[Libreoffice] Make debugrun ? Help understanding

Hi,

Having built from master on Ubuntu 11.10 today, and then done a make 
dev-install -o build, I found myself faced with the following instructions :

Multiprocessing build is finished
Maximal number of processes run: 1

Developer installation finished, you can now execute:

make debugrun # on Linux
dopen /home/alex/LODEV/core/install/LibreOffice.app # on OSX

So like the dimwit I probably am, I typed in make debugrun, and :

make[1]: quittant le répertoire « /home/alex/LODEV/core »
alex@acer-xubuntu:~/LODEV/core$ make debugrun
make -f Makefile /home/alex/LODEV/core/Env.Host.sh && \
	if test -f /home/alex/LODEV/core/config.mk ; then . 
/home/alex/LODEV/core/config.mk; fi && \
	if test -f /home/alex/LODEV/core/Env.Host.sh; then . 
/home/alex/LODEV/core/Env.Host.sh; fi && \
	if test -z "${SOLARENV}"; then echo "no configuration found and could 
not create one" && exit 1; fi && \
        make -f Makefile debugrun
make[1]: entrant dans le répertoire « /home/alex/LODEV/core »
/home/alex/LODEV/core/solenv/gbuild/extensions/post_BuildplTargets.mk:33: attention 
: écrasement des commandes pour la cible « subsequentcheck »
/home/alex/LODEV/core/solenv/gbuild/Module.mk:137: attention : anciennes 
commandes ignorées pour la cible « subsequentcheck »
/home/alex/LODEV/core/solenv/gbuild/extensions/post_BuildplTargets.mk:37: attention 
: écrasement des commandes pour la cible « unitcheck »
/home/alex/LODEV/core/solenv/gbuild/Module.mk:130: attention : anciennes 
commandes ignorées pour la cible « unitcheck »
wrapped build - skip reading gbuild definitions
make[1]: « /home/alex/LODEV/core/Env.Host.sh » est à jour.
make[1]: quittant le répertoire « /home/alex/LODEV/core »
make[1]: entrant dans le répertoire « /home/alex/LODEV/core »
/home/alex/LODEV/core/solenv/gbuild/extensions/post_BuildplTargets.mk:33: attention 
: écrasement des commandes pour la cible « subsequentcheck »
/home/alex/LODEV/core/solenv/gbuild/Module.mk:137: attention : anciennes 
commandes ignorées pour la cible « subsequentcheck »
/home/alex/LODEV/core/solenv/gbuild/extensions/post_BuildplTargets.mk:37: attention 
: écrasement des commandes pour la cible « unitcheck »
/home/alex/LODEV/core/solenv/gbuild/Module.mk:130: attention : anciennes 
commandes ignorées pour la cible « unitcheck »
wrapped build - skip reading gbuild definitions
OFFICESCRIPT=`mktemp` && printf ". 
/home/alex/LODEV/core/solver/unxlngi6.pro/installation/opt/program/ooenv\\n" 
> ${OFFICESCRIPT} && printf "gdb 
/home/alex/LODEV/core/solver/unxlngi6.pro/installation/opt/program/soffice.bin" 
>> ${OFFICESCRIPT} && printf " -ex \"set args --norestore --nologo 
'--accept=pipe,name=alex;urp;' 
-env:UserInstallation=file:///home/alex/LODEV/core/solver/unxlngi6.pro/installation/\"" 
>> ${OFFICESCRIPT} && printf " -ex \"r\"\\n" >> ${OFFICESCRIPT} && 
/bin/sh ${OFFICESCRIPT} && rm ${OFFICESCRIPT}
GNU gdb (Ubuntu/Linaro 7.3-0ubuntu2) 7.3-2011.08
Copyright (C) 2011 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later 
<http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
and "show warranty" for details.
This GDB was configured as "i686-linux-gnu".
For bug reporting instructions, please see:
<http://bugs.launchpad.net/gdb-linaro/>...
Reading symbols from 
/home/alex/LODEV/core/solver/unxlngi6.pro/installation/opt/program/soffice.bin...(no 
debugging symbols found)...done.
Starting program: 
/home/alex/LODEV/core/solver/unxlngi6.pro/installation/opt/program/soffice.bin 
--norestore --nologo '--accept=pipe,name=alex;urp;' 
-env:UserInstallation=file:///home/alex/LODEV/core/solver/unxlngi6.pro/installation/
[Thread debugging using libthread_db enabled]
[New Thread 0x4371db70 (LWP 1147)]
[New Thread 0x4532eb70 (LWP 1148)]
[New Thread 0x4552fb70 (LWP 1149)]
[New Thread 0x4579fb70 (LWP 1150)]
[New Thread 0x459a0b70 (LWP 1151)]
[New Thread 0x45bd6b70 (LWP 1152)]
[Thread 0x4579fb70 (LWP 1150) exited]
[New Thread 0x4579fb70 (LWP 1153)]
[Thread 0x4579fb70 (LWP 1153) exited]
[New Thread 0x4579fb70 (LWP 1157)]
[New Thread 0x46a0ab70 (LWP 1160)]
[Thread 0x46a0ab70 (LWP 1160) exited]
[Thread 0x4579fb70 (LWP 1157) exited]
[New Thread 0x4579fb70 (LWP 1177)]
[New Thread 0x46a0ab70 (LWP 1182)]
[Thread 0x46a0ab70 (LWP 1182) exited]
[Thread 0x4579fb70 (LWP 1177) exited]
[New Thread 0x4579fb70 (LWP 1184)]
[New Thread 0x46a0ab70 (LWP 1188)]
[Thread 0x46a0ab70 (LWP 1188) exited]
[Thread 0x4579fb70 (LWP 1184) exited]
[New Thread 0x4579fb70 (LWP 1192)]
[New Thread 0x46a0ab70 (LWP 1194)]
[Thread 0x46a0ab70 (LWP 1194) exited]
[Thread 0x4579fb70 (LWP 1192) exited]
[New Thread 0x4579fb70 (LWP 1207)]
[New Thread 0x46a0ab70 (LWP 1210)]
[Thread 0x46a0ab70 (LWP 1210) exited]
[Thread 0x4579fb70 (LWP 1207) exited]
[New Thread 0x49564b70 (LWP 1213)]
[New Thread 0x49781b70 (LWP 1214)]
[New Thread 0x497d2b70 (LWP 1215)]
[New Thread 0x49823b70 (LWP 1216)]
[New Thread 0x498a4b70 (LWP 1217)]
[New Thread 0x498f5b70 (LWP 1218)]
[New Thread 0x49976b70 (LWP 1219)]
[New Thread 0x49befb70 (LWP 1220)]
[New Thread 0x4579fb70 (LWP 1222)]
[Thread 0x4579fb70 (LWP 1222) exited]
[Thread 0x4532eb70 (LWP 1148) exited]
[New Thread 0x4532eb70 (LWP 1223)]
[Thread 0x4532eb70 (LWP 1223) exited]
[New Thread 0x4532eb70 (LWP 1224)]
[Thread 0x4532eb70 (LWP 1224) exited]
[New Thread 0x4532eb70 (LWP 1225)]
[New Thread 0x4579fb70 (LWP 1226)]
[Thread 0x4532eb70 (LWP 1225) exited]
[Thread 0x4579fb70 (LWP 1226) exited]
[New Thread 0x4579fb70 (LWP 1227)]
[Thread 0x4579fb70 (LWP 1227) exited]
[New Thread 0x4579fb70 (LWP 1228)]
[Thread 0x4579fb70 (LWP 1228) exited]
[Thread 0x45bd6b70 (LWP 1152) exited]
[New Thread 0x45bd6b70 (LWP 1229)]
[Thread 0x45bd6b70 (LWP 1229) exited]
[Thread 0x459a0b70 (LWP 1151) exited]
[Thread 0x4371db70 (LWP 1147) exited]
[Thread 0x49befb70 (LWP 1220) exited]
[Thread 0x49976b70 (LWP 1219) exited]
[Thread 0x498f5b70 (LWP 1218) exited]
[Thread 0x498a4b70 (LWP 1217) exited]
[Thread 0x49823b70 (LWP 1216) exited]
[Thread 0x497d2b70 (LWP 1215) exited]
[Thread 0x49781b70 (LWP 1214) exited]
gdb


and there was gdb patiently waiting for something to happen, but nothing 
did.


Can anyone explain what I did wrong ? Can I just forget all that and go 
back to the usual ./ooenv and /soffice scripts ?


TIA,


Alex