLIB="-L$JAVA_HOME/jre/bin/xawt -ljawt -lmawt"])
fi
exec 6>&1 # output on again
CFLAGS=$save_CFLAGS
LDFLAGS=$save_LDFLAGS
LD_LIBRARY_PATH=$save_LD_LIBRARY_PATH
fi
if test -z "$AWTLIB"; then
AWTLIB=-ljawt
fi
AC_MSG_RESULT([$AWTLIB])
AC_SUBST(AWTLIB)
fi
dnl ===================================================================
dnl Check for optional gcj for AOT
dnl ===================================================================
if test "$SOLAR_JAVA" != ""; then
AC_MSG_CHECKING([whether to enable gcj aot compilation])
if test -n "$enable_gcjaot" && test "$enable_gcjaot" != "no"; then
AC_MSG_RESULT([yes])
if test `echo $WITH_JAVA | grep -c "gij"` -eq 0; then
gcjaot="gcj"
else
gcjaot=`echo $WITH_JAVA | $SED -e "s/gij/gcj/g"`
fi
AC_MSG_RESULT([$gcjaot])
if test -n "$with_jdk_home"; then
_javac_path="$with_jdk_home/bin/$gcjaot"
dnl Check if there is a gcj at all.
if test -x "$_javac_path"; then
JAVAAOTCOMPILER=$_javac_path
fi
fi
if test -z "$JAVAAOTCOMPILER"; then
AC_PATH_PROG(JAVAAOTCOMPILER, $gcjaot)
fi
if test -z "$JAVAAOTCOMPILER"; then
AC_MSG_WARN([$gcjaot not found, set with_jdk_home])
fi
else
AC_MSG_RESULT([no])
fi
fi
AC_SUBST(JAVA_HOME)
AC_SUBST(JDK)
AC_SUBST(JAVAFLAGS)
AC_SUBST(JAVA_SOURCE_VER)
AC_SUBST(JAVA_TARGET_VER)
AC_SUBST(JAVAINTERPRETER)
AC_SUBST(JAVAIFLAGS)
AC_SUBST(JAVACOMPILER)
AC_SUBST(JAVAAOTCOMPILER)
AC_SUBST(JAVADOC)
dnl ===================================================================
dnl Checks for specific files.
dnl ===================================================================
dnl ===================================================================
dnl Checks for programs.
dnl ===================================================================
dnl ===================================================================
dnl Check whether we already have dmake
dnl ===================================================================
AC_PATH_PROG(DMAKE, dmake, no)
if test "$DMAKE" = "no"; then
BUILD_DMAKE=YES
echo "dmake will be built on ./bootstrap"
else
AC_MSG_CHECKING([whether the found dmake is the right dmake])
# we need to find out whether that dmake we found is "our" dmake
# or the dmake from Sun's SunStudio Compiler which is something
# different
# This test _should_ work because the one accepts -V (ours) and one
# (the other) not...
$DMAKE -V 2>/dev/null | grep 'dmake .* Version .*' >/dev/null
if test $? -eq 0; then
BUILD_DMAKE=NO
AC_MSG_RESULT([yes])
AC_MSG_CHECKING([the dmake version])
DMAKE_VERSION=`$DMAKE -V | $AWK '$3 == "Version" {print $4}'`
if test "`echo $DMAKE_VERSION | cut -d'.' -f1`" -gt "4"; then
AC_MSG_RESULT([OK, >= 4.11])
elif test "`echo $DMAKE_VERSION | cut -d'.' -f1`" = "4" && \
test "`echo $DMAKE_VERSION | cut -d'.' -f2`" -ge "11"; then
AC_MSG_RESULT([OK, >= 4.11])
else
AC_MSG_RESULT([too old. >= 4.11 is needed])
echo "A newer dmake will be built on ./bootstrap"
BUILD_DMAKE=YES
fi
else
AC_MSG_RESULT([no])
echo "dmake will be built on ./bootstrap"
BUILD_DMAKE=YES
fi
fi
AC_SUBST(BUILD_DMAKE)
AC_MSG_CHECKING([whether to enable EPM for packing])
BUILD_EPM=NO
if test "$enable_epm" = "yes"; then
AC_MSG_RESULT([yes])
dnl ===================================================================
dnl Check for epm - not needed for windows
dnl ===================================================================
if test "$_os" != "WINNT"; then
if test -n "$with_epm"; then
EPM=$with_epm
else
AC_PATH_PROG(EPM, epm, no)
fi
if test "$EPM" = "no" || test "$EPM" = "internal"; then
echo "EPM will be built."
BUILD_EPM=YES
BUILD_TYPE="$BUILD_TYPE EPM"
else
# Gentoo has some epm which is something different...
AC_MSG_CHECKING([whether the found epm is the right epm])
if $EPM | grep "ESP Package Manager" >/dev/null 2>/dev/null; then
AC_MSG_RESULT([yes])
else
AC_MSG_ERROR([no. Install ESP Package Manager (www.easysw.com/epm) and/or specify the
path to the right epm])
fi
AC_MSG_CHECKING([epm version])
EPM_VERSION=`$EPM | grep 'ESP Package Manager' | cut -d' ' -f4 | $SED -e s/v//`
if test "`echo $EPM_VERSION | cut -d'.' -f1`" -gt "3" || \
test "`echo $EPM_VERSION | cut -d'.' -f1`" -eq "3" -a "`echo $EPM_VERSION | cut -d'.'
-f2`" -ge "7"; then
AC_MSG_RESULT([OK, >= 3.7])
BUILD_EPM=NO
if test "$_os" = "Darwin"; then
AC_MSG_CHECKING([which PackageMaker EPM thinks to use])
_pm=`strings $EPM | grep PackageMaker | cut -d" " -f1`
if test "$_pm" =
"/Developer/Applications/PackageMaker.app/Contents/MacOS/PackageMaker"; then
AC_MSG_ERROR([$_pm; PackageMaker expected in wrong path. Either patch your
epm with the right path
(/Developer/Applications/Utilities/PackageMaker.app/Contents/MacOS/PackageMaker) or use internal
patched epm (--with-epm=internal)])
elif test "$_pm" =
"/Developer/Applications/Utilities/PackageMaker.app/Contents/MacOS/PackageMaker"; then
AC_MSG_RESULT([$_pm, ok])
else # we never should get here, but go safe
AC_MSG_ERROR([$_pm; PackageMaker expected in unknown path. Either patch your
epm with the right path
(/Developer/Applications/Utilities/PackageMaker.app/Contents/MacOS/PackageMaker) or use internal
patched epm (--with-epm=internal)])
fi
fi
else
AC_MSG_RESULT([too old. epm >= 3.7 is required.])
echo "EPM will be built."
BUILD_EPM=YES
BUILD_TYPE="$BUILD_TYPE EPM"
fi
fi
fi
# test which package format to use
AC_MSG_CHECKING([which package format to use])
# defaults
case "$_os" in
OS2)
PKGFORMAT=native
;;
Darwin)
PKGFORMAT=dmg
;;
SunOS)
PKGFORMAT=pkg
;;
Linux)
# if building on Debian, default should be deb...
if test -e /etc/debian_version; then
PKGFORMAT=deb
else
PKGFORMAT=rpm
fi
;;
AIX)
PKGFORMAT=rpm
;;
OpenBSD)
PKGFORMAT=portable
;;
*BSD)
PKGFORMAT=bsd
;;
OSF1)
PKGFORMAT=setld
;;
WINNT)
PKGFORMAT=msi
;;
# we never should get here since we check the arciecture/os at the beginning,
# but go sure...
*)
AC_MSG_ERROR([unknown system])
esac
if test -n "$with_package_format"; then
for i in $with_package_format; do
case "$i" in
aix | bsd | deb | inst | tardist | osx | pkg | rpm | setld | native | portable |
archive | dmg | installed | msi)
;;
*)
AC_MSG_ERROR([unsupported format $i. Supported by EPM are:
aix - AIX software distribution
bsd - FreeBSD, NetBSD, or OpenBSD software distribution
depot or swinstall - HP-UX software distribution
deb - Debian software distribution
inst or tardist - IRIX software distribution
osx - MacOS X software distribution
pkg - Solaris software distribution
rpm - RedHat software distribution
setld - Tru64 (setld) software distribution
native - "Native" software distribution for the platform
portable - Portable software distribution
LibO additionally supports:
archive - .tar.gz or .zip
dmg - Mac OS X .dmg
installed - installation tree
msi - Windows .msi
])
;;
esac
done
PKGFORMAT="$with_package_format"
fi
AC_MSG_RESULT([$PKGFORMAT])
if echo "$PKGFORMAT" | $EGREP rpm 2>&1 >/dev/null; then
AC_MSG_CHECKING([for rpm])
for a in "$RPM" rpmbuild rpm; do
$a --usage >/dev/null 2> /dev/null
if test $? -eq 0; then
RPM=$a
break
else
$a --version >/dev/null 2> /dev/null
if test $? -eq 0; then
RPM=$a
break
fi
fi
done
if test -z "$RPM" ; then
AC_MSG_ERROR([not found])
elif "$RPM" --help 2>&1 | $EGREP buildroot >/dev/null; then
RPM_PATH=`which $RPM`
AC_MSG_RESULT([$RPM_PATH])
else
AC_MSG_ERROR([cannot build packages. Try installing rpmbuild.])
fi
fi
if echo "$PKGFORMAT" | $EGREP deb 2>&1 >/dev/null; then
AC_PATH_PROG(DPKG, dpkg, no)
if test "$DPKG" = "no"; then
AC_MSG_ERROR([dpkg needed for deb creation. Install dpkg.])
fi
fi
if echo "PKGFORMAT" | $EGREP osx 2>&1 >/dev/null; then
if test "$_os" = "Darwin"; then
AC_MSG_CHECKING([for PackageMaker availability])
if ! test -x
/Developer/Applications/Utilities/PackageMaker.app/Contents/MacOS/PackageMaker; then
AC_MSG_ERROR([not installed. Please install Apples Dev Tools])
else
AC_MSG_RESULT([ok])
fi
else
AC_MSG_ERROR([PackageMaker needed to build OSX packages and you are not on OSX...])
fi
fi
if echo "$PKGFORMAT" | $EGREP rpm 2>&1 >/dev/null || \
echo "$PKGFORMAT" | $EGREP pkg 2>&1 >/dev/null; then
if test "$EPM" != "no" && test "$EPM" != "internal"; then
if test "`echo $EPM_VERSION | cut -d'.' -f1`" -lt "4"; then
AC_MSG_CHECKING([whether epm is patched for LibOs needs])
if grep "Patched for LibreOffice" $EPM >/dev/null 2>/dev/null; then
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
if echo "$PKGFORMAT" | grep -q rpm; then
_pt="rpm"
AC_MSG_WARN([the rpms will need to be installed with --nodeps])
echo "the rpms will need to be installed with --nodeps" >> warn
else
_pt="pkg"
fi
AC_MSG_WARN([the ${_pt}s will not be relocateable])
echo "the ${_pt}s will not be relocateable" >> warn
AC_MSG_WARN([if you want to make sure installation without --nodeps and
relocation will work, you need to patch your epm with the
patch in epm/epm-3.7.patch or build with
--with-epm=internal which will build a suitable epm])
fi
fi
fi
fi
if echo "$PKGFORMAT" | $EGREP pkg 2>&1 >/dev/null; then
AC_PATH_PROG(PKGMK, pkgmk, no)
if test "$PKGMK" = "no"; then
AC_MSG_ERROR([pkgmk needed for Solaris pkg creation. Install it.])
fi
fi
AC_SUBST(RPM)
AC_SUBST(DPKG)
AC_SUBST(PKGMK)
else
AC_MSG_RESULT([no])
EPM=NO
PKGFORMAT=native
fi
AC_SUBST(EPM)
AC_SUBST(BUILD_EPM)
AC_SUBST(PKGFORMAT)
dnl ===================================================================
dnl Check for gperf
dnl ===================================================================
AC_PATH_PROG(GPERF, gperf)
if test -z "$GPERF"; then
AC_MSG_ERROR([gperf not found but needed. Install it.])
fi
AC_MSG_CHECKING([gperf version])
if test "`$GPERF --version | $EGREP ^GNU\ gperf | $AWK '{ print $3 }' | cut -d. -f1`" -ge "3"; then
AC_MSG_RESULT([OK])
else
AC_MSG_ERROR([too old, you need at least 3.0.0])
fi
dnl ===================================================================
dnl Check for pkg-config
dnl # Note that if there is a possibility the first call to
dnl # PKG_CHECK_MODULES might not happen, you should be sure to include an
dnl # explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
dnl ===================================================================
if test "$_os" != "WNT"; then
PKG_PROG_PKG_CONFIG
fi
dnl ===================================================================
dnl Check for building stax
dnl ===================================================================
AC_MSG_CHECKING([whether to build the stax])
if test -f "./stax/download/jsr173_1.0_api.jar"; then
BUILD_STAX=NO
AC_MSG_RESULT([no, will use the prebuilt stax/download/jsr173_1.0_api.jar])
else
BUILD_STAX=YES
AC_MSG_RESULT([yes])
fi
AC_SUBST(BUILD_STAX)
dnl ===================================================================
dnl Check for building ODK
dnl ===================================================================
AC_MSG_CHECKING([whether to build the ODK])
if test "z$enable_odk" = "z" -o "$enable_odk" != "no"; then
AC_MSG_RESULT([yes])
if test "$WITH_JAVA" != "no"; then
AC_MSG_CHECKING([whether to build unowinreg.dll])
if test "$_os" = "WINNT" -a "z$enable_build_unowinreg" = "z" ; then
# build on Win by default
enable_build_unowinreg=yes
fi
if test "z$enable_build_unowinreg" = "z" -o "$enable_build_unowinreg" = "no"; then
AC_MSG_RESULT([no])
BUILD_UNOWINREG=NO
else
AC_MSG_RESULT([yes])
BUILD_UNOWINREG=YES
fi
if test "$_os" != "WINNT" && test "$BUILD_UNOWINREG" = "YES"; then
if test -z "$WITH_MINGWIN" || test "$WITH_MINGWIN" = "0"; then
AC_MSG_ERROR([for rebuilding unowinreg.dll you need the mingw32 C++ compiler.
Specify mingw32 g++ executable name with --with-mingwin.
Or use prebuilt one from http://tools.openoffice.org/unowinreg_prebuild/680/ and
put it into external/unowinreg])
fi
if echo "$WITH_MINGWIN" | $EGREP -q "/"; then
if ! test -x "$WITH_MINGWIN"; then MINGWCXX=false; else MINGWCXX=`basename $WITH_MINGWIN`;
fi
else
AC_CHECK_TOOL(MINGWCXX, $WITH_MINGWIN, false)
fi
if test "$MINGWCXX" = "false"; then
AC_MSG_ERROR(specified MinGW32 C++ cross-compiler not found. Install it or correct name.)
fi
AC_MSG_CHECKING(whether we are using the MinGW32 cross C++ compiler)
if ! echo "`$MINGWCXX -dumpmachine`" | grep -q mingw32; then
AC_MSG_ERROR(no)
else
AC_MSG_RESULT(yes)
fi
if echo "$WITH_MINGWIN" | $EGREP -q "/"; then
if ! test -x "`echo $WITH_MINGWIN | $SED -e s/g++/strip/`"; then MINGSTRIP=false; else
MINGWSTRIP=$(basename $(echo $WITH_MINGWIN | $SED -e s/g++/strip/)); fi
else
AC_CHECK_TOOL(MINGWSTRIP, `echo $WITH_MINGWIN | $SED -e s/g++/strip/`, false)
fi
if test "$MINGWSTRIP" = "false"; then
AC_MSG_ERROR(MinGW32 binutils needed. Install them.)
fi
AC_LANG_PUSH([C++])
save_CXX=$CXX
save_CXXCPP=$CXXCPP
CXX=$MINGWCXX
CXXCPP="$MINGWCXX -E"
save_CXXFLAGS=$CXXFLAGS
save_CPPFLAGS=$CPPFLAGS
CXXFLAGS="$CXXFLAGS -I$JAVA_HOME/include"
CPPFLAGS="$CPPFLAGS -I$JAVA_HOME/include"
# LIBS contains -lcrypt etc due to teh AC_CHECK_LIBS which obviously
# do not make sense here (and 'd make the check fail)
save_LIBS=$LIBS
LIBS=""
AC_HAVE_LIBRARY(kernel32)
AC_HAVE_LIBRARY(advapi32)
AC_CHECK_HEADER(windows.h, [], [AC_MSG_ERROR([windows.h missing])])
CXXFLAGS=$save_CXXFLAGS
CPPFLAGS=$save_CPPFLAGS
CXX=$save_CXX
CXXCPP=$save_CXXCPP
LIBS=$save_LIBS
AC_LANG_POP([C++])
fi
fi
BUILD_TYPE="$BUILD_TYPE ODK"
else
AC_MSG_RESULT([no])
BUILD_UNOWINREG=NO
fi
AC_SUBST(BUILD_UNOWINREG)
AC_SUBST(MINGWCXX)
AC_SUBST(MINGWSTRIP)
dnl ===================================================================
dnl Check for system stdlibs
dnl ===================================================================
AC_MSG_CHECKING([whether to provide libstdc++/libgcc_s in the installset])
if test -n "$with_system_stdlibs" -o -n "$with_system_libs" && \
test "$with_system_stdlibs" != "no"; then
AC_MSG_RESULT([no])
SYSTEM_STDLIBS=YES
else
AC_MSG_RESULT([yes])
SYSTEM_STDLIBS=NO
fi
AC_SUBST(SYSTEM_STDLIBS)
dnl ===================================================================
dnl Check for system zlib
dnl ===================================================================
if test "$_os" = "Darwin" && test "$with_system_zlib" != "no"; then
with_system_zlib=yes
fi
AC_MSG_CHECKING([which zlib to use])
if test -n "$with_system_zlib" -o -n "$with_system_libs" && \
test "$with_system_zlib" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_ZLIB=YES
AC_CHECK_HEADER(zlib.h, [],
[AC_MSG_ERROR(zlib.h not found. install zlib)], [])
AC_CHECK_LIB(z, deflate, [ ZLIB=-lz ],
[AC_MSG_ERROR(zlib not found or functional)], [])
else
AC_MSG_RESULT([internal])
SYSTEM_ZLIB=NO
BUILD_TYPE="$BUILD_TYPE ZLIB"
fi
AC_SUBST(SYSTEM_ZLIB)
dnl ===================================================================
dnl Check for system jpeg
dnl ===================================================================
AC_MSG_CHECKING([which jpeg to use])
if test -n "$with_system_jpeg" -o -n "$with_system_libs" && \
test "$with_system_jpeg" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_JPEG=YES
AC_CHECK_HEADER(jpeglib.h, [],
[AC_MSG_ERROR(jpeg.h not found. install libjpeg)], [])
AC_CHECK_LIB(jpeg, jpeg_resync_to_restart, [ JPEG3RDLIB=-ljpeg ],
[AC_MSG_CHECKING(jpeg library not found or fuctional)], [])
else
AC_MSG_RESULT([internal])
SYSTEM_JPEG=NO
BUILD_TYPE="$BUILD_TYPE JPEG"
fi
AC_SUBST(SYSTEM_JPEG)
dnl ===================================================================
dnl Check for system expat
dnl ===================================================================
AC_MSG_CHECKING([which expat to use])
if test -n "$with_system_expat" -o -n "$with_system_libs" && \
test "$with_system_expat" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_EXPAT=YES
AC_CHECK_HEADER(expat.h, [],
[AC_MSG_ERROR(expat.h not found. install expat)], [])
AC_CHECK_LIB(expat, XML_ParserCreate, [],
[AC_MSG_RESULT(expat library not found or functional.)], [])
else
AC_MSG_RESULT([internal])
SYSTEM_EXPAT=NO
BUILD_TYPE="$BUILD_TYPE EXPAT"
fi
AC_SUBST(SYSTEM_EXPAT)
dnl ===================================================================
dnl Check for system libwpd
dnl ===================================================================
AC_MSG_CHECKING([which libwpd to use])
if test -n "$with_system_libwpd" -o -n "$with_system_libs" && \
test "$with_system_libwpd" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_LIBWPD=YES
PKG_CHECK_MODULES( LIBWPD, libwpd-0.9 libwpd-stream-0.9 )
else
AC_MSG_RESULT([internal])
SYSTEM_LIBWPD=NO
BUILD_TYPE="$BUILD_TYPE LIBWPD"
fi
AC_SUBST(SYSTEM_LIBWPD)
AC_SUBST(LIBWPD_CFLAGS)
AC_SUBST(LIBWPD_LIBS)
dnl ===================================================================
dnl Check for system cppunit
dnl ===================================================================
AC_MSG_CHECKING([which cppunit to use])
if test -n "$with_system_cppunit" -o -n "$with_system_libs" && \
test "$with_system_cppunit" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_CPPUNIT=YES
# might work for earlier, too but go sure
PKG_CHECK_MODULES( CPPUNIT, cppunit >= 1.12.0 )
else
AC_MSG_RESULT([internal])
SYSTEM_CPPUNIT=NO
BUILD_TYPE="$BUILD_TYPE CPPUNIT"
fi
AC_SUBST(SYSTEM_CPPUNIT)
AC_SUBST(CPPUNIT_CFLAGS)
AC_SUBST(CPPUNIT_LIBS)
dnl ===================================================================
dnl Check whether freetype is available
dnl ===================================================================
if test "$test_freetype" = "yes"; then
AC_MSG_CHECKING([whether freetype is available])
PKG_CHECK_MODULES( FREETYPE, freetype2 >= 2.0 )
fi
AC_SUBST(FREETYPE_CFLAGS)
AC_SUBST(FREETYPE_LIBS)
dnl ===================================================================
dnl Check for system libwps
dnl ===================================================================
AC_MSG_CHECKING([which libwps to use])
if test -n "$with_system_libwps" -o -n "$with_system_libs" && \
test "$with_system_libwps" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_LIBWPS=YES
PKG_CHECK_MODULES( LIBWPS, libwps-0.2 )
else
AC_MSG_RESULT([internal])
SYSTEM_LIBWPS=NO
BUILD_TYPE="$BUILD_TYPE LIBWPS"
fi
AC_SUBST(SYSTEM_LIBWPS)
AC_SUBST(LIBWPS_CFLAGS)
AC_SUBST(LIBWPS_LIBS)
dnl ===================================================================
dnl Check for system libwpg
dnl ===================================================================
AC_MSG_CHECKING([which libwpg to use])
if test -n "$with_system_libwpg" -o -n "$with_system_libs" && \
test "$with_system_libwpg" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_LIBWPG=YES
PKG_CHECK_MODULES( LIBWPG, libwpg-0.2 )
else
AC_MSG_RESULT([internal])
SYSTEM_LIBWPG=NO
BUILD_TYPE="$BUILD_TYPE LIBWPG"
fi
AC_SUBST(SYSTEM_LIBWPG)
AC_SUBST(LIBWPG_CFLAGS)
AC_SUBST(LIBWPG_LIBS)
dnl ===================================================================
dnl Check whether freetype2 supports emboldening
dnl ===================================================================
if test "$test_freetype" = "yes"; then
save_CPPFLAGS="$CPPFLAGS"
save_LDFLAGS="$LDFLAGS"
save_LIBS="$LIBS"
CPPFLAGS="$CPPFLAGS $FREETYPE_CFLAGS"
LDFLAGS="$LDFLAGS $FREETYPE_LIBS"
AC_CHECK_LIB(freetype, FT_GlyphSlot_Embolden,
[USE_FT_EMBOLDEN="YES"], [USE_FT_EMBOLDEN="NO"], [])
LDFLAGS="$save_LDFLAGS"
CPPFLAGS="$save_CPPFLAGS"
LIBS="$save_LIBS"
fi
AC_SUBST(USE_FT_EMBOLDEN)
if test -n "$with_system_libxslt" -o -n "$with_system_libs" && \
test "$with_system_libxslt" != "no"; then
if test -z "$with_system_libxml" -a -z "$with_system_libs" || \
test "$with_system_libxml" = "no"; then
# somehow AC_MSG_WARN won't work...
echo "to prevent incompatibilities between internal libxml2 and libxslt, the office will be
build with system-libxml"
echo "to prevent incompatibilities between internal libxml2 and libxslt, the office will be
build with system-libxml" >> warn
with_system_libxml=yes
fi
fi
if test -n "$with_system_libxml" -o -n "$with_system_libs" && \
test "$with_system_libxml" != "no"; then
if test -z "$with_system_libxslt" -a -z "$with_system_libs" || \
test "$with_system_libxslt" = "no"; then
# somehow AC_MSG_WARN won't work...
echo "to prevent incompatibilities between internal libxslt and libxml2, the office will be
build with system-libxslt"
echo "to prevent incompatibilities between internal libxslt and libxml2, the office will be
build with system-libxslt" >> warn
with_system_libxslt=yes
fi
fi
dnl ===================================================================
dnl Check for system libxslt
dnl ===================================================================
AC_MSG_CHECKING([which libxslt to use])
if test -n "$with_system_libxslt" -o -n "$with_system_libs" -o \
"$_os" = "Darwin" && \
test "$with_system_libxslt" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_LIBXSLT=YES
PKG_CHECK_MODULES_MACHACK(LIBXSLT, xslt-config, libxslt)
dnl Check for xsltproc
AC_PATH_PROG(XSLTPROC, xsltproc, no)
if test "$XSLTPROC" = "no"; then
AC_MSG_ERROR([xsltproc is required])
fi
else
AC_MSG_RESULT([internal])
SYSTEM_LIBXSLT=NO
BUILD_TYPE="$BUILD_TYPE LIBXSLT"
fi
AC_SUBST(SYSTEM_LIBXSLT)
AC_SUBST(LIBXSLT_CFLAGS)
AC_SUBST(LIBXSLT_LIBS)
dnl ===================================================================
dnl Check for system libxml
dnl ===================================================================
AC_MSG_CHECKING([which libxml to use])
if test -n "$with_system_libxml" -o -n "$with_system_libs" -o \
"$_os" = "Darwin" && \
test "$with_system_libxml" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_LIBXML=YES
PKG_CHECK_MODULES_MACHACK(LIBXML, xml2-config, libxml-2.0 >= 2.0)
BUILD_TYPE="$BUILD_TYPE LIBXMLSEC"
else
AC_MSG_RESULT([internal])
SYSTEM_LIBXML=NO
BUILD_TYPE="$BUILD_TYPE LIBXML2 LIBXMLSEC"
fi
AC_SUBST(SYSTEM_LIBXML)
AC_SUBST(LIBXML_CFLAGS)
AC_SUBST(LIBXML_LIBS)
dnl ===================================================================
dnl Check for system python
dnl ===================================================================
AC_MSG_CHECKING([which python to use])
if test "$_os" = "Darwin" && test "$with_system_python" != "no"; then
with_system_python=yes
AC_MSG_RESULT([compiling against MacOSX10.4u.sdk (python version 2.3)])
PYTHON_CFLAGS="-I/Developer/SDKs/MacOSX10.4u.sdk/System/Library/Frameworks/Python.framework/Versions/2.3/include/python2.3"
PYTHON_LIBS="-framework Python"
elif test -n "$with_system_python" -o -n "$with_system_libs" && \
test "$with_system_python" != "no"; then
with_system_python=yes
AC_MSG_RESULT([external])
AM_PATH_PYTHON([2.2])
python_include=`$PYTHON -c "import distutils.sysconfig; print
distutils.sysconfig.get_config_var('INCLUDEPY');"`
python_version=`$PYTHON -c "import distutils.sysconfig; print
distutils.sysconfig.get_config_var('VERSION');"`
PYTHON_CFLAGS="-I$python_include"
PYTHON_LIBS="-lpython$python_version"
fi
if test "$with_system_python" = "yes" ; then
SYSTEM_PYTHON=YES
dnl check if the headers really work:
save_CPPFLAGS="$CPPFLAGS"
CPPFLAGS="$CPPFLAGS $PYTHON_CFLAGS"
AC_CHECK_HEADER(Python.h, [],
[AC_MSG_ERROR(Python headers not found)], [])
CPPFLAGS="$save_CPPFLAGS"
else
SYSTEM_PYTHON=NO
BUILD_TYPE="$BUILD_TYPE PYTHON"
AC_MSG_RESULT([internal])
# Embedded python dies without Home set
if test "z$HOME" = "z"; then
export HOME="";
fi
# bz2 tarball and bzip2 is not standard
if test -z "$BZIP2"; then
AC_PATH_PROG( BZIP2, bzip2)
if test -z "$BZIP2"; then
AC_MSG_ERROR([the internal Python module has a .tar.bz2. You need bzip2])
fi
fi
fi
AC_SUBST(SYSTEM_PYTHON)
AC_SUBST(PYTHON_CFLAGS)
AC_SUBST(PYTHON_LIBS)
HOME=`echo $HOME | $SED 's:\\\\:/:g'`
AC_SUBST(HOME)
dnl ===================================================================
dnl Check for system berkley db
dnl ===================================================================
AC_MSG_CHECKING([which db to use])
if test -n "$with_system_db" -o -n "$with_system_libs" && \
test "$with_system_db" != "no"; then
SYSTEM_DB=YES
AC_MSG_RESULT([external])
for dbver in -5.1 5.1 -5.0 5.0 -5 5 -4.8 4.8 -4.7 4.7 -4 4 ''; do
AC_MSG_CHECKING([for db$dbver/db.h])
for inc_dir in /usr/include /usr/local/include; do
if test -r "$inc_dir/db$dbver/db.h"; then
DB_INCLUDES="$inc_dir/db$dbver"
db_header="db$dbver/db.h"
AC_MSG_RESULT([yes])
break 2
fi
done
AC_MSG_RESULT([no])
done
if test "$DB_INCLUDES" = ""; then
AC_MSG_ERROR(no. install the db4-dev package)
fi
AC_MSG_CHECKING([whether db is at least 4.1])
AC_TRY_RUN([
#include <$db_header>
int main(int argc, char **argv) {
if(DB_VERSION_MAJOR > 4 || (DB_VERSION_MAJOR == 4 && DB_VERSION_MINOR >= 1)) return 0;
else return 1;
}
], [AC_MSG_RESULT([yes])], [AC_MSG_ERROR([no. you need at least db 4.1])])
save_LIBS="$LIBS"
for dbver in -5.1 5.1 -5.0 5.0 -5 5 -4.8 4.8 -4.7 4.7 -4 4 ''; do
AC_CHECK_LIB(db$dbver, db_create, [ DB_LIB="db$dbver"; DB_CPPLIB="db_cxx$dbver";
LIBS="-ldb$dbver $LIBS"; break ])
done
AC_CHECK_FUNC(db_create, [], [ AC_MSG_ERROR([db not installed or functional]) ])
LIBS="$save_LIBS"
SCPDEFS="$SCPDEFS -DSYSTEM_DB"
else
AC_MSG_RESULT([internal])
SYSTEM_DB=NO
BUILD_TYPE="$BUILD_TYPE BERKELEYDB"
fi
AC_SUBST(SYSTEM_DB)
AC_SUBST(DB_VERSION)
AC_SUBST(DB_LIB)
AC_SUBST(DB_CPPLIB)
AC_SUBST(DB_INCLUDES)
AC_SUBST(DB_JAR)
dnl ===================================================================
dnl Check for system lucene
dnl ===================================================================
AC_MSG_CHECKING([which lucene to use])
if test -n "$with_system_lucene" -o -n "$with_system_libs" && \
test "$with_system_lucene" != "no" && test "$with_system_jars" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_LUCENE=YES
if test -z $LUCENE_CORE_JAR; then
AC_CHECK_FILE(/usr/share/java/lucene-core-2.3.jar,
[ LUCENE_CORE_JAR=/usr/share/java/lucene-core-2.3.jar ],
[
AC_CHECK_FILE(/usr/share/java/lucene-core.jar,
[ LUCENE_CORE_JAR=/usr/share/java/lucene-core.jar ],
[ AC_CHECK_FILE(/usr/share/java/lucene.jar,
[ LUCENE_CORE_JAR=/usr/share/java/lucene.jar ],
[ AC_MSG_ERROR(lucene-core.jar replacement not found)]
)
]
)
]
)
else
AC_CHECK_FILE($LUCENE_CORE_JAR, [],
[AC_MSG_ERROR(lucene-core.jar not found.)], [])
fi
if test -z $LUCENE_ANALYZERS_JAR; then
AC_CHECK_FILE(/usr/share/java/lucene-analyzers-2.3.jar,
[ LUCENE_ANALYZERS_JAR=/usr/share/java/lucene-analyzers-2.3.jar ],
[
AC_CHECK_FILE(/usr/share/java/lucene-contrib/lucene-analyzers.jar,
[ LUCENE_ANALYZERS_JAR=/usr/share/java/lucene-contrib/lucene-analyzers.jar ],
[ AC_MSG_ERROR(lucene-analyzers.jar replacement not found.)]
)
]
)
else
AC_CHECK_FILE($LUCENE_CORE_JAR, [],
[ AC_MSG_ERROR(lucene-analyzers.jar not found.)], [])
fi
AC_MSG_CHECKING([whether lucene is version 2.x])
export LUCENE_CORE_JAR
if $PERL -e 'use Archive::Zip;
my $file = "$ENV{'LUCENE_CORE_JAR'}";
my $zip = Archive::Zip->new( $file );
my $mf = $zip->contents ( "META-INF/MANIFEST.MF" );
if ( $mf =~ m/Specification-Version: 2.*/ ) {
exit 0;
} else {
exit 1;
}'; then
AC_MSG_RESULT([yes])
else
AC_MSG_ERROR([no, you need lucene 2])
fi
else
AC_MSG_RESULT([internal])
SYSTEM_LUCENE=NO
BUILD_TYPE="$BUILD_TYPE LUCENE"
fi
AC_SUBST(SYSTEM_LUCENE)
AC_SUBST(LUCENE_CORE_JAR)
AC_SUBST(LUCENE_ANALYZERS_JAR)
AC_MSG_CHECKING([whether to build the MySQL Connector extension])
if test -n "$enable_ext_mysql_connector" -a "$enable_ext_mysql_connector" != "no"; then
AC_MSG_RESULT([yes])
ENABLE_MYSQLC=YES
AC_MSG_CHECKING([for mysqlc module])
if test -d mysqlc; then
AC_MSG_RESULT([OK])
else
AC_MSG_ERROR([not existing. get it (did you get the -extensions tarball?)])
fi
BUILD_TYPE="$BUILD_TYPE MYSQLC"
else
AC_MSG_RESULT([no])
ENABLE_MYSQLC=NO
fi
AC_SUBST(ENABLE_MYSQLC)
if test "$ENABLE_MYSQLC" = "YES"; then
SCPDEFS="$SCPDEFS -DWITH_EXTENSION_MYSQLC"
dnl ===================================================================
dnl Check for system MySQL
dnl ===================================================================
AC_MSG_CHECKING([for mysql pre-requisites])
if test -n "$with_system_mysql" -o -n "$with_system_libs" && \
test "$with_system_mysql" != "no" && test "$with_system_libs" != "no"; then
AC_MSG_RESULT([external MySQL])
SYSTEM_MYSQL=YES
AC_PATH_PROG( MYSQLCONFIG, mysql_config)
AC_MSG_CHECKING([MySQL version])
MYSQL_VERSION=`$MYSQLCONFIG --version`
MYSQL_MAJOR=`$MYSQLCONFIG --version | cut -d"." -f1`
if test "$MYSQL_MAJOR" -ge "5"; then
AC_MSG_RESULT([OK])
else
AC_MSG_ERROR([too old, use 5.0.x or 5.1.x])
fi
AC_MSG_CHECKING([for MySQL Client library])
MYSQL_INC=`$MYSQLCONFIG --include`
MYSQL_LIB=`$MYSQLCONFIG --libs`
MYSQL_DEFINES=`$MYSQLCONFIG --cflags | $SED -e s,$MYSQL_INC,,`
AC_MSG_RESULT([includes $MYSQL_INC, libraries $MYSQL_LIB])
else
SYSTEM_MYSQL=NO
if test -n "$with_libmysql_path"; then
AC_MSG_RESULT([external Connector/C (libmysql)])
LIBMYSQL=libmysql.so
if test "$_os" = "Darwin"; then
LIBMYSQL=libmysql.dylib
elif test "$_os" = "WINNT"; then
LIBMYSQL=libmysql.dll
fi
AC_MSG_CHECKING([for $LIBMYSQL])
if test -e "$with_libmysql_path/lib/$LIBMYSQL"; then
AC_MSG_RESULT([found.])
LIBMYSQL_PATH=$with_libmysql_path
else
AC_MSG_ERROR([not found. Please specify proper path in --with-libmysql-path.])
fi
else
AC_MSG_ERROR([not given. Please specify either --with-system-mysql or --with-libmysql-path])
fi
fi
AC_SUBST(SYSTEM_MYSQL)
AC_SUBST(MYSQL_INC)
AC_SUBST(MYSQL_LIB)
AC_SUBST(MYSQL_DEFINES)
AC_SUBST(LIBMYSQL_PATH)
AC_LANG_PUSH([C++])
dnl ===================================================================
dnl Check for system MySQL C++ Connector
dnl ===================================================================
# FIXME!
# who thought this too-generic cppconn dir was a good idea?
AC_MSG_CHECKING([MySQL Connector/C++])
if test -n "$with_system_mysql_cppconn" -o -n "$with_system_libs" && \
test "$with_system_mysql_cppconn" != "no" && test "$with_system_libs" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_MYSQL_CPPCONN=YES
AC_LANG_PUSH([C++])
AC_CHECK_HEADER(mysql_driver.h, [],
[AC_MSG_ERROR(mysql_driver.h not found. install MySQL C++ Connectivity)], [])
AC_CHECK_LIB(mysqlcppconn, main, [],
[AC_MSG_ERROR(MySQL C++ Connectivity lib not found or functional)], [])
AC_MSG_CHECKING([version])
AC_TRY_RUN([
#include <mysql_driver.h>
int main(int argc, char **argv) {
sql::Driver *driver;
driver = get_driver_instance();
if (driver->getMajorVersion() > 1 || \
(driver->getMajorVersion() == 1 && driver->getMinorVersion() > 0) || \
(driver->getMajorVersion() == 1 && driver->getMinorVersion() == 0 &&
driver->getPatchVersion() >= 6))
return 0;
else
return 1;
}
], [AC_MSG_RESULT(OK)], [AC_MSG_ERROR([not suitable, we need >= 1.0.6])])
AC_LANG_POP([C++])
else
AC_MSG_RESULT([internal])
AC_MSG_CHECKING([for mysqlcppconn module])
if test -d mysqlcppconn; then
AC_MSG_RESULT([OK])
else
AC_MSG_ERROR([not existing. get it (did you get the -extensions tarball?)])
fi
BUILD_TYPE="$BUILD_TYPE MYSQLCPPCONN"
SYSTEM_MYSQL_CPPCONN=NO
fi
AC_LANG_POP([C++])
AC_SUBST(SYSTEM_MYSQL_CPPCONN)
fi
dnl ===================================================================
dnl Check for system hsqldb
dnl ===================================================================
AC_MSG_CHECKING([which hsqldb to use])
if test -n "$with_system_hsqldb" -o -n "$with_system_libs" && \
test "$with_system_hsqldb" != "no" && test "$with_system_jars" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_HSQLDB=YES
if test -z $HSQLDB_JAR; then
HSQLDB_JAR=/usr/share/java/hsqldb.jar
fi
AC_CHECK_FILE($HSQLDB_JAR, [],
[AC_MSG_ERROR(hsqldb.jar not found.)], [])
AC_MSG_CHECKING([whether hsqldb is 1.8.0.x])
export HSQLDB_JAR
if $PERL -e 'use Archive::Zip;
my $file = "$ENV{'HSQLDB_JAR'}";
my $zip = Archive::Zip->new( $file );
my $mf = $zip->contents ( "META-INF/MANIFEST.MF" );
if ( $mf =~ m/Specification-Version: 1.8.*/ ) {
push @l, split(/\n/, $mf);
foreach my $line (@l) {
if ($line =~ m/Specification-Version:/) {
($t, $version) = split (/:/,$line);
$version =~ s/^\s//;
($a, $b, $c, $d) = split (/\./,$version);
if ($c == "0" && $d > "8") {
exit 0;
} else {
exit 1;
}
}
}
} else {
exit 1;
}'; then
AC_MSG_RESULT([yes])
else
AC_MSG_ERROR([no, you need hsqldb >= 1.8.0.9 but < 1.8.1])
fi
else
AC_MSG_RESULT([internal])
SYSTEM_HSQLDB=NO
BUILD_TYPE="$BUILD_TYPE HSQLDB"
fi
AC_SUBST(SYSTEM_HSQLDB)
AC_SUBST(HSQLDB_JAR)
dnl ===================================================================
dnl Check for system beanshell
dnl ===================================================================
AC_MSG_CHECKING([which beanshell to use])
if test -n "$with_system_beanshell" -o -n "$with_system_libs" && \
test "$with_system_beanshell" != "no" && test "$with_system_jars" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_BSH=YES
if test -z $BSH_JAR; then
BSH_JAR=/usr/share/java/bsh.jar
fi
AC_CHECK_FILE($BSH_JAR, [],
[AC_MSG_ERROR(bsh.jar not found.)], [])
else
AC_MSG_RESULT([internal])
SYSTEM_BSH=NO
BUILD_TYPE="$BUILD_TYPE BSH"
fi
AC_SUBST(SYSTEM_BSH)
AC_SUBST(BSH_JAR)
dnl ===================================================================
dnl Check for system saxon
dnl ===================================================================
AC_MSG_CHECKING([which saxon to use])
if test -n "$with_system_saxon" -o -n "$with_system_libs" && \
test "$with_system_saxon" != "no" && test "$with_system_jars" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_SAXON=YES
if test -z $SAXON_JAR; then
AC_CHECK_FILE(/usr/share/java/saxon9.jar,
[ SAXON_JAR=/usr/share/java/saxon9.jar ],
[
AC_CHECK_FILE(/usr/share/java/saxon.jar,
[ SAXON_JAR=/usr/share/java/saxon.jar ],
[ AC_CHECK_FILE(/usr/share/java/saxon9.jar,
[ SAXON_JAR=/usr/share/java/saxon9.jar ],
[ AC_MSG_ERROR(saxon.jar replacement not found)]
)
]
)
]
)
else
AC_CHECK_FILE($SAXON_JAR, [],
[AC_MSG_ERROR(saxon.jar replacement not found.)], [])
fi
if test -n "$SERIALIZER_JAR"; then
AC_CHECK_FILE($SERIALIZER_JAR, [],
[AC_MSG_ERROR(serializer.jar not found.)], [])
AC_SUBST(SERIALIZER_JAR)
fi
dnl Saxon comes in two practically available versions, the out-of-date saxonb which
dnl supports the java extensions that LibO uses, and the up-to-date saxon he
dnl "home edition" version, which is crippled to not support those java extensions.
dnl And as an aside the he one also needs to be tweaked to include
dnl a META-INF/services to broadcast that it supports the jaxp transform factory
AC_MSG_CHECKING([if saxon works])
cat > saxontest.java <<_ACEOF
[import javax.xml.transform.TransformerFactory;
import javax.xml.transform.Transformer;
import javax.xml.transform.stream.StreamSource;
import java.io.*;
import net.sf.saxon.FeatureKeys;
class saxontest {
public static void main(String[] args) {
System.setProperty("javax.xml.transform.TransformerFactory",
"net.sf.saxon.TransformerFactoryImpl");
try {
TransformerFactory tfactory = TransformerFactory.newInstance();
// some external saxons (Debian, Ubuntu, ...) have this disabled
// per default
tfactory.setAttribute(FeatureKeys.ALLOW_EXTERNAL_FUNCTIONS, new Boolean(true));
System.out.println("TransformerFactory is" +
tfactory.getClass().getName());
Transformer transformer = tfactory.newTransformer(
new StreamSource(new File(args[0])));
} catch(Exception e){
e.printStackTrace(System.err);
System.exit(-1);
}
System.exit(0);
}
}
]
_ACEOF
cat > saxontest.xsl<<_ACEOF
[<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="2.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform";>
<xsl:template match="/">
<xsl:value-of select="math:sqrt(1)" xmlns:math="java:java.lang.Math"/>
</xsl:template>
</xsl:stylesheet>
]
_ACEOF
javac_cmd="$JAVACOMPILER -cp $SAXON_JAR saxontest.java 1>&2"
AC_TRY_EVAL(javac_cmd)
if test $? = 0 && test -f ./saxontest.class ; then
java_cmd="$JAVAINTERPRETER -cp $SAXON_JAR:. saxontest saxontest.xsl 1>&2"
AC_TRY_EVAL(java_cmd)
if test $? = 0; then
AC_MSG_RESULT([yes])
else
cat saxontest.java >&5
AC_MSG_RESULT([no])
AC_MSG_ERROR([Non-functional saxon jar, e.g. crippled saxon-he instead of saxonb])
fi
else
AC_MSG_RESULT([no])
cat saxontest.java >&5
AC_MSG_ERROR([saxontest could not be compiled, non-functional saxon jar])
fi
else
AC_MSG_RESULT([internal])
SYSTEM_SAXON=NO
NEED_SAXON=TRUE
fi
AC_SUBST(SYSTEM_SAXON)
AC_SUBST(SAXON_JAR)
if test -n "$NEED_SAXON"; then
BUILD_TYPE="$BUILD_TYPE SAXON"
fi
dnl ===================================================================
dnl Check for system curl
dnl ===================================================================
if test "$_os" = "Darwin" && test "$with_system_curl" != "no"; then
with_system_curl=yes
fi
AC_MSG_CHECKING([which curl to use])
if test -n "$with_system_curl" -o -n "$with_system_libs" && \
test "$with_system_curl" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_CURL=YES
AC_PATH_PROG( CURLCONFIG, curl-config)
if test -z "$CURLCONFIG"; then
AC_MSG_ERROR([install curl to run this script])
fi
# check curl version
AC_MSG_CHECKING([whether curl is >= 7.13.1])
if test "`$CURLCONFIG --version | $AWK -F' ' '{print $2}' | $AWK -F. '{ print $1 }'`" -gt "7" -a
\
"`$CURLCONFIG --version | $AWK -F' ' '{print $2}' | $AWK -F. '{ print $2 }'`" -gt "13" -a \
"`$CURLCONFIG --version | $AWK -F' ' '{print $2}' | $AWK -F. '{ print $3 }'`" -gt "1"; then
AC_MSG_ERROR([no, you need at least curl 7.13,1])
else
AC_MSG_RESULT([yes])
fi
CURL_LIBS=`$CURLCONFIG --libs`
CURL_CFLAGS=`$CURLCONFIG --cflags`
else
AC_MSG_RESULT([internal])
SYSTEM_CURL=NO
BUILD_TYPE="$BUILD_TYPE CURL"
fi
AC_SUBST(SYSTEM_CURL)
AC_SUBST(CURL_CFLAGS)
AC_SUBST(CURL_LIBS)
dnl ===================================================================
dnl Check for system mdds
dnl ===================================================================
AC_MSG_CHECKING([which mdds to use])
if test -n "$with_system_mdds" -o -n "$with_system_headers" && \
test "$with_system_mdds" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_MDDS=YES
AC_LANG_PUSH([C++])
AC_CHECK_HEADER(mdds/flat_segment_tree.hpp, [],
[AC_MSG_ERROR(mdds/flat_segment_tree.hpp not found. install mdds)], [])
AC_LANG_POP([C++])
else
AC_MSG_RESULT([internal])
BUILD_TYPE="$BUILD_TYPE MDDS"
SYSTEM_MDDS=NO
fi
AC_SUBST(SYSTEM_MDDS)
dnl ===================================================================
dnl Check for system boost
dnl ===================================================================
AC_MSG_CHECKING([which boost to use])
if test -n "$with_system_boost" -o -n "$with_system_headers" && \
test "$with_system_boost" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_BOOST=YES
AC_LANG_PUSH([C++])
AC_CHECK_HEADER(boost/shared_ptr.hpp, [],
[AC_MSG_ERROR(boost/shared_ptr.hpp not found. install boost)], [])
AC_CHECK_HEADER(boost/spirit/include/classic_core.hpp, [],
[AC_MSG_ERROR(boost/spirit/include/classic_core.hpp not found. install boost >= 1.36)], [])
AC_CHECK_HEADER(boost/function.hpp, [],
[AC_MSG_ERROR(boost/function.hpp not found. install boost)], [])
save_CXXFLAGS=$CXXFLAGS
CXXFLAGS="$CXXFLAGS -fno-exceptions"
AC_MSG_CHECKING([whether boost/function.hpp compiles with -fno-exceptions])
AC_TRY_COMPILE([#include <boost/function.hpp>
], [],
ac_cv_cxx_boost_no_exceptons_broken=no, ac_cv_cxx_boost_no_exceptons_broken=yes)
if test "$ac_cv_cxx_boost_no_exceptons_broken" = "yes"; then
AC_MSG_ERROR([no, see https://bugzilla.redhat.com/show_bug.cgi?id=477131])
else
AC_MSG_RESULT([yes])
fi
CXXFLAGS=$save_CXXFLAGS
AC_LANG_POP([C++])
else
AC_MSG_RESULT([internal])
BUILD_TYPE="$BUILD_TYPE BOOST"
SYSTEM_BOOST=NO
fi
AC_SUBST(SYSTEM_BOOST)
dnl ===================================================================
dnl Check for system vigra
dnl ===================================================================
AC_MSG_CHECKING([which vigra to use])
if test -n "$with_system_vigra" -o -n "$with_system_headers" && \
test "$with_system_vigra" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_VIGRA=YES
AC_LANG_PUSH([C++])
AC_CHECK_HEADER(vigra/copyimage.hxx, [],
[AC_MSG_ERROR(vigra/copyimage.hxx not found. install vigra)], [])
AC_LANG_POP([C++])
else
AC_MSG_RESULT([internal])
BUILD_TYPE="$BUILD_TYPE VIGRA"
SYSTEM_VIGRA=NO
fi
AC_SUBST(SYSTEM_VIGRA)
dnl ===================================================================
dnl Check for system odbc
dnl ===================================================================
AC_MSG_CHECKING([which odbc headers to use])
if test -n "$with_system_odbc_headers" -o -n "$with_system_headers" && \
test "$with_system_odbc_headers" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_ODBC_HEADERS=YES
AC_CHECK_HEADER(sqlext.h, [],
[AC_MSG_ERROR(odbc not found. install odbc)], [])
else
AC_MSG_RESULT([internal])
SYSTEM_ODBC_HEADERS=NO
BUILD_TYPE="$BUILD_TYPE UNIXODBC"
fi
AC_SUBST(SYSTEM_ODBC_HEADERS)
AC_MSG_CHECKING([whether to enable build of Mozilla/Mozilla NSS-using components])
if test "$enable_mozilla" = "no"; then
AC_MSG_RESULT([no])
WITH_MOZILLA=NO
ENABLE_NSS_MODULE=NO
else
AC_MSG_RESULT([yes])
WITH_MOZILLA=YES
fi
AC_SUBST(WITH_MOZILLA)
AC_MSG_CHECKING([whether to build Mozilla addressbook connectivity])
if test "$enable_mozilla" = "no"; then
AC_MSG_RESULT([no])
elif test "$with_system_mozilla" = "yes"; then
AC_MSG_RESULT([no, not possible with system-mozilla])
else
AC_MSG_RESULT([yes])
fi
AC_MSG_CHECKING([whether to build XML Security support])
if test "$enable_mozilla" = "no"; then
AC_MSG_RESULT([no, since Mozilla (NSS) disabled but needed])
else
AC_MSG_RESULT([yes])
fi
AC_MSG_CHECKING([whether to build LDAP configuration backend])
if test -z "$enable_ldap" || test "$enable_ldap" = "yes"; then
if test "$enable_mozilla" = "yes" || test "$with_openldap" = "yes"; then
AC_MSG_RESULT([yes])
WITH_LDAP=YES
else
AC_MSG_RESULT([no. Either Mozilla or OpenLDAP needed])
WITH_LDAP=NO
fi
else
AC_MSG_RESULT([no])
WITH_LDAP=NO
fi
if test "$WITH_LDAP" = "YES"; then
dnl ===================================================================
dnl Test whether we want to use the Mozilla or the OpenLDAP LDAP SDK
dnl ===================================================================
AC_MSG_CHECKING([which LDAP SDK to use])
if test -n "$with_openldap" && test "$with_openldap" != "no"; then
AC_MSG_RESULT([OpenLDAP])
WITH_OPENLDAP=YES
AC_CHECK_HEADERS(ldap.h, [],
[AC_MSG_ERROR(ldap.h not found. install openldap libs)], [])
AC_CHECK_LIB(ldap, ldap_simple_bind_s, [],
[AC_MSG_ERROR(openldap lib not found or functional)], [])
# rumours say that OpenLDAP doesn't have that function. I looked and
# it has it. Test for it to be sure
AC_CHECK_LIB(ldap, ldap_set_option, [],
[AC_MSG_ERROR(openldap lib not found or functional)], [])
else
AC_MSG_RESULT([Netscape/Mozilla])
# TODO. Actually do a sanity check and check for
# LDAP_OPT_SIZELIMIT and LDAP_X_OPT_CONNECT_TIMEOUT
WITH_OPENLDAP=NO
fi
fi
AC_SUBST(WITH_LDAP)
AC_SUBST(WITH_OPENLDAP)
dnl ===================================================================
dnl Check for system mozilla
dnl ===================================================================
AC_MSG_CHECKING([which mozilla to use])
if test -n "$with_system_mozilla" && test "$with_system_mozilla" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_MOZILLA=YES
ENABLE_NSS_MODULE=NO
enable_nss_module=no
AC_MSG_CHECKING([which Mozilla flavour to use])
if test -n "$with_system_mozilla" && test "$with_system_mozilla" = "libxul"; then
MOZ_FLAVOUR=libxul
elif test -n "$with_system_mozilla" && test "$with_system_mozilla" = "xulrunner"; then
MOZ_FLAVOUR=xulrunner
elif test -n "$with_system_mozilla" && test "$with_system_mozilla" = "seamonkey"; then
MOZ_FLAVOUR=seamonkey
elif test -n "$with_system_mozilla" && test "$with_system_mozilla" = "firefox"; then
MOZ_FLAVOUR=firefox
elif test -n "$with_system_mozilla" && test "$with_system_mozilla" = "mozilla"; then
MOZ_FLAVOUR=mozilla
else
MOZ_FLAVOUR=libxul
fi
tmp=`echo $MOZ_FLAVOUR | $PERL -e 'print ucfirst(<STDIN>);'`
AC_MSG_RESULT($tmp)
PKG_CHECK_MODULES( MOZ_NSS, nss, STANDALONENSS="TRUE", STANDALONENSS="" )
if test -z "$STANDALONENSS"; then
PKG_CHECK_MODULES( MOZ_NSS, $MOZ_FLAVOUR-nss )
else
NSS_LIB="-L`$PKG_CONFIG --variable=libdir nss`"
AC_SUBST(NSS_LIB)
fi
if $PKG_CONFIG --exists nspr ; then
PKG_CHECK_MODULES( MOZ_NSPR, nspr )
NSPR_LIB="-L`$PKG_CONFIG --variable=libdir nspr`"
AC_SUBST(NSPR_LIB)
else
PKG_CHECK_MODULES( MOZ_NSPR, $MOZ_FLAVOUR-nspr )
fi
if test "$MOZ_FLAVOUR" != "libxul"; then
PKG_CHECK_MODULES( MOZILLAXPCOM, $MOZ_FLAVOUR-xpcom, HASXPCOM="TRUE", HASXPCOM="" )
MOZ_INC=`$PKG_CONFIG --variable=includedir $MOZ_FLAVOUR-xpcom`
MOZ_LIB=`$PKG_CONFIG --variable=libdir $MOZ_FLAVOUR-xpcom`
fi
if test -z "$HASXPCOM"; then
PKG_CHECK_MODULES( MOZILLAXPCOM, libxul )
MOZ_INC=`$PKG_CONFIG --variable=includedir libxul`
MOZ_LIB=`$PKG_CONFIG --variable=libdir libxul`
if ! test -e "$MOZ_LIB/libxul.so"; then
MOZ_LIB=`$PKG_CONFIG --variable=sdkdir libxul`
if test -e "$MOZ_LIB/sdk/lib/libxul.so"; then
MOZ_LIB="$MOZ_LIB/sdk/lib"
fi
fi
fi
save_CPPFLAGS="$CPPFLAGS"
save_LDFLAGS="$LDFLAGS"
save_LIBS="$LIBS"
CPPFLAGS="$CPPFLAGS $MOZ_NSS_CFLAGS"
LDFLAGS="$LDFLAGS $MOZ_NSS_LIBS"
AC_CHECK_LIB(nss3, PK11_GetCertFromPrivateKey, [],
[AC_MSG_ERROR(PK11_GetCertFromPrivateKey missing but needed.
See https://bugzilla.mozilla.org/show_bug.cgi?id=262274.
Fixed since nss 3.9.3 (contained by e.g. mozilla >= 1.7.5))], [])
LDFLAGS="$save_LDFLAGS"
CPPFLAGS="$save_CPPFLAGS"
LIBS="$save_LIBS"
MOZ_LIB_XPCOM=$MOZILLAXPCOM_LIBS
if test "$WITH_LDAP" != "NO" && test "$WITH_OPENLDAP" != "YES"; then
AC_MSG_CHECKING([whether $tmp was compiled with --enable-ldap])
if test -d "$MOZ_INC/ldap"; then
AC_MSG_RESULT([yes])
MOZ_LDAP_CFLAGS="-I$MOZ_INC"
else
AC_MSG_ERROR([no.
Could not find LDAP header include files in $MOZ_INC/ldap.
Please recompile $tmp with --enable-ldap or use --with-openldap.])
fi
fi
#e.g. http://fedoraproject.org/wiki/Releases/FeatureXULRunnerAPIChanges
#the plugin pkg-config etc. reverts to "mozilla-plugin" with libxul
if test "$MOZ_FLAVOUR" = "libxul"; then
MOZ_FLAVOUR="mozilla"
fi
elif test "$enable_mozilla" = "no"; then
AC_MSG_RESULT([none])
WITH_MOZILLA=NO
ENABLE_NSS_MODULE=NO
enable_nss_module=no
else
AC_MSG_RESULT([internal])
SYSTEM_MOZILLA=NO
BUILD_TYPE="$BUILD_TYPE MOZ"
if test -z "$with_mozilla_version"; then
MOZILLA_VERSION=
else
AC_MSG_CHECKING([which mozilla version to build])
MOZILLA_VERSION=$with_mozilla_version
enable_build_mozilla=1
AC_MSG_RESULT([$MOZILLA_VERSION])
fi
AC_SUBST(MOZILLA_VERSION)
AC_MSG_CHECKING([for toolkit mozilla should use])
if test -z "$with_mozilla_toolkit"; then
if test "$_os" != "WINNT" ; then
if test "$_os" = "Darwin" ; then
MOZILLA_TOOLKIT=mac
AC_MSG_RESULT([mac])
else
MOZILLA_TOOLKIT=gtk2
AC_MSG_RESULT([gtk2])
fi
fi
else
MOZILLA_TOOLKIT=$with_mozilla_toolkit
enable_build_mozilla=1
AC_MSG_RESULT([$MOZILLA_TOOLKIT])
fi
#if test "$_os" = "Darwin" && test "$MOZILLA_TOOLKIT" != "gtk2"; then
# #only gtk2 toolkit supported - xlib or cocoa nees glib1 and libIDL1 - the latter is not
# #available using fink, mac (carbon) doesn't work because xcode installs conflicting headers
# AC_MSG_ERROR([Only gtk2 toolkit supported on Mac, sorry.])
#fi
AC_SUBST(MOZILLA_TOOLKIT)
# default to enabling build mozilla
if test "$enable_build_mozilla" != "no"; then
enable_build_mozilla=yes
else
enable_build_mozilla=
fi
AC_MSG_CHECKING([whether to build Mozilla/SeaMonkey])
if test -n "$enable_build_mozilla"; then
BUILD_MOZAB="TRUE"
AC_MSG_RESULT([yes])
else
BUILD_MOZAB=""
AC_MSG_RESULT([no])
fi
AC_MSG_CHECKING([whether to build provided NSS module])
if test "$enable_nss_module" != "no"; then
ENABLE_NSS_MODULE="YES"
BUILD_TYPE="$BUILD_TYPE NSS"
AC_MSG_RESULT([yes])
if test "$_os" = "WINNT"; then
AC_MSG_CHECKING([for Mozilla build tooling])
if test -z "$MOZILLABUILD" ; then
AC_MSG_ERROR([Mozilla build tooling not found.
Use the --with-mozilla-build option after installling the tools obtained
from http://ftp.mozilla.org/pub/mozilla.org/mozilla/libraries/win32])
else
if test \( "$WITH_MINGWIN" = "yes" \) ; then
if test ! -d "$MOZILLABUILD" ; then
AC_MSG_ERROR([Mozilla build tooling incomplete!])
else
AC_MSG_RESULT([ok])
fi
else
if test ! -d "$MOZILLABUILD/moztools" \
-o ! -d "$MOZILLABUILD/msys" ; then
AC_MSG_ERROR([Mozilla build tooling incomplete!])
else
AC_MSG_RESULT([ok])
fi
fi
fi
fi
else
ENABLE_NSS_MODULE="NO"
AC_MSG_RESULT([no])
fi
if test "$BUILD_MOZAB" = "TRUE"; then
if test "$_os" = "WINNT"; then
if test "$WITH_MINGWIN" != "yes"; then
# compiling with MSVC. Only supported platform here is MSVS2005 at the moment.
if test "$MSVSVER" != "2005"; then
AC_MSG_ERROR([Building SeaMonkey is supported with Microsoft Visual Studio 2005 only.])
fi
else
AC_MSG_WARN([Building SeaMonkey with mingwin is not tested, and likely to break.])
echo "Building SeaMonkey with MinGW is not tested, and likely to break." >> warn
fi
fi
if test -z "$MOZILLA_VERSION"; then
MOZILLA_VERSION=1.1.14
fi
MOZILLA_SOURCE_VERSION="seamonkey-${MOZILLA_VERSION}.source"
MOZILLA_FETCH_FILE=`grep $MOZILLA_SOURCE_VERSION ooo.lst`
AC_MSG_CHECKING([for mozilla sources])
if test -z "$MOZILLA_FETCH_FILE"; then
AC_MSG_RESULT([not found])
HAVE_MOZILLA_TARBALL=n
else
AC_MSG_CHECKING([for $MOZILLA_FETCH_FILE])
if test ! -e "$TARFILE_LOCATION/$MOZILLA_FETCH_FILE"; then
if test -z "$DO_FETCH"; then
AC_MSG_RESULT([will be fetched])
HAVE_MOZILLA_TARBALL=y
else
AC_MSG_RESULT([not found])
HAVE_MOZILLA_TARBALL=n
fi
else
AC_MSG_RESULT([found])
HAVE_MOZILLA_TARBALL=y
fi
fi
if test "$HAVE_MOZILLA_TARBALL" != "y"; then
AC_MSG_ERROR([Mozilla/SeaMonkey source archive not found.
Use "./fetch_tarballs.sh ooo.lst" to download.])
fi
if test "$_os" = "WINNT"; then
AC_MSG_CHECKING([for moztools binaries])
if test ! -e "$TARFILE_LOCATION/vc8-moztools.zip" ; then
AC_MSG_ERROR([The following file is missing in $TARFILE_LOCATION: vc8-moztools.zip
(from ftp://ftp.mozilla.org/pub/mozilla.org/mozilla/libraries/win32/historic/vc8/)])
else
AC_MSG_RESULT([ok])
fi
elif test "$_os" = "Darwin"; then
if test "$MOZILLA_TOOLKIT" = "gtk2"; then
AC_MSG_NOTICE([checking whether mozilla can be built...])
PKG_CHECK_MODULES(MOZGTK2, gtk+-2.0 >= 2.4 libIDL-2.0 >= 0.8, AC_MSG_NOTICE([OK - can
build mozilla]), AC_MSG_ERROR([Prerequisites to build mozilla not met. Either use the precompiled
mozilla binaries or install the missing packages]))
else
PKG_CHECK_MODULES(MOZLIBREQ, libIDL-2.0 >= 0.6.3, MOZIDL="TRUE", MOZIDL="")
if test -z "$MOZIDL"; then
AC_MSG_ERROR([libIDL 0.6.3 or newer is needed to build mozilla with mac toolkit.])
fi
fi
else
# Generic Unix/Linux section
if test "$MOZILLA_TOOLKIT" = "gtk2"; then
PKG_CHECK_MODULES(MOZLIBREQ, gtk+-2.0, MOZGTK="TRUE", MOZGTK="")
if test -z "$MOZGTK"; then
AC_MSG_ERROR([GTK2 is needed to build mozilla.])
fi
PKG_CHECK_MODULES(MOZLIBREQ, libIDL-2.0 >= 0.8.0, MOZIDL="TRUE", MOZIDL="")
if test -z "$MOZIDL"; then
AC_MSG_ERROR([libIDL >= 0.8.0 is needed when using GTK2 to build mozilla.])
fi
else
PKG_CHECK_MODULES(MOZLIBREQ, gtk+ >= 1.2.3, MOZGTK="TRUE", MOZGTK="")
if test -z "$MOZGTK"; then
AC_MSG_ERROR([gtk 1.2 is needed when not using GTK2 to build mozilla.])
fi
PKG_CHECK_MODULES(MOZLIBREQ, libidl >= 0.6.3 libidl <= 0.6.8, MOZIDL="TRUE", MOZIDL="")
if test -z "$MOZIDL"; then
AC_MSG_ERROR([libIDL 0.6.3 - 0.6.8 is needed when not using GTK2 to build mozilla.])
fi
fi
fi
fi
AC_SUBST(BUILD_MOZAB)
fi
AC_SUBST(ENABLE_NSS_MODULE)
AC_SUBST(MOZILLABUILD)
AC_SUBST(SYSTEM_MOZILLA)
AC_SUBST(MOZ_FLAVOUR)
AC_SUBST(MOZ_INC)
AC_SUBST(MOZ_LIB)
AC_SUBST(MOZ_LIB_XPCOM)
AC_SUBST(MOZ_NSPR_CFLAGS)
AC_SUBST(MOZ_NSS_CFLAGS)
AC_SUBST(MOZ_LDAP_CFLAGS)
dnl ===================================================================
dnl Check for system sane
dnl ===================================================================
AC_MSG_CHECKING([which sane header to use])
if test -n "$with_system_sane_header" -o -n "$with_system_headers" && \
test "$with_system_sane_header" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_SANE_HEADER=YES
AC_CHECK_HEADER(sane/sane.h, [],
[AC_MSG_ERROR(sane not found. install sane)], [])
else
AC_MSG_RESULT([internal])
SYSTEM_SANE_HEADER=NO
BUILD_TYPE="$BUILD_TYPE SANE"
fi
AC_SUBST(SYSTEM_SANE_HEADER)
dnl ===================================================================
dnl Check for system icu
dnl ===================================================================
AC_MSG_CHECKING([which icu to use])
if test -n "$with_system_icu" -o -n "$with_system_libs" && \
test "$with_system_icu" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_ICU=YES
AC_LANG_PUSH([C++])
AC_MSG_CHECKING([for unicode/rbbi.h])
AC_TRY_CPP(unicode/rbbi.h, AC_MSG_RESULT([checked.]), AC_MSG_ERROR([icu headers not found.]))
AC_PATH_PROG(SYSTEM_GENBRK, genbrk, [], [$PATH:/usr/sbin:/sbin:/usr/local/bin])
if test -z "$SYSTEM_GENBRK"; then
AC_MSG_ERROR([\"genbrk\" not found in \$PATH, install the icu development tool \"genbrk"\])
fi
AC_PATH_PROG(SYSTEM_GENCCODE, genccode, [], [$PATH:/usr/sbin:/sbin:/usr/local/sbin])
if test -z "$SYSTEM_GENCCODE"; then
AC_MSG_ERROR([\"genccode\" not found in \$PATH, install the icu development tool
\"genccode"\])
fi
AC_PATH_PROG(SYSTEM_GENCMN, gencmn, [], [$PATH:/usr/sbin:/sbin:/usr/local/sbin])
if test -z "$SYSTEM_GENCMN"; then
AC_MSG_ERROR([\"gencmn\" not found in \$PATH, install the icu development tool \"gencmn"\])
fi
AC_MSG_CHECKING([ICU version])
AC_TRY_RUN([
#include <unicode/uversion.h>
int main(int argc, char **argv) {
if(U_ICU_VERSION_MAJOR_NUM < 4)
return 1;
else
return 0;
}
], [AC_MSG_RESULT(OK)], [AC_MSG_ERROR([not suitable, only >= 4.0 supported currently])])
AC_LANG_POP([C++])
else
AC_MSG_RESULT([internal])
SYSTEM_ICU=NO
BUILD_TYPE="$BUILD_TYPE ICU"
fi
AC_SUBST(SYSTEM_ICU)
AC_SUBST(SYSTEM_GENBRK)
AC_SUBST(SYSTEM_GENCCODE)
AC_SUBST(SYSTEM_GENCMN)
dnl ===================================================================
dnl Graphite
dnl ===================================================================
AC_MSG_CHECKING([whether to enable graphite support])
if test "$_os" = "WINNT" -o "$_os" = "Linux" && test "z$enable_graphite" = "z" -o
"$enable_graphite" != "no" ; then
AC_MSG_RESULT([yes])
ENABLE_GRAPHITE="TRUE"
AC_MSG_CHECKING([which graphite to use])
if test -n "$with_system_graphite" -o -n "$with_system_libs" && \
test "$with_system_graphite" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_GRAPHITE=YES
PKG_CHECK_MODULES( GRAPHITE, silgraphite )
else
AC_MSG_RESULT([internal])
SYSTEM_GRAPHITE=NO
BUILD_TYPE="$BUILD_TYPE GRAPHITE"
fi
else
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_GRAPHITE)
AC_SUBST(SYSTEM_GRAPHITE)
AC_SUBST(GRAPHITE_LIBS)
AC_SUBST(GRAPHITE_CFLAGS)
dnl ===================================================================
dnl Checks for libraries.
dnl ===================================================================
dnl Check for Mac OS X native GUI, which may is now required; the X11 build is no longer supported
dnl See if we have the AppKit framework for building with Quartz graphics.
if test "$_os" = "Darwin"; then
if test "x$with_x" = "xyes"; then
AC_MSG_ERROR([X11 build is no longer supported on MacOSX, please use the native aqua build])
else
AC_MSG_CHECKING([for /System/Library/Frameworks/AppKit.framework])
if test -d "/System/Library/Frameworks/AppKit.framework/"; then
AC_MSG_RESULT([yes])
x_includes="no_x_includes"
x_libraries="no_x_libraries"
dnl disable some things used on other Unix versions but not on the aqua build
enable_gtk=no
enable_cups=no
ENABLE_CUPS=""
AC_SUBST(ENABLE_CUPS)
else
AC_MSG_ERROR([No AppKit.framewrok found])
fi
fi
fi
dnl ***************************************
dnl testing for X libraries and includes...
dnl ***************************************
if test "$_os" = "Darwin" -a "x$x_includes" = "xno_x_includes"; then
echo "Do Nothing for _os = Darwin"
dnl Mac OS X using Aqua graphics. Don't check for X11.
:
elif test "$_os" = "OS2" ; then
echo "Do Nothing for _os = OS2. Don't check for X11."
dnl OS/2 uses native graphics. Don't check for X11.
:
elif test "$_os" != "WINNT" ; then
AC_PATH_X
AC_PATH_XTRA
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
if test "x$x_includes" = "x"; then
x_includes="default_x_includes"
fi
if test "x$x_libraries" = "x"; then
x_libraries="default_x_libraries"
fi
dnl The variables $x_libraries and $x_includes are set.
if test -z "$x_libraries"; then
AC_MSG_ERROR([No X libraries found]) # Exit
fi
if test -z "$x_includes"; then
AC_MSG_ERROR([No X includes found]) # Exit
fi
CFLAGS="$CFLAGS $X_CFLAGS"
LDFLAGS="$LDFLAGS $X_LDFLAGS $X_LIBS"
AC_CHECK_LIB(X11, XOpenDisplay, x_libs="-lX11 $X_EXTRA_LIBS", [AC_MSG_ERROR([X Development
libraries not found])])
dnl Check if the XauDisposeAuth symbol is provided by libXau.
AC_CHECK_LIB(Xau, XauDisposeAuth, XAU_LIBS="-lXau", [])
else
x_includes="no_x_includes"
x_libraries="no_x_libraries"
fi
if test -z "$x_includes"; then
x_includes="no_x_includes"
fi
if test -z "$x_libraries"; then
x_libraries="no_x_libraries"
fi
if test "$x_includes" = "default_x_includes"; then
XINC="/usr/include"
else
XINC="$x_includes"
fi
AC_SUBST(XINC)
if test "$x_libraries" = "default_x_libraries"; then
XLIB=`$PKG_CONFIG --variable=libdir x11`
if test "x$XLIB" = x; then
XLIB="/usr/lib"
fi
else
XLIB="$x_libraries"
fi
AC_SUBST(XLIB)
AC_SUBST(XAU_LIBS)
if test "$_os" != "WINNT" -a "$_os" != "OS2" -a "$_os" != "Darwin"; then
dnl ===================================================================
dnl Check for using Xaw
dnl ===================================================================
AC_MSG_CHECKING([whether to use Xaw])
if test "$enable_Xaw" = "no"; then
DISABLE_XAW=TRUE
AC_MSG_RESULT([no])
AC_CHECK_HEADERS(X11/Composite.h,[],[AC_MSG_ERROR([Xt include headers not found])],
[#include <X11/Intrinsic.h>])
else
AC_MSG_RESULT([yes])
AC_CHECK_HEADERS(X11/Xaw/Label.h,[],[AC_MSG_ERROR([Xaw include headers not found])],
[#include <X11/Intrinsic.h>])
AC_CHECK_LIB(Xaw, main, [],
[AC_MSG_ERROR(Xaw library not found or functional)], [])
fi
fi
AC_SUBST(DISABLE_XAW)
dnl ===================================================================
dnl Check if fontconfig/fontconfig.h is available
dnl ===================================================================
if test "$ENABLE_FONTCONFIG" = "TRUE" ; then
AC_CHECK_HEADER(fontconfig/fontconfig.h, [],
[AC_MSG_ERROR([fontconfig/fontconfig.h could not be found. libfontconfig1-dev
or fontconfig???-devel missing?])], [])
AC_MSG_CHECKING([whether fontconfig is >= 2.2.0])
AC_TRY_RUN([
#include <fontconfig/fontconfig.h>
int main(int argc, char **argv) {
if(FC_MAJOR > 2 || (FC_MAJOR == 2 && FC_MINOR >= 2)) return 0;
else return 1;
}
], [AC_MSG_RESULT([yes])], [AC_MSG_ERROR([no, fontconfig >= 2.2.0 needed])])
fi
dnl ===================================================================
dnl Check for system Xrender
dnl ===================================================================
AC_MSG_CHECKING([whether to link to Xrender])
if test -n "$enable_xrender_link" -a "$enable_xrender_link" != "no"; then
AC_MSG_RESULT([yes])
XRENDER_LINK=YES
with_system_xrender_headers=yes
else
AC_MSG_RESULT([no, dynamically open it])
XRENDER_LINK=NO
fi
AC_MSG_CHECKING([which Xrender headers to use])
if test -n "$with_system_xrender_headers" -o -n "$with_system_headers" && \
test "$with_system_xrender_headers" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_XRENDER_HEADERS=YES
AC_CHECK_HEADER(X11/extensions/Xrender.h, [],
[AC_MSG_ERROR(Xrender not found. install X)], [])
else
AC_MSG_RESULT([internal])
SYSTEM_XRENDER_HEADERS=NO
BUILD_TYPE="$BUILD_TYPE X11_EXTENSIONS"
fi
if test "$XRENDER_LINK" = "YES"; then
AC_CHECK_LIB(Xrender, XRenderQueryVersion, [],
[AC_MSG_ERROR(libXrender not found or functional)], [])
fi
AC_SUBST(SYSTEM_XRENDER_HEADERS)
AC_SUBST(XRENDER_LINK)
dnl ===================================================================
dnl Check for XRandr
dnl ===================================================================
AC_MSG_CHECKING([whether to enable RandR support])
if test "$test_randr" = "yes" -a \( "$enable_randr" = "yes" -o "$enable_randr" = "TRUE" \) ; then
if test -z "$enable_randr_link" -o "$enable_randr_link" = "no"; then
XRANDR_DLOPEN="TRUE"
AC_MSG_RESULT([configured to dlopen libXrandr at runtime])
else
AC_MSG_RESULT([yes])
XRANDR_DLOPEN="FALSE"
PKG_CHECK_MODULES(XRANDR, xrandr >= 1.2, ENABLE_RANDR="TRUE", ENABLE_RANDR="")
if test "$ENABLE_RANDR" != "TRUE"; then
AC_CHECK_HEADER(X11/extensions/Xrandr.h, [],
[AC_MSG_ERROR([X11/extensions/Xrandr.h could not be found. X11 dev
missing?])], [])
XRANDR_CFLAGS=" "
AC_CHECK_LIB(Xrandr, XRRQueryExtension, [],
[ AC_MSG_ERROR(libXrandr not found or functional) ], [])
XRANDR_LIBS="-lXrandr "
ENABLE_RANDR="TRUE"
fi
fi
else
ENABLE_RANDR=""
AC_MSG_RESULT([no])
fi
AC_SUBST(XRANDR_DLOPEN)
AC_SUBST(XRANDR_CFLAGS)
AC_SUBST(XRANDR_LIBS)
AC_SUBST(ENABLE_RANDR)
dnl ===================================================================
dnl Check for system Mesa
dnl ===================================================================
AC_MSG_CHECKING([which Mesa headers to use])
if test "$with_system_mesa_headers" = "no"; then
AC_MSG_RESULT([internal])
SYSTEM_MESA_HEADERS=NO
BUILD_TYPE="$BUILD_TYPE MESA"
else
AC_MSG_RESULT([external])
SYSTEM_MESA_HEADERS=YES
fi
AC_SUBST(SYSTEM_MESA_HEADERS)
dnl ===================================================================
dnl Check for building neon
dnl ===================================================================
AC_MSG_CHECKING([whether to use neon])
if test "$enable_neon" = "no"; then
AC_MSG_RESULT([no])
DISABLE_NEON=TRUE
AC_SUBST(DISABLE_NEON)
else
AC_MSG_RESULT([yes])
dnl ===================================================================
dnl Check for system neon
dnl ===================================================================
AC_MSG_CHECKING([which neon to use])
if test -n "$with_system_neon" -o -n "$with_system_libs" && \
test "$with_system_neon" != "no"; then
AC_MSG_RESULT([external])
PKG_CHECK_MODULES(NEON, neon >= 0.24.0, , AC_MSG_ERROR([you need neon >= 0.24.x for
system-neon]))
NEON_VERSION="`$PKG_CONFIG --modversion neon | $SED 's/\.//g'`"
NEON_CFLAGS="$NEON_CFLAGS -DSYSTEM_NEON -DUSE_DAV_LOCKS=1"
SYSTEM_NEON=YES
else
AC_MSG_RESULT([internal])
SYSTEM_NEON=NO
NEON_LIBS=-lneon
NEON_CFLAGS=
BUILD_TYPE="$BUILD_TYPE NEON"
fi
AC_SUBST(SYSTEM_NEON)
AC_SUBST(NEON_VERSION)
AC_SUBST(NEON_LIBS)
AC_SUBST(NEON_CFLAGS)
fi
dnl ===================================================================
dnl Check for system openssl
dnl ===================================================================
if test "$_os" = "Darwin" -o "$_os" = "NetBSD" -o "$_os" = "OpenBSD" && test "$with_system_openssl"
!= "no"; then
with_system_openssl=yes
fi
AC_MSG_CHECKING([which libssl to use])
if test -n "$with_system_openssl" -o -n "$with_system_libs" && \
test "$with_system_openssl" != "no"; then
AC_MSG_RESULT([external])
# Mac OS builds should get out without extra stuff is the Mac porters'
# wish. And pkg-config is although Xcode ships a .pc for openssl
if test "$_os" = "Darwin" -o "$_os" = "NetBSD" -o "$_os" = "OpenBSD" ; then
OPENSSL_CFLAGS=
OPENSSL_LIBS="-lssl -lcrypto"
else
PKG_CHECK_MODULES( OPENSSL, openssl )
fi
SYSTEM_OPENSSL=YES
else
AC_MSG_RESULT([internal])
SYSTEM_OPENSSL=NO
BUILD_TYPE="$BUILD_TYPE OPENSSL"
fi
AC_SUBST(SYSTEM_OPENSSL)
AC_SUBST(OPENSSL_CFLAGS)
AC_SUBST(OPENSSL_LIBS)
dnl ===================================================================
dnl Check for system redland
dnl ===================================================================
AC_MSG_CHECKING([which redland library to use])
if test -n "$with_system_redland" -o -n "$with_system_libs" && \
test "$with_system_redland" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_REDLAND=YES
dnl versions before 1.0.8 write RDF/XML that is useless for ODF (@xml:base)
PKG_CHECK_MODULES(REDLAND, redland >= 1.0.8)
else
AC_MSG_RESULT([internal])
BUILD_TYPE="$BUILD_TYPE REDLAND"
SYSTEM_REDLAND=NO
fi
AC_SUBST(SYSTEM_REDLAND)
AC_SUBST(REDLAND_CFLAGS)
AC_SUBST(REDLAND_LIBS)
dnl ===================================================================
dnl Check for system hunspell
dnl ===================================================================
AC_MSG_CHECKING([which libhunspell to use])
if test -n "$with_system_hunspell" -o -n "$with_system_libs" && \
test "$with_system_hunspell" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_HUNSPELL=YES
AC_LANG_PUSH([C++])
PKG_CHECK_MODULES(HUNSPELL, hunspell, HUNSPELL_PC="TRUE", HUNSPELL_PC="" )
if test "$HUNSPELL_PC" != "TRUE"; then
AC_CHECK_HEADER(hunspell.hxx, [],
[
AC_CHECK_HEADER(hunspell/hunspell.hxx, [ HUNSPELL_CFLAGS=-I/usr/include/hunspell ],
[AC_MSG_ERROR(hunspell headers not found.)], [])
], [])
AC_CHECK_LIB(hunspell, main, [],
[ AC_MSG_ERROR(hunspell library not found.) ], [])
HUNSPELL_LIBS=-lhunspell
fi
AC_LANG_POP([C++])
else
AC_MSG_RESULT([internal])
SYSTEM_HUNSPELL=NO
BUILD_TYPE="$BUILD_TYPE HUNSPELL"
fi
AC_SUBST(SYSTEM_HUNSPELL)
AC_SUBST(HUNSPELL_CFLAGS)
AC_SUBST(HUNSPELL_LIBS)
dnl ===================================================================
dnl Checking for altlinuxhyph
dnl ===================================================================
AC_MSG_CHECKING([which altlinuxhyph to use])
if test -n "$with_system_altlinuxhyph" -o -n "$with_system_libs" && \
test "$with_system_altlinuxhyph" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_HYPH=YES
AC_CHECK_HEADER(hyphen.h, [],
[ AC_MSG_ERROR(altlinuxhyph headers not found.)], [])
AC_CHECK_MEMBER(struct _HyphenDict.cset, [],
[ AC_MSG_ERROR(no. You are sure you have altlinuyhyph headers?)],
[#include <hyphen.h>])
AC_CHECK_LIB(hyphen, hnj_hyphen_hyphenate2, [HYPHEN_LIB=-lhyphen],
[ AC_MSG_ERROR(altlinuxhyph library not found or too old.)], [])
if test -z "$HYPHEN_LIB"; then
AC_CHECK_LIB(hyph, hnj_hyphen_hyphenate2, [HYPHEN_LIB=-lhyph],
[ AC_MSG_ERROR(altlinuxhyph library not found or too old.)], [])
fi
if test -z "$HYPHEN_LIB"; then
AC_CHECK_LIB(hnj, hnj_hyphen_hyphenate2, [HYPHEN_LIB=-lhnj],
[ AC_MSG_ERROR(altlinuxhyph library not found or too old.)], [])
fi
else
AC_MSG_RESULT([internal])
SYSTEM_HYPH=NO
BUILD_TYPE="$BUILD_TYPE HYPHEN"
fi
AC_SUBST(SYSTEM_HYPH)
AC_SUBST(HYPHEN_LIB)
dnl ===================================================================
dnl Checking for mythes
dnl ===================================================================
AC_MSG_CHECKING([which mythes to use])
if test -n "$with_system_mythes" -o -n "$with_system_libs" && \
test "$with_system_mythes" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_MYTHES=YES
AC_LANG_PUSH([C++])
PKG_CHECK_MODULES(MYTHES, mythes, MYTHES_PKGCONFIG=yes, MYTHES_PKGCONFIG=no)
if test "$MYTHES_PKGCONFIG" = "no"; then
AC_CHECK_HEADER(mythes.hxx, [],
[ AC_MSG_ERROR(mythes.hxx headers not found.)], [])
AC_CHECK_LIB(mythes-1.2, main, [],
[ MYTHES_FOUND=no], [])
if test "$MYTHES_FOUND" = "no"; then
AC_CHECK_LIB(mythes, main, [MYTHES_FOUND=yes],
[ MYTHES_FOUND=no], [])
fi
if test "$MYTHES_FOUND" = "no"; then
AC_MSG_ERROR([mythes library not found!.])
fi
fi
AC_LANG_POP([C++])
else
AC_MSG_RESULT([internal])
SYSTEM_MYTHES=NO
BUILD_TYPE="$BUILD_TYPE MYTHES"
fi
AC_SUBST(SYSTEM_MYTHES)
AC_SUBST(MYTHES_CFLAGS)
AC_SUBST(MYTHES_LIBS)
dnl ===================================================================
dnl Checking for lpsolve
dnl ===================================================================
AC_MSG_CHECKING([which lpsolve to use])
if test -n "$with_system_lpsolve" -o -n "$with_system_libs" && \
test "$with_system_lpsolve" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_LPSOLVE=YES
AC_CHECK_HEADER(lpsolve/lp_lib.h, [],
[ AC_MSG_ERROR(lpsolve headers not found.)], [])
# some systems need this. Like Ubuntu....
AC_CHECK_LIB(m, floor)
AC_CHECK_LIB(dl, dlopen)
AC_CHECK_LIB(lpsolve55, make_lp, ,
[ AC_MSG_ERROR(lpsolve library not found or too old.)], [])
else
AC_MSG_RESULT([internal])
SYSTEM_LPSOLVE=NO
BUILD_TYPE="$BUILD_TYPE LPSOLVE"
fi
AC_SUBST(SYSTEM_LPSOLVE)
dnl ===================================================================
dnl Checking for libtextcat
dnl ===================================================================
AC_MSG_CHECKING([which libtextcat to use])
if test -n "$with_system_libtextcat" && test "$with_system_libtextcat" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_LIBTEXTCAT=YES
AC_CHECK_HEADER(libtextcat/textcat.h, [],
[ AC_MSG_ERROR(libtextcat headers not found.)], [])
AC_CHECK_LIB(textcat, special_textcat_Init, ,
[ AC_MSG_ERROR(libtextcat library not found or not suitable. libtextcat typically needs to
be patched)], [])
else
AC_MSG_RESULT([internal])
SYSTEM_LIBTEXTCAT=NO
BUILD_TYPE="$BUILD_TYPE LIBTEXTCAT"
fi
AC_SUBST(SYSTEM_LIBTEXTCAT)
AC_MSG_CHECKING([which libtextcat data directory to use])
if test -n "$with_external_libtextcat_data" && test "$with_external_libtextcat_data" != "no"; then
if test "$with_external_libtextcat_data" = "yes"; then
SYSTEM_LIBTEXTCAT_DATA=file:///usr/share/libtextcat
else
SYSTEM_LIBTEXTCAT_DATA=file://$with_external_libtextcat_data
fi
AC_MSG_RESULT([$SYSTEM_LIBTEXTCAT_DATA])
else
AC_MSG_RESULT([internal])
BUILD_TYPE="$BUILD_TYPE LIBTEXTCATDATA"
fi
AC_SUBST(SYSTEM_LIBTEXTCAT_DATA)
dnl ***************************************
dnl testing libc version for Linux...
dnl ***************************************
if test "$_os" = "Linux"; then
AC_MSG_CHECKING([whether libc is >= 2.1.1])
exec 6>/dev/null # no output
AC_CHECK_LIB(c, gnu_get_libc_version, HAVE_LIBC=yes; export HAVE_LIBC)
exec 6>&1 # output on again
if test "$HAVE_LIBC"; then
AC_MSG_RESULT([yes])
else
AC_MSG_ERROR([no, upgrade libc])
fi
fi
if test "$_os" != "WNT"; then
AC_CHECK_FUNCS(getopt, HAVE_GETOPT=YES, [HAVE_GETOPT=NO])
AC_CHECK_FUNCS(readdir_r, HAVE_READDIR_R=YES, [HAVE_READDIR_R=NO])
if test "$HAVE_GETOPT" = "YES" -a "$HAVE_READDIR_R" = "YES"; then
SYSTEM_LIBC=YES
fi
else
HAVE_GETOPT=NO
HAVE_READDIR_R=NO
SYSTEM_LIBC=YES
fi
AC_SUBST(HAVE_GETOPT)
AC_SUBST(HAVE_READDIR_R)
AC_SUBST(SYSTEM_LIBC)
dnl =========================================
dnl Check for the Microsoft Platform SDK.
dnl =========================================
dnl FIXME: I don't know yet if PSDK works with MinGW, keep it until I know better,
dnl and add "-a \( "$WITH_MINGWIN" != "yes" \)" then
if test \( "$_os" = "WINNT" \) ; then
AC_MSG_CHECKING([for PSDK files])
if test -z "$with_psdk_home"; then
# This first line will detect a February 2003 Microsoft Platform SDK
PSDK_HOME=`./oowintool --psdk-home`
# But there might be also an April 2005 PSDK, unfortunately MS changed
# the registry entry. (we prefer the old version!?)
if test -z "$PSDK_HOME"; then
PSDK_HOME=`cat
/proc/registry/HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/MicrosoftSDK/InstalledSDKs/*/Install\ Dir 2>
/dev/null | tr '\000' '\n' | head -n 1`
fi
# normalize if found
if test -n "$PSDK_HOME"; then
PSDK_HOME=`cygpath -d "$PSDK_HOME"`
PSDK_HOME=`cygpath -u "$PSDK_HOME"`
fi
else
PSDK_HOME=`cygpath -u "$with_psdk_home"`
fi
# Remove a possible trailing backslash
PSDK_HOME=`echo $PSDK_HOME | $SED 's/\/$//'`
# Problem with current PSDK (iz 49865)
if test -f "$PSDK_HOME/Lib/libcp.lib"; then
AC_MSG_ERROR([
Some modules do not build correctly with MS Platform SDK - April 2005
Edition if the library ($PSDK_HOME/Lib/libcp.lib) is found.
Remove/rename/backup that file and restart configure. Details about this
problem can be found in issue 49856.])
fi
# WIndows SDK has different headers
if test \( -f "$PSDK_HOME/Include/adoint.h" \) \
-a \( -f "$PSDK_HOME/Include/SqlUcode.h" \) \
-a \( -f "$PSDK_HOME/Include/usp10.h" \); then
HAVE_PSDK_H="yes"
else
HAVE_PSDK_H="no"
fi
if test -f "$PSDK_HOME/lib/user32.lib"; then
HAVE_PSDK_LIB="yes"
else
HAVE_PSDK_LIB="no"
fi
if test "$HAVE_PSDK_H" = "no" -o "$HAVE_PSDK_LIB" = "no"; then
AC_MSG_ERROR([Some (all?) PSDK files not found, please check if all needed Platform SDKs
are installed or use --with-psdk-home .])
fi
if test ! -x "$PSDK_HOME/bin/msiinfo.exe" \
-o ! -x "$PSDK_HOME/bin/msidb.exe" \
-o ! -x "$PSDK_HOME/bin/uuidgen.exe" \
-o ! -x "$PSDK_HOME/bin/msitran.exe" ; then
AC_MSG_ERROR([Some (all) files of the Windows Installer SDK are missing, please install.])
fi
AC_MSG_RESULT([SDK files found ...)])
dnl Check if this is the right SDK.
if echo $PSDK_HOME | grep "v6.1" >/dev/null 2>/dev/null; then
AC_MSG_RESULT([Found Windows SDK 6.1 ($PSDK_HOME)])
WINDOWS_VISTA_PSDK=TRUE
elif echo $PSDK_HOME | grep "v6.0" >/dev/null 2>/dev/null; then
AC_MSG_RESULT([Found Windows SDK 6.0 ($PSDK_HOME)])
WINDOWS_VISTA_PSDK=TRUE
elif echo $PSDK_HOME | grep "v7" >/dev/null 2>/dev/null; then
AC_MSG_RESULT([Found Windows SDK 7 ($PSDK_HOME)])
WINDOWS_VISTA_PSDK=TRUE
else
AC_MSG_RESULT([Found Legacy Windows Platform SDK ($PSDK_HOME)])
fi
fi
AC_SUBST(PSDK_HOME)
AC_SUBST(WINDOWS_VISTA_PSDK)
dnl =========================================
dnl Check for the Microsoft DirectX SDK.
dnl =========================================
if test \( "$_os" = "WINNT" \) ; then
AC_MSG_CHECKING([for DirectX SDK files])
if test -z "$with_directx_home"; then
dnl A standard installation of the DirectX SDK sets $DXSDK_DIR
if test -n "$DXSDK_DIR"; then
DIRECTXSDK_HOME=`cygpath -d "$DXSDK_DIR"`
DIRECTXSDK_HOME=`cygpath -u "$DIRECTXSDK_HOME"`
fi
# At this point $DIRECTXSDK_HOME might still be undefined. This will lead to
# the "DirectX SDK files not found" error later
else
DIRECTXSDK_HOME=`cygpath -u "$with_directx_home"`
fi
# Remove a possible trailing backslash
DIRECTXSDK_HOME=`echo $DIRECTXSDK_HOME | $SED 's/\/$//'`
if test -f "$DIRECTXSDK_HOME/Include/ddraw.h" ; then
HAVE_DIRECTXSDK_H="yes"
else
HAVE_DIRECTXSDK_H="no"
fi
# MS changed the location of the libraries with dec 2004 directx sdk
if test -d "$DIRECTXSDK_HOME/lib/x86" ; then
DIRECTXSDK_LIB="$DIRECTXSDK_HOME/lib/x86"
else
DIRECTXSDK_LIB="$DIRECTXSDK_HOME/lib"
fi
if test -f "$DIRECTXSDK_LIB/ddraw.lib" ; then
HAVE_DIRECTXSDK_LIB="yes"
else
HAVE_DIRECTXSDK_LIB="no"
fi
if test -n "$ENABLE_DIRECTX"; then
if test "$HAVE_DIRECTXSDK_H" = "yes" -a "$HAVE_DIRECTXSDK_LIB" = "yes"; then
AC_MSG_RESULT([found])
else
AC_MSG_ERROR([DirectX SDK files not found, please use --with-directx-home or
-disable-directx.])
fi
else
DIRECTXSDK_HOME=""
AC_MSG_RESULT([disabled])
fi
fi
AC_SUBST(DIRECTXSDK_HOME)
AC_SUBST(DIRECTXSDK_LIB)
dnl ============================================
dnl Check for Nullsoft Scriptable Install System
dnl ============================================
NSIS_PATH=""
if test "$_os" = "WINNT" ; then
AC_MSG_CHECKING([for NSIS])
AC_PATH_PROG(NSIS_PATH, nsis.exe)
if test -n "$NSIS_PATH"; then
NSIS_PATH=`dirname "$NSIS_PATH"`
fi
if test -n "$with_nsis_path"; then
with_nsis_path=`cygpath -u "$with_nsis_path"`
fi
if test -e "$with_nsis_path/nsis.exe"; then
NSIS_PATH="$with_nsis_path"
fi
nsistest=`./oowintool --nsis-dir`;
if test -x "$nsistest/nsis.exe"; then
NSIS_PATH="$nsistest"
fi
if test -z "$NSIS_PATH"; then
AC_MSG_WARN([NSIS not found, no self contained installer will be build.])
echo "NSIS not found, no self contained installer will be build." >> warn
else
NSIS_PATH=`cygpath -d "$NSIS_PATH"`
NSIS_PATH=`cygpath -u "$NSIS_PATH"`
AC_MSG_RESULT([found ($NSIS_PATH)])
fi
fi
AC_SUBST(NSIS_PATH)
dnl ***************************************
dnl testing bison and flex exist
dnl ***************************************
AC_PATH_PROG(BISON, bison)
if test -z "$BISON"; then
AC_MSG_ERROR([no bison found in \$PATH, install bison])
else
AC_MSG_CHECKING([the bison version])
_bison_version=`$BISON --version | grep GNU | $SED -e 's@^[[^0-9]]*@@' -e 's@ .*@@' -e
's@,.*@@'`;
_bison_longver=`echo $_bison_version | $AWK -F. '{ print \$1*1000+\$2}'`
# Accept newer than 1.875 or older(equal) than 1.75
if test "$_bison_longver" -ge 1875 -o "$_bison_longver" -le 1075; then
if test "$_bison_version" = "1.875" ; then
AC_MSG_WARN([suspect ($BISON $_bison_version)])
echo "Suspect ($BISON $_bison_version) suggest upgrade" >> warn
else
AC_MSG_RESULT([checked ($BISON $_bison_version)])
fi
else
AC_MSG_ERROR([failed ($BISON $_bison_version need 1.875+ (or 1.75 and older))])
fi
fi
AC_PATH_PROG(FLEX, flex)
if test -z "$FLEX"; then
AC_MSG_ERROR([no flex found in \$PATH, install flex])
fi
dnl ***************************************
dnl testing that patch exists
dnl ***************************************
AC_PATH_PROG(PATCH, patch)
if test -z "$PATCH"; then
AC_MSG_ERROR([\"patch\" not found in \$PATH, install the development tool named\"patch"\])
fi
dnl On Solaris, FreeBSD or MacOS X, check if --with-gnu-patch was used
if test "$_os" = "SunOS" -o "$_os" = "FreeBSD" -o "$_os" = "Darwin"; then
if test -z "$with_gnu_patch"; then
GNUPATCH=$PATCH
else
if test -x "$with_gnu_patch"; then
GNUPATCH=$with_gnu_patch
else
AC_MSG_ERROR([--with-gnu-patch did not point to an executable])
fi
fi
AC_MSG_CHECKING([whether $GNUPATCH is GNU patch])
if $GNUPATCH --version | grep "Free Software Foundation" >/dev/null 2>/dev/null; then
AC_MSG_RESULT([yes])
else
AC_MSG_ERROR([no, GNU patch needed. install or specify with --with-gnu-patch=/path/to/it])
fi
dnl We also need to check for --with-gnu-cp
if test -z "$with_gnu_cp"; then
AC_PATH_PROGS(GNUCP, gnucp cp)
if test -z $GNUCP; then
AC_MSG_ERROR([Neither gnucp nor cp found. Install GNU cp and/or specify
--with-gnu-cp=/path/to/it])
fi
else
if test -x "$with_gnu_cp"; then
GNUCP=$with_gnu_cp
else
AC_MSG_ERROR([--with-gnu-cp did not point to an executable])
fi
fi
AC_MSG_CHECKING([whether $GNUCP is GNU cp])
if $GNUCP --version 2>/dev/null | grep "Free Software Foundation" >/dev/null 2>/dev/null; then
AC_MSG_RESULT([yes])
else
if $GNUCP --version 2>/dev/null | grep "GNU fileutils" >/dev/null 2>/dev/null; then
AC_MSG_RESULT([yes])
else
if test "$_os" = "Darwin"; then
GNUCP=''
AC_MSG_RESULT([no gnucp found - using the system's cp command])
else
AC_MSG_ERROR([no, GNU cp needed. install or specify with --with-gnu-cp=/path/to/it])
fi
fi
fi
fi
AC_SUBST(GNUPATCH)
AC_SUBST(GNUCP)
dnl ***************************************
dnl testing bash tools path on Windows
dnl ***************************************
if test "$_os" = "WINNT"; then
CYGWIN_PATH=""
AC_PATH_PROG(CYGWIN_PATH, bash)
CYGWIN_PATH=`dirname "$CYGWIN_PATH"`
fi
if test -z "$CYGWIN_PATH"; then
CYGWIN_PATH="NO_CYGWIN"
fi
AC_SUBST(CYGWIN_PATH)
dnl ***************************************
dnl testing ml.exe assembler path
dnl ***************************************
if test "$_os" = "WINNT" -a "$WITH_MINGWIN" != "yes"; then
AC_MSG_CHECKING([ml.exe assembler path])
if test -n "$with_asm_home"; then
with_asm_home=`cygpath -u "$with_asm_home"`
fi
if test ! -x "$with_asm_home/ml.exe"; then
AC_PATH_PROG(ML_EXE, ml.exe)
if test -z "$ML_EXE"; then
if test -x "$with_cl_home/bin/ml.exe"; then
with_asm_home=$with_cl_home/bin
AC_MSG_RESULT([found ($with_asm_home)])
else
AC_MSG_ERROR([Configure did not find ml.exe assembler.])
fi
else
with_asm_home="ASM_IN_PATH"
fi
fi
AC_MSG_RESULT([$ASM_HOME])
else
with_asm_home="NO_ASM_HOME"
fi
ASM_HOME="$with_asm_home"
AC_SUBST(ASM_HOME)
dnl ===================================================================
dnl Zip will be found where you tell me to find it
dnl ===================================================================
if test -n "$with_zip_home" ; then
if test "$_os" = "WINNT"; then
with_zip_home=`cygpath -u "$with_zip_home"`
fi
ZIP="$with_zip_home/zip"
UNZIP="$with_zip_home/unzip"
ZIP_HOME="$with_zip_home"
else
AC_PATH_PROG(ZIP, zip)
AC_PATH_PROG(UNZIP, unzip)
ZIP_HOME=`dirname "$ZIP"`
fi
dnl ===================================================================
dnl Zip must be available or else it is an error, all platforms
dnl ===================================================================
if test -z "$ZIP" -o -z "$UNZIP"; then
AC_MSG_ERROR([Zip/Unzip are required to build, please install or use --with-zip-home],,)
fi
dnl ===================================================================
dnl Zip must be a specific type for different build types.
dnl ===================================================================
if test "$_os" = "WINNT"; then
if test -n "`$ZIP -h | grep -i WinNT`" ; then
AC_MSG_ERROR([$ZIP found in the path is not the required cygwin version of Info-ZIPs zip.exe.])
fi
fi
AC_SUBST(ZIP_HOME)
dnl ===================================================================
dnl Test which vclplugs have to be built.
dnl ===================================================================
AC_MSG_CHECKING([which VCLplugs shall be built])
ENABLE_GTK=""
if test "x$enable_gtk" = "xyes"; then
ENABLE_GTK="TRUE"
R="gtk"
fi
AC_SUBST(ENABLE_GTK)
ENABLE_KDE=""
if test "x$enable_kde" = "xyes"; then
ENABLE_KDE="TRUE"
R="$R kde"
fi
AC_SUBST(ENABLE_KDE)
ENABLE_KDE4=""
if test "x$enable_kde4" = "xyes"; then
ENABLE_KDE4="TRUE"
R="$R kde4"
fi
AC_SUBST(ENABLE_KDE4)
if test -z "$R"; then
AC_MSG_RESULT([none])
else
AC_MSG_RESULT([$R])
fi
dnl ===================================================================
dnl GCONF check
dnl ===================================================================
ENABLE_GCONF=""
AC_MSG_CHECKING([whether to enable GConf support])
if test "$_os" != "WINNT" -a "$_os" != "Darwin" -a "$_os" != "OS2" -a "$enable_gconf" = "yes"; then
ENABLE_GCONF="TRUE"
AC_MSG_RESULT([yes])
PKG_CHECK_MODULES( GCONF, gconf-2.0 )
else
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_GCONF)
dnl ===================================================================
dnl Gnome VFS check
dnl ===================================================================
ENABLE_GNOMEVFS=""
AC_MSG_CHECKING([whether to enable GNOME VFS support])
if test "$_os" != "WINNT" -a "$_os" != "Darwin" -a "$enable_gnome_vfs" = "yes"; then
ENABLE_GNOMEVFS="TRUE"
AC_MSG_RESULT([yes])
PKG_CHECK_MODULES( GNOMEVFS, gnome-vfs-2.0 >= 2.6.0 )
if test "$ENABLE_GCONF" != "TRUE"; then
PKG_CHECK_MODULES( GCONF, gconf-2.0 )
fi
else
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_GNOMEVFS)
dnl ===================================================================
dnl Check whether the gtk 2.0 libraries are available.
dnl ===================================================================
GTK_CFLAGS=""
GTK_LIBS=""
ENABLE_SYSTRAY_GTK=""
ENABLE_DBUS=""
if test "$test_gtk" = "yes"; then
if test "$ENABLE_GTK" = "TRUE" ; then
PKG_CHECK_MODULES(GTK, gtk+-2.0 >= 2.4 gdk-pixbuf-xlib-2.0 >= 2.2
,,AC_MSG_ERROR([requirements to build the gtk-plugin not met. Use --disable-gtk or install the
missing packages]))
BUILD_TYPE="$BUILD_TYPE GTK"
if test "x$enable_systray" = "xyes"; then
ENABLE_SYSTRAY_GTK="TRUE"
BUILD_TYPE="$BUILD_TYPE SYSTRAY_GTK"
fi
AC_MSG_CHECKING([whether to enable DBUS support])
if test "$_os" != "WINNT" -a "$_os" != "Darwin" -a "$enable_dbus" = "yes"; then
ENABLE_DBUS="TRUE"
AC_MSG_RESULT([yes])
PKG_CHECK_MODULES( DBUS, dbus-glib-1 >= 0.70 )
else
AC_MSG_RESULT([no])
fi
AC_MSG_CHECKING([whether to enable GIO support])
if test "$_os" != "WINNT" -a "$_os" != "Darwin" -a "$enable_gio" = "yes"; then
if test "$ENABLE_GNOMEVFS" = "TRUE" ; then
AC_MSG_ERROR([please use --enable-gio only together with --disable-gnome-vfs.])
fi
ENABLE_GIO="TRUE"
AC_MSG_RESULT([yes])
PKG_CHECK_MODULES( GIO, gio-2.0 )
else
AC_MSG_RESULT([no])
fi
fi
fi
AC_SUBST(ENABLE_GIO)
AC_SUBST(ENABLE_DBUS)
AC_SUBST(ENABLE_SYSTRAY_GTK)
AC_SUBST(GTK_CFLAGS)
AC_SUBST(GTK_LIBS)
ENABLE_UNIX_QUICKSTARTER=""
if test "$test_unix_quickstarter" = "yes" -a "$enable_unix_quickstarter" = "yes"; then
ENABLE_UNIX_QUICKSTARTER="TRUE"
PKG_CHECK_MODULES( LIBPNG, libpng )
fi
AC_SUBST(LIBPNG_LIBS)
AC_SUBST(LIBPNG_CFLAGS)
AC_SUBST(ENABLE_UNIX_QUICKSTARTER)
ENABLE_BROFFICE=""
AC_MSG_CHECKING([whether to enable BrOffice branding])
if test "$enable_broffice" = "yes"; then
ENABLE_BROFFICE="TRUE"
fi
AC_SUBST(ENABLE_BROFFICE)
dnl ===================================================================
dnl Check whether the Cairo libraries are available.
dnl ===================================================================
ENABLE_CAIRO=""
BUILD_PIXMAN=""
SYSTEM_CAIRO=""
if test "$test_cairo" = "yes"; then
AC_MSG_CHECKING([whether to use cairo])
if test "x$enable_cairo" != "xno" ; then
ENABLE_CAIRO="TRUE"
AC_MSG_RESULT([yes])
AC_MSG_CHECKING([which cairo to use])
if test -n "$with_system_cairo" -o -n "$with_system_libs" && \
test "$with_system_cairo" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_CAIRO=YES
PKG_CHECK_MODULES( CAIRO, cairo >= 1.0.2 )
if test "$_os" != "WINNT" -a "$_os" != "Darwin" -a "$ENABLE_FONTCONFIG" != "TRUE" ; then
AC_MSG_ERROR([Cairo library requires fontconfig.])
fi
if test "$with_system_xrender_headers" = "yes"; then
AC_MSG_CHECKING([whether Xrender.h defines PictStandardA8])
AC_TRY_RUN([
#include <X11/extensions/Xrender.h>
int main(int argc, char **argv) {
#ifdef PictStandardA8
return 0;
#else
return 1;
#endif
}
], [AC_MSG_RESULT([yes])], [AC_MSG_ERROR([no, X headers too old.])])
fi
else
BUILD_TYPE="$BUILD_TYPE CAIRO"
BUILD_PIXMAN=YES
AC_MSG_RESULT([internal])
fi
else
AC_MSG_RESULT([no])
fi
fi
AC_SUBST(ENABLE_CAIRO)
AC_SUBST(BUILD_PIXMAN)
AC_SUBST(SYSTEM_CAIRO)
AC_SUBST(CAIRO_CFLAGS)
AC_SUBST(CAIRO_LIBS)
dnl ===================================================================
dnl Check whether the GStreamer libraries are available.
dnl ===================================================================
ENABLE_GSTREAMER=""
if test "$build_gstreamer" = "yes"; then
AC_MSG_CHECKING([whether to enable the GStreamer avmedia backend])
if test "x$enable_gstreamer" != "xno" ; then
ENABLE_GSTREAMER="TRUE"
AC_MSG_RESULT([yes])
PKG_CHECK_MODULES( GSTREAMER, gstreamer-0.10 gstreamer-plugins-base-0.10 )
else
AC_MSG_RESULT([no])
fi
fi
AC_SUBST(ENABLE_GSTREAMER)
dnl ===================================================================
dnl Check whether the OpenGL libraries are available
dnl ===================================================================
AC_MSG_CHECKING([whether to build the OpenGL Transitions component])
ENABLE_OPENGL=
if test "$_os" = "Darwin" ; then
# We use frameworks on Mac OS X, no need for detail checks
ENABLE_OPENGL=TRUE
AC_MSG_RESULT([yes])
else
if test "x$enable_opengl" != "xno" ; then
if test "$_os" != "WNT"; then
save_LDFLAGS=$LDFLAGS
LDFLAGS="$LDFLAGS -lm"
AC_MSG_RESULT([yes])
AC_CHECK_HEADER(GL/gl.h, [],
[AC_MSG_ERROR([OpenGL headers not found])], [])
AC_CHECK_LIB(GL, main, [],
[AC_MSG_ERROR(libGL not installed or functional)], [])
AC_CHECK_LIB(GLU, main, [],
[AC_MSG_ERROR(libGLU not installed or functional)], [])
ENABLE_OPENGL=TRUE
LDFLAGS=$save_LDFLAGS
else
AC_MSG_RESULT([not on windows])
fi
else
AC_MSG_RESULT([no])
fi
fi
AC_SUBST(ENABLE_OPENGL)
# presenter extra ui extension?
AC_MSG_CHECKING([whether to build extra presenter ui])
AS_IF([test "x$enable_ext_presenter_ui" = "xyes"], [
AC_MSG_RESULT([yes])
ENABLE_PRESENTER_EXTRA_UI=YES
],[
AC_MSG_RESULT([no])
ENABLE_PRESENTER_EXTRA_UI=NO
])
AC_SUBST(ENABLE_PRESENTER_EXTRA_UI)
# presenter minimizer extension?
AC_MSG_CHECKING([whether to build the Presentation Minimizer extension])
AS_IF([test "x$enable_ext_presenter_minimizer" = "xyes"], [
AC_MSG_RESULT([yes])
ENABLE_MINIMIZER=YES
],[
AC_MSG_RESULT([no])
ENABLE_MINIMIZER=NO
SCPDEFS="$SCPDEFS -DWITHOUT_EXTENSION_MINIMIZER"
])
AC_SUBST(ENABLE_MINIMIZER)
# presenter console extension?
AC_MSG_CHECKING([whether to build the Presenter Console extension])
AS_IF([test "x$enable_ext_presenter_console" = "xyes"], [
AC_MSG_RESULT([yes])
ENABLE_PRESENTER_SCREEN=YES
],[
AC_MSG_RESULT([no])
ENABLE_PRESENTER_SCREEN=NO
SCPDEFS="$SCPDEFS -DWITHOUT_EXTENSION_PRESENTER_SCREEN"
])
AC_SUBST(ENABLE_PRESENTER_SCREEN)
# pdf import extension?
AC_MSG_CHECKING([whether to build the PDF Import extension])
AS_IF([test "x$enable_ext_pdfimport" = "xyes"], [
AC_MSG_RESULT([yes])
ENABLE_PDFIMPORT=YES
dnl ===================================================================
dnl Check for system poppler
dnl ===================================================================
AC_MSG_CHECKING([which pdf backend to use])
if test -n "$with_system_poppler" -o -n "$with_system_libs" && \
test "$with_system_poppler" != "no"; then
AC_MSG_RESULT([external])
SYSTEM_POPPLER=YES
PKG_CHECK_MODULES( POPPLER, poppler >= 0.8.0 )
else
AC_MSG_RESULT([internal])
SYSTEM_POPPLER=NO
BUILD_TYPE="$BUILD_TYPE XPDF"
AC_MSG_CHECKING([for internal xpdf module])
if test -d ./xpdf; then
AC_MSG_RESULT([OK])
else
AC_MSG_ERROR([not existing! (Did you get the -extensions tarball?)])
fi
fi
],[
AC_MSG_RESULT([no])
ENABLE_PDFIMPORT=NO
SCPDEFS="$SCPDEFS -DWITHOUT_EXTENSION_PDFIMPORT"
])
AC_SUBST(ENABLE_PDFIMPORT)
AC_SUBST(SYSTEM_POPPLER)
AC_SUBST(POPPLER_CFLAGS)
AC_SUBST(POPPLER_LIBS)
if test "$ENABLE_PRESENTER_SCREEN" = "YES" -o "$ENABLE_MINIMIZER" = "YES" -o "$ENABLE_PDFIMPORT" =
"YES"; then
AC_MSG_CHECKING([for sdext module])
if test -d ./sdext; then
AC_MSG_RESULT([OK])
else
AC_MSG_ERROR([not existing. get it (did you get the -extensions tarball?)])
fi
BUILD_TYPE="$BUILD_TYPE SDEXT"
fi
AC_MSG_CHECKING([whether to build the Wiki Publisher extension])
AS_IF([test "x$enable_ext_wiki_publisher" = "xyes"], [
AC_MSG_RESULT([yes])
AC_MSG_CHECKING([for swext module])
if test -d ./swext; then
AC_MSG_RESULT([OK])
else
AC_MSG_ERROR([not existing. get it (did you get the -extensions tarball?)])
fi
ENABLE_MEDIAWIKI=YES
BUILD_TYPE="$BUILD_TYPE SWEXT"
if test "x$WITH_JAVA" = "xno"; then
AC_MSG_ERROR([wiki publisher requires Java! Enable java if you want to build it.])
fi
],[
AC_MSG_RESULT([no])
ENABLE_MEDIAWIKI=NO
SCPDEFS="$SCPDEFS -DWITHOUT_EXTENSION_MEDIAWIKI"
])
AC_SUBST(ENABLE_MEDIAWIKI)
if test "$ENABLE_MEDIAWIKI" = "YES"; then
AC_MSG_CHECKING([which Servlet API Jar to use])
if test -n "$with_system_servlet_api"; then
AC_MSG_RESULT([external])
SYSTEM_SERVLETAPI=YES
if test -z "$SERVLETAPI_JAR"; then
SERVLETAPI_JAR=/usr/share/java/servlet-api.jar
fi
AC_CHECK_FILE($SERVLETAPI_JAR, [],
[AC_MSG_ERROR(servlet-api.jar not found.)], [])
else
AC_MSG_RESULT([internal])
SYSTEM_SERVLETAPI=NO
BUILD_TYPE="$BUILD_TYPE TOMCAT"
fi
fi
AC_SUBST(SYSTEM_SERVLETAPI)
AC_SUBST(SERVLETAPI_JAR)
AC_MSG_CHECKING([whether to build the Report Builder extension])
if test -n "$enable_ext_report_builder" -a "$enable_ext_report_builder" != "no" && test
"$WITH_JAVA" != "no"; then
AC_MSG_RESULT([yes])
ENABLE_REPORTBUILDER=YES
AC_MSG_CHECKING([for reportbuilder module])
if test -d ./reportbuilder; then
AC_MSG_RESULT([OK])
else
AC_MSG_ERROR([not existing. get it (did you get the -extensions tarball?)])
fi
AC_MSG_CHECKING([which jfreereport libs to use])
if test "$with_system_jfreereport" = "yes"; then
SYSTEM_JFREEREPORT=YES
AC_MSG_RESULT([external])
if test -z $SAC_JAR; then
SAC_JAR=/usr/share/java/sac.jar
fi
AC_CHECK_FILE($SAC_JAR, [],
[AC_MSG_ERROR(sac.jar not found.)], [])
if test -z $LIBXML_JAR; then
AC_CHECK_FILE(/usr/share/java/libxml-1.0.0.jar,
[ LIBXML_JAR=/usr/share/java/libxml-1.0.0.jar ],
[
AC_CHECK_FILE(/usr/share/java/libxml.jar,
[ LIBXML_JAR=/usr/share/java/libxml.jar ],
[AC_MSG_ERROR(libxml.jar replacement not found.)]
)
]
)
else
AC_CHECK_FILE($LIBXML_JAR, [],
[AC_MSG_ERROR(libxml.jar not found.)], [])
fi
if test -z $FLUTE_JAR; then
AC_CHECK_FILE(/usr/share/java/flute-1.3.0.jar,
[ FLUTE_JAR=/usr/share/java/flute-1.3.0.jar ],
[
AC_CHECK_FILE(/usr/share/java/flute.jar,
[ FLUTE_JAR=/usr/share/java/flute.jar ],
[ AC_MSG_ERROR(flute-1.3.0.jar replacement not found.)]
)
]
)
else
AC_CHECK_FILE($FLUTE_JAR, [],
[AC_MSG_ERROR(flute-1.3.0.jar not found.)], [])
fi
if test -z $JFREEREPORT_JAR; then
AC_CHECK_FILE(/usr/share/java/flow-engine-0.9.2.jar,
[ JFREEREPORT_JAR=/usr/share/java/flow-engine-0.9.2.jar ],
[
AC_CHECK_FILE(/usr/share/java/flow-engine.jar,
[ JFREEREPORT_JAR=/usr/share/java/flow-engine.jar ],
[AC_MSG_ERROR(jfreereport.jar replacement not found.)]
)
]
)
else
AC_CHECK_FILE($JFREEREPORT_JAR, [],
[AC_MSG_ERROR(jfreereport.jar not found.)], [])
fi
if test -z $LIBLAYOUT_JAR; then
AC_CHECK_FILE(/usr/share/java/liblayout-0.2.9.jar,
[ LIBLAYOUT_JAR=/usr/share/java/liblayout-0.2.9.jar ],
[
AC_CHECK_FILE(/usr/share/java/liblayout.jar,
[ LIBLAYOUT_JAR=/usr/share/java/liblayout.jar ],
[AC_MSG_ERROR(liblayout.jar replacement not found.)]
)
]
)
else
AC_CHECK_FILE($LIBLAYOUT_JAR, [],
[AC_MSG_ERROR(liblayout.jar not found.)], [])
fi
if test -z $LIBLOADER_JAR; then
AC_CHECK_FILE(/usr/share/java/libloader-1.0.0.jar,
[ LIBLOADER_JAR=/usr/share/java/libloader-1.0.0.jar ],
[
AC_CHECK_FILE(/usr/share/java/libloader.jar,
[ LIBLOADER_JAR=/usr/share/java/libloader.jar ],
[AC_MSG_ERROR(libloader.jar replacement not found.)]
)
]
)
else
AC_CHECK_FILE($LIBLOADER_JAR, [],
[AC_MSG_ERROR(libloader.jar not found.)], [])
fi
if test -z $LIBFORMULA_JAR; then
AC_CHECK_FILE(/usr/share/java/libformula-0.2.0.jar,
[ LIBFORMULA_JAR=/usr/share/java/libformula-0.2.0.jar ],
[
AC_CHECK_FILE(/usr/share/java/libformula.jar,
[ LIBFORMULA_JAR=/usr/share/java/libformula.jar ],
[AC_MSG_ERROR(libformula.jar replacement not found.)]
)
]
)
else
AC_CHECK_FILE($LIBFORMULA_JAR, [],
[AC_MSG_ERROR(libformula.jar not found.)], [])
fi
if test -z $LIBREPOSITORY_JAR; then
AC_CHECK_FILE(/usr/share/java/librepository-1.0.0.jar,
[ LIBREPOSITORY_JAR=/usr/share/java/librepository-1.0.0.jar ],
[
AC_CHECK_FILE(/usr/share/java/librepository.jar,
[ LIBREPOSITORY_JAR=/usr/share/java/librepository.jar ],
[AC_MSG_ERROR(librepository.jar replacement not found.)]
)
]
)
else
AC_CHECK_FILE($LIBREPOSITORY_JAR, [],
[AC_MSG_ERROR(librepository.jar not found.)], [])
fi
if test -z $LIBFONTS_JAR; then
AC_CHECK_FILE(/usr/share/java/libfonts-1.0.0.jar,
[ LIBFONTS_JAR=/usr/share/java/libfonts-1.0.0.jar ],
[
AC_CHECK_FILE(/usr/share/java/libfonts.jar,
[ LIBFONTS_JAR=/usr/share/java/libfonts.jar ],
[AC_MSG_ERROR(libfonts.jar replacement not found.)]
)
]
)
else
AC_CHECK_FILE($LIBFONTS_JAR, [],
[AC_MSG_ERROR(libfonts.jar not found.)], [])
fi
if test -z $LIBSERIALIZER_JAR; then
AC_CHECK_FILE(/usr/share/java/libserializer-1.0.0.jar,
[ LIBSERIALIZER_JAR=/usr/share/java/libserializer-1.0.0.jar ],
[
AC_CHECK_FILE(/usr/share/java/libserializer.jar,
[ LIBSERIALIZER_JAR=/usr/share/java/libserializer.jar ],
[AC_MSG_ERROR(libserializer.jar replacement not found.)]
)
]
)
else
AC_CHECK_FILE($LIBSERIALIZER_JAR, [],
[AC_MSG_ERROR(libserializer.jar not found.)], [])
fi
if test -z $LIBBASE_JAR; then
AC_CHECK_FILE(/usr/share/java/libbase-1.0.0.jar,
[ LIBBASE_JAR=/usr/share/java/libbase-1.0.0.jar ],
[
AC_CHECK_FILE(/usr/share/java/libbase.jar,
[ LIBBASE_JAR=/usr/share/java/libbase.jar ],
[AC_MSG_ERROR(libbase.jar replacement not found.)]
)
]
)
else
AC_CHECK_FILE($LIBBASE_JAR, [],
[AC_MSG_ERROR(libbase.jar not found.)], [])
fi
else
AC_MSG_RESULT([internal])
AC_MSG_CHECKING([for jfreereport module])
if test -d ./jfreereport; then
AC_MSG_RESULT([OK])
else
AC_MSG_ERROR([not existing. get it (did you get the -extensions tarball?)])
fi
SYSTEM_JFREEREPORT=NO
BUILD_TYPE="$BUILD_TYPE JFREEREPORT"
fi
BUILD_TYPE="$BUILD_TYPE REPORTBUILDER"
else
AC_MSG_RESULT([no])
ENABLE_REPORTBUILDER=NO
SCPDEFS="$SCPDEFS -DWITHOUT_EXTENSION_REPORTDESIGN"
SYSTEM_JFREEREPORT=NO
fi
AC_SUBST(ENABLE_REPORTBUILDER)
AC_SUBST(SYSTEM_JFREEREPORT)
AC_SUBST(SAC_JAR)
AC_SUBST(LIBXML_JAR)
AC_SUBST(FLUTE_JAR)
AC_SUBST(JFREEREPORT_JAR)
AC_SUBST(LIBBASE_JAR)
AC_SUBST(LIBLAYOUT_JAR)
AC_SUBST(LIBLOADER_JAR)
AC_SUBST(LIBFORMULA_JAR)
AC_SUBST(LIBREPOSITORY_JAR)
AC_SUBST(LIBFONTS_JAR)
AC_SUBST(LIBSERIALIZER_JAR)
# this has to be here because both the wiki publisher and the SRB use
# commons-logging
if test "$ENABLE_MEDIAWIKI" = "YES" -o "$ENABLE_REPORTBUILDER" = "YES"; then
AC_MSG_CHECKING([which Apache commons-* libs to use])
if test "$with_system_apache_commons" = "yes"; then
SYSTEM_APACHE_COMMONS=YES
AC_MSG_RESULT([external])
if test "$ENABLE_MEDIAWIKI" = "YES"; then
if test -z $COMMONS_CODEC_JAR; then
AC_CHECK_FILE(/usr/share/java/commons-codec-1.3.jar,
[ COMMONS_CODEC_JAR=/usr/share/java/commons-codec-1.3.jar ],
[
AC_CHECK_FILE(/usr/share/java/commons-codec.jar,
[ COMMONS_CODEC_JAR=/usr/share/java/commons-codec.jar ],
[AC_MSG_ERROR(commons-codec.jar replacement not found.)]
)
]
)
else
AC_CHECK_FILE($COMMONS_CODEC_JAR, [],
[AC_MSG_ERROR(commons-codec.jar not found.)], [])
fi
if test -z $COMMONS_LANG_JAR; then
AC_CHECK_FILE(/usr/share/java/commons-lang-2.3.jar,
[ COMMONS_LANG_JAR=/usr/share/java/commons-lang-2.3.jar ],
[
AC_CHECK_FILE(/usr/share/java/commons-lang.jar,
[ COMMONS_LANG_JAR=/usr/share/java/commons-lang.jar ],
[AC_MSG_ERROR(commons-lang.jar replacement not found.)]
)
]
)
else
AC_CHECK_FILE($COMMONS_LANG_JAR, [],
[AC_MSG_ERROR(commons-lang.jar not found.)], [])
fi
if test -z $COMMONS_HTTPCLIENT_JAR; then
AC_CHECK_FILE(/usr/share/java/commons-httpclient-3.1.jar,
[ COMMONS_HTTPCLIENT_JAR=/usr/share/java/commons-httpclient-3.1.jar ],
[
AC_CHECK_FILE(/usr/share/java/commons-httpclient.jar,
[ COMMONS_HTTPCLIENT_JAR=/usr/share/java/commons-httpclient.jar ],
[AC_MSG_ERROR(commons-httpclient.jar replacement not found.)]
)
]
)
else
AC_CHECK_FILE($COMMONS_HTTPCLIENT_JAR, [],
[AC_MSG_ERROR(commons-httpclient.jar not found.)], [])
fi
fi
if test "$ENABLE_MEDIAWIKI" = "YES" -o "$ENABLE_REPORTBUILDER" = "YES"; then
if test -z $COMMONS_LOGGING_JAR; then
AC_CHECK_FILE(/usr/share/java/commons-logging-1.1.1.jar,
[ COMMONS_LOGGING_JAR=/usr/share/java/commons-logging-1.1.1.jar ],
[
AC_CHECK_FILE(/usr/share/java/commons-logging.jar,
[ COMMONS_LOGGING_JAR=/usr/share/java/commons-logging.jar ],
[AC_MSG_ERROR(commons-logging.jar replacement not found.)]
)
]
)
else
AC_CHECK_FILE($COMMONS_LOGGING_JAR, [],
[AC_MSG_ERROR(commons-logging.jar not found.)], [])
fi
fi
else
AC_MSG_RESULT([internal])
SYSTEM_APACHE_COMMONS=NO
BUILD_TYPE="$BUILD_TYPE APACHE_COMMONS TOMCAT"
fi
fi
AC_SUBST(SYSTEM_APACHE_COMMONS)
AC_SUBST(COMMONS_CODEC_JAR)
AC_SUBST(COMMONS_LANG_JAR)
AC_SUBST(COMMONS_HTTPCLIENT_JAR)
AC_SUBST(COMMONS_LOGGING_JAR)
dnl ===================================================================
dnl Check whether the Qt3 and KDE3 libraries are available.
dnl ===================================================================
KDE_CFLAGS=""
KDE_LIBS=""
if test "$_os" != "OpenBSD"; then
MOC="moc"
fi
if test "$test_kde" = "yes" -a "$ENABLE_KDE" = "TRUE" ; then
dnl Search paths for Qt3 and KDE3
if test "$build_cpu" != "x86_64" ; then
qt_incdirs="$QTINC /usr/local/qt/include /usr/include/qt /usr/include
/usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/lib/qt3/include /usr/lib/qt/include
/usr/share/qt3/include /usr/local/include/X11/qt3 $x_includes"
qt_libdirs="$QTLIB /usr/local/qt/lib /usr/lib/qt /usr/lib /usr/X11R6/lib/X11/qt
/usr/X11R6/lib/qt /usr/lib/qt3/lib /usr/lib/qt/lib /usr/share/qt3/lib /usr/local/lib/qt3
$x_libraries"
else
qt_incdirs="$QTINC /usr/local/qt/include /usr/include/qt /usr/include
/usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/lib64/qt3/include /usr/lib64/qt/include
/usr/share/qt3/include /usr/lib/qt3/include /usr/lib/qt/include /usr/local/include/X11/qt3
$x_includes"
qt_libdirs="$QTLIB /usr/local/qt/lib64 /usr/lib64/qt /usr/lib64 /usr/X11R6/lib64/X11/qt
/usr/X11R6/lib64/qt /usr/lib64/qt3/lib64 /usr/lib64/qt/lib64 /usr/share/qt3/lib64 /usr/local/qt/lib
/usr/lib/qt /usr/lib /usr/X11R6/lib/X11/qt /usr/X11R6/lib/qt /usr/lib/qt3/lib /usr/lib/qt/lib
/usr/share/qt3/lib /usr/local/lib/qt3 $x_libraries"
fi
if test -n "$QTDIR" ; then
qt_incdirs="$QTDIR/include $qt_incdirs"
if test "$build_cpu" != "x86_64" ; then
qt_libdirs="$QTDIR/lib $qt_libdirs"
else
qt_libdirs="$QTDIR/lib64 $QTDIR/lib $qt_libdirs"
fi
fi
if test "$build_cpu" != "x86_64" ; then
kde_incdirs="/usr/lib/kde/include /usr/local/kde/include /usr/local/include
/usr/kde/include /usr/include/kde /opt/kde3/include /opt/kde/include $x_includes"
kde_libdirs="/usr/lib/kde/lib /usr/local/kde/lib /usr/kde/lib /usr/lib/kde /usr/lib/kde3
/usr/X11R6/lib /usr/local/lib /opt/kde3/lib /opt/kde/lib /usr/X11R6/kde/lib /usr/lib $x_libraries"
else
kde_incdirs="/usr/lib64/kde/include /usr/lib/kde/include /usr/local/kde/include
/usr/local/include /usr/kde/include /usr/include/kde /opt/kde3/include /opt/kde/include $x_includes"
kde_libdirs="/usr/lib64/kde/lib64 /usr/local/kde/lib64 /usr/kde/lib64 /usr/lib64/kde
/usr/lib64/kde3 /usr/X11R6/lib64 /usr/local/lib64 /opt/kde3/lib64 /opt/kde/lib64
/usr/X11R6/kde/lib64 /usr/lib/kde/lib /usr/local/kde/lib /usr/kde/lib /usr/lib/kde /usr/lib/kde3
/usr/lib /usr/X11R6/lib /usr/local/lib /opt/kde3/lib /opt/kde/lib /usr/X11R6/kde/lib /usr/lib64
$x_libraries"
fi
if test -n "$KDEDIR" ; then
kde_incdirs="$KDEDIR/include $kde_incdirs"
if test "$build_cpu" != "x86_64" ; then
kde_libdirs="$KDEDIR/lib $kde_libdirs"
else
kde_libdirs="$KDEDIR/lib64 $KDEDIR/lib $kde_libdirs"
fi
fi
dnl What to test
qt_test_include="qstyle.h"
qt_test_library="libqt-mt.so*"
kde_test_include="kapp.h"
kde_test_library="libDCOP.so*"
dnl Check for Qt3 headers
AC_MSG_CHECKING([for Qt3 headers])
qt_incdir="no"
for kde_check in $qt_incdirs ; do
if test -r "$kde_check/$qt_test_include" ; then
qt_incdir="$kde_check"
break
fi
done
AC_MSG_RESULT([$qt_incdir])
if test "x$qt_incdir" = "xno" ; then
AC_MSG_ERROR([Qt3 headers not found. Please specify the root of
your Qt3 installation by exporting QTDIR before running "configure".])
fi
dnl Check for Qt3 libraries
AC_MSG_CHECKING([for Qt3 libraries])
qt_libdir="no"
for qt_check in $qt_libdirs ; do
if test -r "`ls $qt_check/$qt_test_library 2>/dev/null | head -1`" ; then
qt_libdir="$qt_check"
break
fi
done
AC_MSG_RESULT([$qt_libdir])
if test "x$qt_libdir" = "xno" ; then
AC_MSG_ERROR([Qt3 libraries not found. Please specify the root of
your Qt3 installation by exporting QTDIR before running "configure".])
fi
dnl Check for Meta Object Compiler
AC_PATH_PROG( MOC, moc, no, [`dirname $qt_libdir`/bin:$QTDIR/bin:$PATH] )
if test "$MOC" = "no" ; then
AC_MSG_ERROR([Qt3 Meta Object Compiler not found. Please specify
the root of your Qt3 installation by exporting QTDIR before running "configure".])
fi
dnl Check for KDE3 headers
AC_MSG_CHECKING([for KDE3 headers])
kde_incdir="no"
for kde_check in $kde_incdirs ; do
if test -r "$kde_check/$kde_test_include" ; then
kde_incdir="$kde_check"
break
fi
done
AC_MSG_RESULT([$kde_incdir])
if test "x$kde_incdir" = "xno" ; then
AC_MSG_ERROR([KDE3 headers not found. Please specify the root of
your KDE3 installation by exporting KDEDIR before running "configure".])
fi
dnl Check for KDE3 libraries
AC_MSG_CHECKING([for KDE3 libraries])
kde_libdir="no"
for kde_check in $kde_libdirs ; do
if test -r "`ls $kde_check/$kde_test_library 2>/dev/null | head -1`" ; then
kde_libdir="$kde_check"
break
fi
done
AC_MSG_RESULT([$kde_libdir])
if test "x$kde_libdir" = "xno" ; then
AC_MSG_ERROR([KDE3 libraries not found. Please specify the root of
your KDE3 installation by exporting KDEDIR before running "configure".])
fi
dnl Set the variables
KDE_CFLAGS="-I$qt_incdir -I$kde_incdir -DQT_CLEAN_NAMESPACE -DQT_THREAD_SUPPORT"
KDE_LIBS="-L$kde_libdir -L$qt_libdir -lkdeui -lkdecore -lqt-mt"
fi
AC_SUBST(KDE_CFLAGS)
AC_SUBST(KDE_LIBS)
AC_SUBST(MOC)
dnl ===================================================================
dnl KDE4 Integration
dnl ===================================================================
KDE4_CFLAGS=""
KDE4_LIBS=""
MOC4="moc"
KDE_GLIB_CFLAGS=""
KDE_GLIB_LIBS=""
KDE_HAVE_GLIB=""
if test "$test_kde4" = "yes" -a "$ENABLE_KDE4" = "TRUE" ; then
qt_incdirs="$QT4INC /usr/include/qt4 /usr/include $x_includes"
qt_libdirs="$QT4LIB /usr/lib $x_libraries"
kde_incdirs="/usr/include $x_includes"
kde_libdirs="/usr/lib $x_libraries"
if test "$build_cpu" = "x86_64" ; then
qt_libdirs="$qt_libdirs /usr/lib64/qt4 /usr/lib64/qt /usr/lib64"
kde_libdirs="$kde_libdirs /usr/lib64 /usr/lib64/kde4"
fi
if test -n "$QTDIR" ; then
qt_incdirs="$QTDIR/include $qt_incdirs"
if test "$build_cpu" != "x86_64" ; then
qt_libdirs="$QTDIR/lib $qt_libdirs"
else
qt_libdirs="$QTDIR/lib64 $QTDIR/lib $qt_libdirs"
fi
fi
if test -n "$QT4DIR" ; then
qt_incdirs="$QT4DIR/include $qt_incdirs"
if test "$build_cpu" != "x86_64" ; then
qt_libdirs="$QT4DIR/lib $qt_libdirs"
else
qt_libdirs="$QT4DIR/lib64 $QT4DIR/lib $qt_libdirs"
fi
fi
if test -n "$KDEDIR" ; then
kde_incdirs="$KDEDIR/include $kde_incdirs"
if test "$build_cpu" != "x86_64" ; then
kde_libdirs="$KDEDIR/lib $kde_libdirs"
else
kde_libdirs="$KDEDIR/lib64 $KDEDIR/lib $kde_libdirs"
fi
fi
if test -n "$KDE4DIR" ; then
kde_incdirs="$KDE4DIR/include $kde_incdirs"
if test "$build_cpu" != "x86_64" ; then
kde_libdirs="$KDE4DIR/lib $kde_libdirs"
else
kde_libdirs="$KDE4DIR/lib64 $KDE4DIR/lib $kde_libdirs"
fi
fi
qt_test_include="Qt/qobject.h"
qt_test_library="libQtCore.so"
kde_test_include="kwindowsystem.h"
kde_test_library="libsolid.so"
AC_MSG_CHECKING([for Qt4 headers])
qt_header_dir="no"
for inc_dir in $qt_incdirs ; do
if test -r "$inc_dir/$qt_test_include" ; then
qt_header_dir="$inc_dir"
break
fi
done
AC_MSG_RESULT([$qt_header_dir])
if test "x$qt_header_dir" = "xno" ; then
AC_MSG_ERROR([Qt4 headers not found. Please specify the root of your Qt4 installation by
exporting QT4DIR before running "configure".])
fi
AC_MSG_CHECKING([for Qt4 libraries])
qt_lib_dir="no"
for lib_dir in $qt_libdirs ; do
if test -r "$lib_dir/$qt_test_library" ; then
qt_lib_dir="$lib_dir"
PKG_CONFIG_PATH="$qt_lib_dir"/pkgconfig:$PKG_CONFIG_PATH
break
fi
done
AC_MSG_RESULT([$qt_lib_dir])
if test "x$qt_lib_dir" = "xno" ; then
AC_MSG_ERROR([Qt4 libraries not found. Please specify the root of your Qt4 installation by
exporting QT4DIR before running "configure".])
fi
dnl Check for Meta Object Compiler
AC_PATH_PROG( MOC4, moc, no, [`dirname $qt_lib_dir`/bin:$PATH:$QT4DIR/bin] )
if test "$MOC4" = "no" ; then
AC_MSG_ERROR([Qt Meta Object Compiler not found. Please specify
the root of your Qt installation by exporting QT4DIR before running "configure".])
fi
dnl Check for KDE4 headers
AC_MSG_CHECKING([for KDE4 headers])
kde_incdir="no"
for kde_check in $kde_incdirs ; do
if test -r "$kde_check/$kde_test_include" ; then
kde_incdir="$kde_check"
break
fi
done
AC_MSG_RESULT([$kde_incdir])
if test "x$kde_incdir" = "xno" ; then
AC_MSG_ERROR([KDE4 headers not found. Please specify the root of your KDE4 installation by
exporting KDE4DIR before running "configure".])
fi
dnl Check for KDE4 libraries
AC_MSG_CHECKING([for KDE4 libraries])
kde_libdir="no"
for kde_check in $kde_libdirs ; do
if test -r "$kde_check/$kde_test_library" ; then
kde_libdir="$kde_check"
break
fi
done
AC_MSG_RESULT([$kde_libdir])
if test "x$kde_libdir" = "xno" ; then
AC_MSG_ERROR([KDE4 libraries not found. Please specify the root of your KDE4 installation by
exporting KDE4DIR before running "configure".])
fi
KDE4_CFLAGS="`pkg-config --cflags QtCore` `pkg-config --cflags QtGui` -I$kde_incdir
-DQT_CLEAN_NAMESPACE -DQT_THREAD_SUPPORT"
KDE4_LIBS="-L$kde_libdir -L$qt_lib_dir -lkdeui -lkdecore -lQtCore -lQtGui"
# Glib is needed for properly handling Qt event loop with Qt's Glib integration enabled
PKG_CHECK_MODULES(KDE_GLIB,[glib-2.0 >= 2.4],
[KDE_HAVE_GLIB=1],
AC_MSG_WARN([[No Glib found, KDE4 support will not integrate with Qt's Glib event loop
support]]))
fi
AC_SUBST(KDE4_CFLAGS)
AC_SUBST(KDE4_LIBS)
AC_SUBST(MOC4)
AC_SUBST(KDE_GLIB_CFLAGS)
AC_SUBST(KDE_GLIB_LIBS)
AC_SUBST(KDE_HAVE_GLIB)
dnl ===================================================================
dnl Test for the enabling the lockdown pieces
dnl ===================================================================
AC_MSG_CHECKING([whether to enable the lockdown pieces])
ENABLE_LOCKDOWN=""
if test -n "$enable_lockdown" && test "$enable_lockdown" != "no"; then
ENABLE_LOCKDOWN=YES
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_LOCKDOWN)
dnl ===================================================================
dnl Test whether to include Evolution 2 support
dnl ===================================================================
AC_MSG_CHECKING([whether to enable evolution 2 support])
if test "$enable_evolution2" = "yes" -o "$enable_evolution2" = "TRUE"; then
AC_MSG_RESULT([yes])
PKG_CHECK_MODULES(GOBJECT, gobject-2.0)
ENABLE_EVOAB2="TRUE"
else
ENABLE_EVOAB2=""
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_EVOAB2)
AC_SUBST(GOBJECT_CFLAGS)
AC_SUBST(GOBJECT_LIBS)
dnl ===================================================================
dnl Test whether to include KDE AB support
dnl ===================================================================
AC_MSG_CHECKING([whether to enable KDE address book support])
if test "$enable_kdeab" = "yes" && test "$enable_kde" = "yes"; then
AC_MSG_RESULT([yes])
AC_LANG_PUSH([C++])
save_CXXFLAGS=$CXXFLAGS
CXXFLAGS="$CXXFLAGS $KDE_CFLAGS"
AC_MSG_CHECKING([whether KDE is between 3.2 and 3.6])
AC_TRY_RUN([
#include <kdeversion.h>
int main(int argc, char **argv) {
if (KDE_VERSION_MAJOR == 3 && 2 <= KDE_VERSION_MINOR && KDE_VERSION_MINOR <= 6) return 0;
else return 1;
}
], [AC_MSG_RESULT([yes])], [AC_MSG_ERROR([KDE version too old or too recent, please use
another version of KDE or disable KDE address book support])])
CXXFLAGS=$save_CXXFLAGS
AC_LANG_POP([C++])
ENABLE_KAB=TRUE
else
AC_MSG_RESULT([no])
ENABLE_KAB=
fi
AC_SUBST(ENABLE_KAB)
dnl ===================================================================
dnl Test whether to include MathMLDTD
dnl ===================================================================
AC_MSG_CHECKING([whether to include MathMLDTD])
if test -n "$enable_mathmldtd"; then
if test "$enable_mathmldtd" = "no"; then
AC_MSG_RESULT([no])
SCPDEFS="$SCPDEFS -DWITHOUT_MATHMLDTD"
else
AC_MSG_RESULT([yes])
BUILD_TYPE="$BUILD_TYPE MATHMLDTD"
fi
else
AC_MSG_RESULT([no])
SCPDEFS="$SCPDEFS -DWITHOUT_MATHMLDTD"
fi
dnl ===================================================================
dnl Test whether to integrate extensions into the product's installer
dnl ===================================================================
AC_MSG_CHECKING([for extensions integration])
if test "z$with_extension_integration" = "z" -o "z$with_extension_integration" = "zno" ; then
WITH_EXTENSION_INTEGRATION=NO
AC_MSG_RESULT([no integration])
else
WITH_EXTENSION_INTEGRATION=YES
SCPDEFS="$SCPDEFS -DWITH_EXTENSION_INTEGRATION"
AC_MSG_RESULT([integration])
fi
AC_SUBST(WITH_EXTENSION_INTEGRATION)
dnl ===================================================================
dnl Test whether to include Lightproof extensions
dnl ===================================================================
AC_MSG_CHECKING([for Lightproof extensions integration (only supported languages displayed)])
if test "z$enable_ext_lightproof" = "z" -o "z$enable_ext_lightproof" = "zno" ; then
LIGHTPROOF_LANG=""
AC_MSG_RESULT([no integration])
else
SCPDEFS="$SCPDEFS -DWITH_EXTENSION_LIGHTPROOF"
lightproof_supported_langs="hu"
if test "z$enable_ext_lightproof" = "zyes" ; then
wanted_lightproof="$lightproof_supported_langs"
else
# check whether the langs are supported by Lightproof
wanted_lightproof=
for lang in $enable_ext_lightproof ; do
if test -n "`echo $lightproof_supported_langs | grep "$lang"`" ; then
wanted_lightproof="$wanted_lightproof $lang"
fi
done
fi
LIGHTPROOF_LANG=
# check whether the langs are requested at all
for lang in $wanted_lightproof ; do
if test "$with_lang" = "ALL" -o -n "`echo $with_lang | grep "$lang"`" ; then
LIGHTPROOF_LANG="$LIGHTPROOF_LANG $lang"
fi
done
AC_MSG_RESULT([$LIGHTPROOF_LANG])
fi
AC_SUBST(LIGHTPROOF_LANG)
dnl ===================================================================
dnl Test whether to include Watch Window extension
dnl ===================================================================
AC_MSG_CHECKING([for Watch Window extension integration])
if test "z$enable_ext_watch_window" = "z" -o "z$enable_ext_watch_window" = "zno" ; then
AC_MSG_RESULT([no])
else
AC_MSG_RESULT([yes])
SCPDEFS="$SCPDEFS -DWITH_EXTENSION_WATCH_WINDOW"
fi
AC_SUBST(WITH_WATCH_WINDOW_EXTENSION)
dnl ===================================================================
dnl Test whether to include Diagram extension
dnl ===================================================================
AC_MSG_CHECKING([for Diagram extension integration])
if test "z$enable_ext_diagram" = "z" -o "z$enable_ext_diagram" = "zno" ; then
AC_MSG_RESULT([no])
else
AC_MSG_RESULT([yes])
SCPDEFS="$SCPDEFS -DWITH_EXTENSION_DIAGRAM"
fi
AC_SUBST(WITH_DIAGRAM_EXTENSION)
dnl ===================================================================
dnl Test whether to include Validator extension
dnl ===================================================================
AC_MSG_CHECKING([for Validator extension integration])
if test "z$enable_ext_validator" = "z" -o "z$enable_ext_validator" = "zno" ; then
AC_MSG_RESULT([no])
else
AC_MSG_RESULT([yes])
SCPDEFS="$SCPDEFS -DWITH_EXTENSION_VALIDATOR"
fi
AC_SUBST(WITH_VALIDATOR_EXTENSION)
dnl ===================================================================
dnl Test whether to include Barcode extension
dnl ===================================================================
AC_MSG_CHECKING([for Barcode extension integration])
if test "z$enable_ext_barcode" = "z" -o "z$enable_ext_barcode" = "zno" ; then
AC_MSG_RESULT([no])
else
AC_MSG_RESULT([yes])
SCPDEFS="$SCPDEFS -DWITH_EXTENSION_BARCODE"
fi
AC_SUBST(WITH_BARCODE_EXTENSION)
dnl ===================================================================
dnl Test whether to include ConvertTextToNumber extension
dnl ===================================================================
AC_MSG_CHECKING([for ConvertTextToNumber extension integration])
if test "z$with_ct2n" = "z" -o "z$with_ct2n" = "zno" ; then
AC_MSG_RESULT([no])
else
AC_MSG_RESULT([yes])
BUILD_TYPE="$BUILD_TYPE CT2N"
SCPDEFS="$SCPDEFS -DWITH_EXTENSION_CT2N"
fi
dnl ===================================================================
dnl Test whether to include Numbertext extension
dnl ===================================================================
AC_MSG_CHECKING([for Numbertext extension integration])
if test "z$enable_ext_numbertext" = "z" -o "z$enable_ext_numbertext" = "zno" ; then
AC_MSG_RESULT([no])
else
AC_MSG_RESULT([yes])
SCPDEFS="$SCPDEFS -DWITH_EXTENSION_NUMBERTEXT"
fi
AC_SUBST(WITH_NUMBERTEXT_EXTENSION)
dnl ===================================================================
dnl Test whether to include Hungarian Cross-reference Toolbar extension
dnl ===================================================================
AC_MSG_CHECKING([for Hungarian Cross-reference Toolbar extension integration])
if test "z$enable_ext_hunart" = "z" -o "z$enable_ext_hunart" = "zno" ; then
AC_MSG_RESULT([no])
else
AC_MSG_RESULT([yes])
SCPDEFS="$SCPDEFS -DWITH_EXTENSION_HUNART"
fi
AC_SUBST(WITH_HUNART_EXTENSION)
dnl ===================================================================
dnl Test whether to include Typography Toolbar extension
dnl ===================================================================
AC_MSG_CHECKING([for Typography Toolbar extension integration])
if test "z$enable_ext_typo" = "z" -o "z$enable_ext_typo" = "zno" ; then
AC_MSG_RESULT([no])
else
AC_MSG_RESULT([yes])
SCPDEFS="$SCPDEFS -DWITH_EXTENSION_TYPO"
fi
AC_SUBST(WITH_TYPO_EXTENSION)
dnl ===================================================================
dnl Test whether to include Google Docs extension
dnl ===================================================================
AC_MSG_CHECKING([for Google Docs extension integration])
if test "z$enable_ext_google_docs" = "z" -o "z$enable_ext_google_docs" = "zno" ; then
AC_MSG_RESULT([no])
else
AC_MSG_RESULT([yes])
SCPDEFS="$SCPDEFS -DWITH_EXTENSION_GOOGLE_DOCS"
fi
dnl ===================================================================
dnl Test whether to include NLPSolver extension
dnl ===================================================================
AC_MSG_CHECKING([for NLPSolver extension integration])
if test "z$enable_ext_nlpsolver" = "z" -o "z$enable_ext_nlpsolver" = "zno" ; then
AC_MSG_RESULT([no])
else
AC_MSG_RESULT([yes])
BUILD_TYPE="$BUILD_TYPE NLPSOLVER"
SCPDEFS="$SCPDEFS -DWITH_EXTENSION_NLPSOLVER"
fi
dnl ===================================================================
dnl Test whether to include LanguageTool extension
dnl ===================================================================
AC_MSG_CHECKING([for LanguageTool extension integration])
if test "z$with_languagetool" = "z" -o "z$with_languagetool" = "zno" ; then
AC_MSG_RESULT([no])
else
AC_MSG_RESULT([yes])
BUILD_TYPE="$BUILD_TYPE LANGUAGETOOL"
SCPDEFS="$SCPDEFS -DWITH_EXTENSION_LANGUAGETOOL"
fi
dnl ===================================================================
dnl Test whether to include oooblogger extension
dnl ===================================================================
AC_MSG_CHECKING([for oooblogger extension integration])
if test "z$enable_ext_oooblogger" = "z" -o "z$enable_ext_oooblogger" = "zno" ; then
AC_MSG_RESULT([no])
else
AC_MSG_RESULT([yes])
SCPDEFS="$SCPDEFS -DWITH_EXTENSION_OOOBLOGGER"
fi
dnl ===================================================================
dnl Test whether to include Sun Professional Template Pack
dnl ===================================================================
AC_MSG_CHECKING([for Sun Professional Template Pack integration (only supported languages
displayed)])
if test "z$with_sun_templates" = "z" -o "z$with_sun_templates" = "zno" ; then
SUNTEMPLATES_LANG=""
AC_MSG_RESULT([no integration])
else
SCPDEFS="$SCPDEFS -DWITH_EXTENSION_SUN_TEMPLATE_PACK"
sun_supported_langs="en-US de it fr es hu"
if test "z$with_sun_templates" = "zyes" ; then
wanted_sun_templates="$sun_supported_langs"
else
# check whether the langs are supported by Sun
wanted_sun_templates=
for lang in $with_sun_templates ; do
if test -n "`echo $sun_supported_langs | grep "$lang"`" ; then
wanted_sun_templates="$wanted_sun_templates $lang"
fi
done
fi
SUNTEMPLATES_LANG=
# check whether the langs are requested at all
for lang in $wanted_sun_templates ; do
if test "$with_lang" = "ALL" -o -n "`echo $with_lang | grep "$lang"`" ; then
SUNTEMPLATES_LANG="$SUNTEMPLATES_LANG $lang"
fi
done
AC_MSG_RESULT([$SUNTEMPLATES_LANG])
fi
AC_SUBST(SUNTEMPLATES_LANG)
dnl ===================================================================
dnl Test whether to include fonts
dnl ===================================================================
AC_MSG_CHECKING([whether to include third-party fonts])
if test "$with_fonts" != "no" ; then
AC_MSG_RESULT([yes])
WITH_FONTS=YES
BUILD_TYPE="$BUILD_TYPE MORE_FONTS"
else
AC_MSG_RESULT([no])
WITH_FONTS=NO
SCPDEFS="$SCPDEFS -DWITHOUT_FONTS"
fi
AC_SUBST(WITH_FONTS)
dnl ===================================================================
dnl Test whether to include ppds
dnl ===================================================================
AC_MSG_CHECKING([whether to include PPDs])
if test "$with_ppds" != "no"; then
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
WITHOUT_PPDS=YES
SCPDEFS="$SCPDEFS -DWITHOUT_PPDS"
fi
AC_SUBST(WITHOUT_PPDS)
dnl ===================================================================
dnl Test whether to include afms
dnl ===================================================================
AC_MSG_CHECKING([whether to include AFMs])
if test "$with_afms" != "no"; then
AC_MSG_RESULT([yes])
BUILD_TYPE="$BUILD_TYPE AFMS"
else
AC_MSG_RESULT([no])
WITHOUT_AFMS=YES
SCPDEFS="$SCPDEFS -DWITHOUT_AFMS"
fi
AC_SUBST(WITHOUT_AFMS)
dnl ===================================================================
dnl Test whether to include extra galleries
dnl ===================================================================
AC_MSG_CHECKING([whether to include extra galleries])
if test "z$enable_extra_gallery" = "z" -o "z$enable_extra_gallery" = "zno" ; then
AC_MSG_RESULT([no])
WITH_EXTRA_GALLERY=NO
else
AC_MSG_RESULT([yes])
WITH_EXTRA_GALLERY=YES
BUILD_TYPE="$BUILD_TYPE EXTRA_GALLERY"
SCPDEFS="$SCPDEFS -DWITH_EXTRA_GALLERY"
fi
AC_SUBST(WITH_EXTRA_GALLERY)
dnl ===================================================================
dnl Test whether to include extra templates
dnl ===================================================================
AC_MSG_CHECKING([whether to include extra templates])
if test "z$enable_extra_template" = "z" -o "z$enable_extra_template" = "zno" ; then
AC_MSG_RESULT([no])
WITH_EXTRA_TEMPLATE=NO
else
AC_MSG_RESULT([yes])
WITH_EXTRA_TEMPLATE=YES
BUILD_TYPE="$BUILD_TYPE EXTRA_TEMPLATE"
SCPDEFS="$SCPDEFS -DWITH_EXTRA_TEMPLATE"
fi
AC_SUBST(WITH_EXTRA_TEMPLATE)
dnl ===================================================================
dnl Test whether to include extra samples
dnl ===================================================================
AC_MSG_CHECKING([whether to include extra samples])
if test "z$enable_extra_sample" = "z" -o "z$enable_extra_sample" = "zno" ; then
AC_MSG_RESULT([no])
WITH_EXTRA_SAMPLE=NO
else
AC_MSG_RESULT([yes])
WITH_EXTRA_SAMPLE=YES
BUILD_TYPE="$BUILD_TYPE EXTRA_SAMPLE"
SCPDEFS="$SCPDEFS -DWITH_EXTRA_SAMPLE"
fi
AC_SUBST(WITH_EXTRA_SAMPLE)
dnl ===================================================================
dnl Test whether to include extra fonts
dnl ===================================================================
AC_MSG_CHECKING([whether to include extra fonts])
if test "z$enable_extra_font" = "z" -o "z$enable_extra_font" = "zno" ; then
AC_MSG_RESULT([no])
WITH_EXTRA_FONT=NO
else
AC_MSG_RESULT([yes])
WITH_EXTRA_FONT=YES
BUILD_TYPE="$BUILD_TYPE EXTRA_FONT"
SCPDEFS="$SCPDEFS -DWITH_EXTRA_FONT"
fi
AC_SUBST(WITH_EXTRA_FONT)
AC_SUBST(SCPDEFS)
if test "$_os" = "WINNT"; then
AC_MSG_CHECKING([whether to enable ActiveX embedding of LibO components])
if test "$enable_activex_component" = "yes" -o "$enable_activex_component" = "TRUE" -o
"$enable_activex_component" = ""; then
ENABLE_ACTIVEX_COMPONENT="TRUE"
AC_MSG_RESULT([yes])
SCPDEFS="$SCPDEFS -DWITH_ACTIVEX_COMPONENT"
else
ENABLE_ACTIVEX_COMPONENT=""
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_ACTIVEX_COMPONENT)
AC_SUBST(SCPDEFS)
fi
AC_MSG_CHECKING([whether and how to use Xinerama])
if test "$_os" = "Darwin"; then
USE_XINERAMA=YES
XINERAMA_LINK=dynamic
AC_MSG_RESULT([yes])
elif test "$_os" = "Linux" -o "$_os" = "FreeBSD"; then
if test -e "$XLIB/libXinerama.so" -a -e "$XLIB/libXinerama.a"; then
# we have both versions, let the user decide but use the dynamic one
# per default
USE_XINERAMA=YES
if test -z "$with_static_xinerama" -o -n "$with_system_libs"; then
XINERAMA_LINK=dynamic
else
XINERAMA_LINK=static
fi
elif test -e "$XLIB/libXinerama.so" -a ! -e "$XLIB/libXinerama.a"; then
# we have only the dynamic version
USE_XINERAMA=YES
XINERAMA_LINK=dynamic
elif test -e "$XLIB/libXinerama.a"; then
# static version
if echo $build_cpu | grep -E 'i[[3456]]86' 2>/dev/null >/dev/null; then
USE_XINERAMA=YES
XINERAMA_LINK=static
else
USE_XINERAMA=NO
XINERAMA_LINK=none
fi
else
# no Xinerama
USE_XINERAMA=NO
XINERAMA_LINK=none
fi
if test "$USE_XINERAMA" = "YES"; then
AC_MSG_RESULT([yes, with $XINERAMA_LINK linking])
AC_CHECK_HEADER(X11/extensions/Xinerama.h, [],
[AC_MSG_ERROR(Xinerama header not found.)], [])
XINERAMA_EXTRA_LIBS="-L$XLIB -lXext"
if test "$_os" = "FreeBSD"; then
XINERAMA_EXTRA_LIBS="$XINERAMA_EXTRA_LIBS -lXt"
fi
if test "$_os" = "Linux"; then
XINERAMA_EXTRA_LIBS="$XINERAMA_EXTRA_LIBS -ldl"
fi
AC_CHECK_LIB(Xinerama, XineramaIsActive, [],
[AC_MSG_ERROR(Xinerama not functional?)], [$XINERAMA_EXTRA_LIBS])
else
AC_MSG_RESULT([no, libXinerama not found or wrong architecture.])
fi
else
USE_XINERAMA=NO
XINERAMA_LINK=none
AC_MSG_RESULT([no])
fi
AC_SUBST(USE_XINERAMA)
AC_SUBST(XINERAMA_LINK)
dnl ===================================================================
dnl Test for the presence of Ant and that it works
dnl ===================================================================
if test "$SOLAR_JAVA" != ""; then
ANT_HOME=; export ANT_HOME
WITH_ANT_HOME=; export WITH_ANT_HOME
if test -z "$with_ant_home"; then
AC_PATH_PROGS(ANT, [jakarta-ant ant ant.sh ant.bat ant.cmd])
else
if test "$_os" = "WINNT"; then
with_ant_home=`cygpath -u "$with_ant_home"`
fi
AC_PATH_PROGS(ANT, [jakarta-ant ant ant.sh ant.bat ant.cmd],,$with_ant_home/bin:$PATH)
WITH_ANT_HOME=$with_ant_home
ANT_HOME=$with_ant_home
fi
if test -z "$ANT"; then
AC_MSG_ERROR([Ant not found - Make sure it's in the path or use --with-ant-home])
else
# resolve relative or absolute symlink
while test -h "$ANT"; do
a_cwd=`pwd`
a_basename=`basename "$ANT"`
a_script=`ls -l "$ANT" | $SED "s/.*${a_basename} -> //g"`
cd "`dirname "$ANT"`"
cd "`dirname "$a_script"`"
ANT="`pwd`"/"`basename "$a_script"`"
cd "$a_cwd"
done
if test "$_os" = "OS2"; then
ANT_HOME=`echo $ANT | $SED -n "s/\/bin\/ant.*\$//p"`
export ANT_HOME
fi
AC_MSG_CHECKING([if $ANT works])
cat > conftest.java << EOF
public class conftest {
int testmethod(int a, int b) {
return a + b;
}
}
EOF
cat > conftest.xml << EOF
<project name="conftest" default="conftest">
<target name="conftest">
<javac srcdir="." includes="conftest.java">
</javac>
</target>
</project>
EOF
oldJAVA_HOME=$JAVA_HOME
if test "$JAVACISGCJ" = "yes"; then
JAVA_HOME=; export JAVA_HOME
ant_cmd="$ANT -Dbuild.compiler=gcj -buildfile conftest.xml 1>&2"
else
ant_cmd="$ANT -buildfile conftest.xml 1>&2"
fi
AC_TRY_EVAL(ant_cmd)
if test $? = 0 && test -f ./conftest.class ; then
AC_MSG_RESULT([Ant works])
if test -z "$WITH_ANT_HOME"; then
ANT_HOME=`$ANT -diagnostics | $EGREP "ant.home :" | $SED -e "s#ant.home : ##g"`
if test -z "$ANT_HOME"; then
ANT_HOME=`echo $ANT | $SED -n "s/\/bin\/ant.*\$//p"`
fi
else
ANT_HOME="$WITH_ANT_HOME"
fi
else
echo "configure: Ant test failed" >&5
cat conftest.java >&5
cat conftest.xml >&5
AC_MSG_WARN([Ant does not work - Some Java projects will not build!])
ANT_HOME=""
echo "Ant does not work - Some Java projects will not build!" >>warn
fi
JAVA_HOME=$oldJAVA_HOME
rm -f conftest* core core.* *.core
fi
if test -z "$ANT_HOME"; then
ANT_HOME="NO_ANT_HOME"
fi
AC_SUBST(ANT_HOME)
dnl Checking for ant.jar
if test "$ANT_HOME" != "NO_ANT_HOME"; then
AC_MSG_CHECKING([Ant lib directory])
if test -f $ANT_HOME/lib/ant.jar; then
ANT_LIB="$ANT_HOME/lib"
else
if test -f $ANT_HOME/ant.jar; then
ANT_LIB="$ANT_HOME"
else
if test -f /usr/share/java/ant.jar; then
ANT_LIB=/usr/share/java
else
if test -f /usr/share/ant-core/lib/ant.jar; then
ANT_LIB=/usr/share/ant-core/lib
else
if test -f $ANT_HOME/lib/ant/ant.jar; then
ANT_LIB="$ANT_HOME/lib/ant"
else
AC_MSG_ERROR([Ant libraries not found!])
fi
fi
fi
fi
fi
AC_MSG_RESULT([Ant lib directory found.])
fi
AC_SUBST(ANT_LIB)
ant_minver=1.6.0
# update for more extensions...
if test "$ENABLE_MEDIAWIKI" = "YES"; then
ant_minver=1.7.0
fi
ant_minminor1=`echo $ant_minver | cut -d"." -f2`
AC_MSG_CHECKING([whether ant is >= $ant_minver])
ant_version=`$ANT -version | $AWK '{ print $4; }'`
ant_version_major=`echo $ant_version | cut -d. -f1`
ant_version_minor=`echo $ant_version | cut -d. -f2`
echo "configure: ant_version $ant_version " >&5
echo "configure: ant_version_major $ant_version_major " >&5
echo "configure: ant_version_minor $ant_version_minor " >&5
if test "$ant_version_major" -ge "2"; then
AC_MSG_RESULT([yes, $ant_version])
elif test "$ant_version_major" = "1" && test "$ant_version_minor" -ge "$ant_minminor1"; then
AC_MSG_RESULT([yes, $ant_version])
else
AC_MSG_ERROR([no, you need at least ant >= $ant_minver])
fi
if test "$ENABLE_MEDIAWIKI" = "YES"; then
AC_MSG_CHECKING([whether ant supports mapper type="regexp"])
rm -rf confdir
mkdir confdir
cat > conftest.java << EOF
public class conftest {
int testmethod(int a, int b) {
return a + b;
}
}
EOF
cat > conftest.xml << EOF
<project name="conftest" default="conftest">
<target name="conftest" depends="copytest">
<javac srcdir="." includes="conftest.java">
</javac>
</target>
<target name="copytest">
<copy todir="confdir">
<fileset dir="confdir" includes="**/*.abc" casesensitive="yes"/>
<filterset/>
<mapper type="regexp" from="^(.*[/\\])foo([/\\].*)" to="\1baa\2"/>
</copy>
</target>
</project>
EOF
if test "$JAVACISGCJ" = "yes"; then
JAVA_HOME=; export JAVA_HOME
ant_cmd="$ANT -Dbuild.compiler=gcj -buildfile conftest.xml 1>&2"
else
ant_cmd="$ANT -buildfile conftest.xml 1>&2"
fi
AC_TRY_EVAL(ant_cmd)
if test $? = 0 && test -f ./conftest.class ; then
AC_MSG_RESULT([yes])
rm -rf confdir
else
echo "configure: Ant test failed" >&5
cat conftest.java >&5
cat conftest.xml >&5
rm -rf confdir
AC_MSG_ERROR([no. Did you install ant-apache-regexp?])
fi
fi
rm -f conftest* core core.* *.core
fi
OOO_JUNIT_JAR=
if test "$SOLAR_JAVA" != "" && test "$with_junit" != "no"; then
AC_MSG_CHECKING([for JUnit 4])
if test "$with_junit" = "yes"; then
if test -e /usr/share/java/junit4.jar; then
OOO_JUNIT_JAR=/usr/share/java/junit4.jar
else
OOO_JUNIT_JAR=/usr/share/java/junit.jar
fi
else
OOO_JUNIT_JAR=$with_junit
fi
if test "$_os" = "WINNT"; then
OOO_JUNIT_JAR=`cygpath -m "$OOO_JUNIT_JAR"`
fi
"$JAVA_HOME/bin/jar" tf "$OOO_JUNIT_JAR" 2>&5 | \
grep org/junit/Before.class > /dev/null 2>&5
if test $? -eq 0; then
AC_MSG_RESULT([$OOO_JUNIT_JAR])
else
AC_MSG_RESULT([no])
AC_MSG_ERROR([cannot find JUnit 4 jar; please install one in the default
location (/usr/share/java), specify its pathname via
--with-junit=..., or disable it via --without-junit])
fi
fi
AC_SUBST(OOO_JUNIT_JAR)
dnl ===================================================================
dnl Dealing with l10n options
dnl ===================================================================
GIT_REPO_NAMES="artwork base calc components extensions extras filters
help impress libs-core libs-extern libs-extern-sys libs-gui
postprocess sdk testing ure writer"
AC_MSG_CHECKING([which languages to be built])
WITH_LANG="$with_lang"
if test -z "$WITH_LANG"; then
AC_MSG_RESULT([en-US])
else
AC_MSG_RESULT([$WITH_LANG])
GIT_REPO_NAMES="$GIT_REPO_NAMES l10n"
fi
AC_SUBST(WITH_LANG)
AC_SUBST(GIT_REPO_NAMES)
AC_MSG_CHECKING([which languages have poor help localizations])
WITH_POOR_HELP_LOCALIZATIONS="$with_poor_help_localizations"
if test -z "$WITH_POOR_HELP_LOCALIZATIONS"; then
AC_MSG_RESULT([none])
else
AC_MSG_RESULT([$WITH_POOR_HELP_LOCALIZATIONS])
fi
AC_SUBST(WITH_POOR_HELP_LOCALIZATIONS)
AC_MSG_CHECKING([which dictionaries to include])
if test -z "$with_dict"; then
WITH_DICT=,ALL,
AC_MSG_RESULT([ALL])
else
WITH_DICT=","$with_dict","
AC_MSG_RESULT([$with_dict])
fi
AC_SUBST(WITH_DICT)
AC_MSG_CHECKING([for additional 'intro' bitmaps])
INTRO_BITMAPS=
if test -z "$with_intro_bitmaps" -o "$with_intro_bitmaps" = "no" ; then
INTRO_BITMAPS=
AC_MSG_RESULT([none])
else
for bitmap in `echo $with_intro_bitmaps | tr ',' ' '` ; do
case "$bitmap" in
*.bmp) ;;
*) bitmap= ; AC_MSG_WARN([Intro bitmaps should be .bmp files!]) ;;
esac
if test -n "$bitmap" ; then
INTRO_BITMAPS="$INTRO_BITMAPS $bitmap"
fi
done
AC_MSG_RESULT([$INTRO_BITMAPS])
fi
AC_SUBST(INTRO_BITMAPS)
AC_MSG_CHECKING([for additional 'about' bitmaps])
ABOUT_BITMAPS=
if test -z "$with_about_bitmaps" -o "$with_about_bitmaps" = "no" ; then
ABOUT_BITMAPS=
AC_MSG_RESULT([none])
else
for bitmap in `echo $with_about_bitmaps | tr ',' ' '` ; do
case "$bitmap" in
*.bmp) ;;
*) bitmap= ; AC_MSG_WARN([About bitmaps should be .bmp files!]) ;;
esac
if test -n "$bitmap" ; then
ABOUT_BITMAPS="$ABOUT_BITMAPS $bitmap"
fi
done
AC_MSG_RESULT([$ABOUT_BITMAPS])
fi
AC_SUBST(ABOUT_BITMAPS)
OOO_VENDOR=
AC_MSG_CHECKING([for vendor])
if test -z "$with_vendor" -o "$with_vendor" = "no" ; then
AC_MSG_RESULT([not set])
else
OOO_VENDOR="$with_vendor"
AC_MSG_RESULT([$OOO_VENDOR])
fi
AC_SUBST(OOO_VENDOR)
UNIXWRAPPERNAME=
AC_MSG_CHECKING([for UNIX wrapper name])
if test -z "$with_unix_wrapper" -o "$with_unix_wrapper" = "no" -o "$with_unix_wrapper" = "yes" ;
then
AC_MSG_RESULT([not set])
else
UNIXWRAPPERNAME="$with_unix_wrapper"
AC_MSG_RESULT([$UNIXWRAPPERNAME])
fi
AC_SUBST(UNIXWRAPPERNAME)
AC_MSG_CHECKING([whether to statically link to Gtk])
if test -n "$enable_static_gtk" && test "$enable_static_gtk" != "no"; then
ENABLE_STATIC_GTK="TRUE"
AC_MSG_RESULT([yes])
else
ENABLE_STATIC_GTK="FALSE"
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_STATIC_GTK)
AC_MSG_CHECKING([whether to use layout dialogs])
if test -n "$enable_layout" && test "$enable_layout" != "no"; then
ENABLE_LAYOUT="TRUE"
AC_MSG_RESULT([yes])
else
ENABLE_LAYOUT="FALSE"
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_LAYOUT)
# ===================================================================
# De- or increase default verbosity of build process
# ===================================================================
AC_MSG_CHECKING([build verbosity])
if test -n "$enable_verbose"; then
if test "$enable_verbose" = "yes"; then
VERBOSE="TRUE"
AC_MSG_RESULT([high])
fi
if test "$enable_verbose" = "no"; then
VERBOSE="FALSE"
AC_MSG_RESULT([low])
fi
else
AC_MSG_RESULT([not set])
fi
AC_SUBST(VERBOSE)
dnl ===================================================================
dnl Use zenity during build
dnl ===================================================================
AC_MSG_CHECKING([whether to use zenity during build])
if test "$enable_zenity" = "yes"; then
AC_MSG_RESULT([yes])
AC_PATH_PROGS( ZNTY, zenity )
if test -z "$ZNTY"; then
ENABLE_ZENITY=FALSE
else
ENABLE_ZENITY=TRUE
fi
else
ENABLE_ZENITY=FALSE
AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_ZENITY)
dnl ===================================================================
dnl Hook up LibOs nodep environmental variable to automake's equivalent
dnl --enable-dependency-tracking configure option
dnl ===================================================================
AC_MSG_CHECKING([whether to enable dependency tracking])
if test "$enable_dependency_tracking" = "no"; then
nodep=TRUE
AC_MSG_RESULT([no])
else
AC_MSG_RESULT([yes])
fi
AC_SUBST(nodep)
dnl ===================================================================
dnl Number of CPUs to use during the build
dnl ===================================================================
AC_MSG_CHECKING([for number of processors to use])
if test "z`uname -s`" = "zDarwin" -o "z`uname -s`" = "zOpenBSD"; then
BUILD_NCPUS=`sysctl -n hw.ncpu`
else
BUILD_NCPUS=`grep $'^processor\t*:' /proc/cpuinfo | wc -l`
fi
if test "z$with_num_cpus" != "z"; then
BUILD_NCPUS=$with_num_cpus
fi
if echo "$BUILD_NCPUS" | $EGREP -q '^[[[:space:]]]*0[[[:space:]]]*$' ; then
BUILD_NCPUS=1
fi
AC_MSG_RESULT([$BUILD_NCPUS])
AC_SUBST(BUILD_NCPUS)
dnl ===================================================================
dnl Number of parallel jobs to be executed by dmake
dnl ===================================================================
AC_MSG_CHECKING([for maximum of jobs per processor])
BUILD_MAX_JOBS="1"
if test "z$with_max_jobs" != "z"; then
if test "$with_max_jobs" -gt "10"; then
AC_MSG_WARN([dmake is limited to 10 jobs, using --with-max-jobs=10 (instead of
$with_max_jobs).])
with_max_jobs="10"
fi
BUILD_MAX_JOBS="$with_max_jobs"
else
if test -n "$enable_icecream" && test "$enable_icecream" != "no" ; then
BUILD_MAX_JOBS="10"
fi
fi
AC_MSG_RESULT([$BUILD_MAX_JOBS])
AC_SUBST(BUILD_MAX_JOBS)
dnl ===================================================================
dnl Setting up the environment.
dnl ===================================================================
echo "setting up the build environment variables..."
if test -z "$COMPATH"; then
AC_MSG_ERROR([No compiler found.])
fi
AC_SUBST(COMPATH)
AC_MSG_CHECKING([solver path])
if test -z "$with_local_solver"; then
LOCAL_SOLVER="DEFAULT"
AC_MSG_RESULT([default])
else
LOCAL_SOLVER=$with_local_solver
AC_MSG_RESULT([$with_local_solver])
fi
AC_SUBST(LOCAL_SOLVER)
AC_SUBST(BUILD_TYPE)
# make sure config.guess is +x; we execute config.guess, so it has to be so;
chmod +x ./config.guess
dnl Setting up the post_download check script
dnl Using autoconf here, so that the migration from the previous state
dnl (checks for the additional Windows downloads were directly in
dnl configure.in) is as easy as possible
echo "setting up the post_download check script"
autoconf post_download.in > post_download
chmod +x post_download
# Generate a configuration timestamp we can use for deps
if test -f set_soenv; then
mv -f set_soenv set_soenv.last
else
echo > set_soenv.last
fi
AC_OUTPUT([set_soenv Makefile bin/repo-list])
# touch the config timestamp file set_soenv.stamp
if test ! -f set_soenv.stamp; then
echo > set_soenv.stamp
elif diff set_soenv set_soenv.last >/dev/null 2>&1; then
echo "Configuration unchanged - avoiding scp2 stamp update"
else
echo > set_soenv.stamp
fi
dnl Executing the set_soenv script to setup the environment variables.
chmod a+x set_soenv
if test -z "$enable_check_only"; then
'./set_soenv'
else
echo
echo Test Complete
echo No environment file will be generated
echo
num_warnings=`wc -l warn`
_num=`echo $num_warnings | $AWK '{ print $1 }'`
if test $_num -gt 0; then
echo The following warning\(s\) were generated by configure
echo ----------------------------------------------------
echo
cat warn
echo
else
echo There were no warnings
fi
echo
fi
Context
Privacy Policy |
Impressum (Legal Info) |
Copyright information: Unless otherwise specified, all text and images
on this website are licensed under the
Creative Commons Attribution-Share Alike 3.0 License.
This does not include the source code of LibreOffice, which is
licensed under the Mozilla Public License (
MPLv2).
"LibreOffice" and "The Document Foundation" are
registered trademarks of their corresponding registered owners or are
in actual use as trademarks in one or more countries. Their respective
logos and icons are also subject to international copyright laws. Use
thereof is explained in our
trademark policy.