[Libreoffice] Fw from tdf-discuss: Howto start building from tarball for Solaris x86

Hi all,

I'm wondering if anyone can help me with my libreoffice build from 
source problem. Meanwhile I did two trials, one on solaris and one on 
suse 11.4.

Both failed at the point where the real source is required to "make" 
libreoffice.
The automatic fetch from the web seems not to work since there are some 
web servers missing.
There is no hint how to spreadout the tarball of source code so that it 
is recognized by the configre and make.
So the bootstrap procedure foreseen in the bootstrap package seems to be 
broken.

Below you can find some details about my failed trials.

Any advice  would be much appreciated.

Regards,
Karl

> Hi Karl,
>
> maybe it is better to ask on the developers Mailing-List
> libreoffice@lists.freedesktop.org
> This here is more about common things around The Document Foundation,
> not LibreOffice itself.
>
> Volker
>
> 2011/8/31 Karl Behler <karl@behler-garching.de>:
> > Hi all again,
> >
> > now I tried the same at home under Suse 11.4.
> >
> > Downloaded libreoffice-bootstrap-3.3.4.1
> >
> > And followed the build steps:
> >
> > This is my autogen.sh:
> >
> > ./autogen.sh --with-num-cpus=2
> > --with-ant-home=/downloads/Ant/apache-ant-1.8.2
> > --with-junit=/downloads/Junit/junit-4.9.jar
> >
> > It runs through without complaining:
> > > .............
> > >
> > > configure: creating ./config.status
> > > config.status: creating set_soenv
> > > config.status: creating Makefile
> > > Setting up the environment for building LibreOffice
> > > Setting platform independent values... Setting Linux x86-64 specific
> > > values... done
> > > Setting the environment variables... done
> > > Setting the aliases... done
> > >
> > >
> > > ****************************************************************************
> > > *
> > > * LibreOffice 330 configuration.
> > > *
> > > *
> > > * Configuration part of LibreOffice 330 build is finished.
> > > *
> > > * NB! Be aware that you might not be able to build LibreOffice if you
> > > * ignore any warning message that were generated during this configuration
> > > * process.
> > > *
> > >
> > > ****************************************************************************
> > >
> > > To build, do:
> > >  $ make
> > >
> > > Developer installation (after you have built):
> > >  $ make dev-install
> > >
> > > Configure completed
> > But when I try to do the make:
> >
> > > papa@lnx54srv1:~/projects/libreoffice/3341/libreoffice-bootstrap-3.3.4.1>
> > > make
> > > found wget: wget
> > > found md5sum: md5sum
> > > 63ddc5116488985e820075e65fbe6aa4-openssl-0.9.8o.tar.gz
> > > Keine Daten empfangen.
> > > Keine Daten empfangen.
> > > Keine Daten empfangen.
> > > Keine Daten empfangen.
> > > Lesefehler (Die Verbindung wurde vom Kommunikationspartner zurückgesetzt)
> > > beim Vorspann (header).
> > > Lesefehler (Die Verbindung wurde vom Kommunikationspartner zurückgesetzt)
> > > beim Vorspann (header).
> > > Keine Daten empfangen.
> > > Keine Daten empfangen.
> > Obviously the reason is the same the file ooo.list is outdated and the
> > mentioned packages are not anymore found at the original places.
> >
> > Again - What to do? What to read?
> >
> > Regards
> > Karl
> >
> > Am 31.08.2011 17:25, schrieb Karl Behler:
> > > Hi all,
> > >
> > > I've downloaded the tarball from
> > > http://download.documentfoundation.org/libreoffice/src/3.3.4/ and
> > > untared everything. So I've got my directory filled with something like
> > >
> > > @LongLink, libreoffice-artwork-3.3.4.1/, libreoffice-base-3.3.4.1/,
> > > libreoffice-bootstrap-3.3.4.1/, libreoffice-calc-3.3.4.1/,
> > > libreoffice-components-3.3.4.1/, libreoffice-extensions-3.3.4.1/,
> > > libreoffice-extras-3.3.4.1/, libreoffice-filters-3.3.4.1/,
> > > libreoffice-help-3.3.4.1/, libreoffice-impress-3.3.4.1/,
> > > libreoffice-l10n-3.3.4.1/, libreoffice-libs-core-3.3.4.1/,
> > > libreoffice-libs-extern-3.3.4.1/, libreoffice-libs-extern-sys-3.3.4.1/,
> > > libreoffice-libs-gui-3.3.4.1/,
> > > libreoffice-postprocess-3.3.4.1/, libreoffice-sdk-3.3.4.1/,
> > > libreoffice-testing-3.3.4.1/, libreoffice-ure-3.3.4.1/,
> > > libreoffice-writer-3.3.4.1/
> > >
> > > Now I cd into libreoffice-bootstrap-3.3.4.1 and do the autogen.sh....
> > > I finally managed to get through this!!!!
> > >
> > > When I say "make" it tries to fetch a lot from various web locations
> > > which do not exist anymore. Why that? I thought I already downloaded the
> > > source with the full tarball????
> > >
> > > How can I avoid fetching files from external?
> > > How do I have to organize the source from the already downloaded tarball
> > > so that it is recognized by the configure and make procedures?
> > >
> > > My uname -a output is: SunOS sxaug21 5.10 Generic_144501-19 i86pc i386
> > >
> > > My autogen options where:
> > > ./autogen.sh --with-num-cpus=4 --disable-cups --disable-gconf
> > > --disable-gnome-vfs --prefix=/usr/gnu/64 --disable-gstreamer
> > >
> > > --with-ant-home=/afs/ipp-garching.mpg.de/home/k/kcb/ftp/Ant/apache-ant-1.8.2
> > > --without-junit --disable-fetch-external
> > >
> > > Any advice?
> > >
> > > Thanks,
> > >
> > > Karl
> > --
> > Unsubscribe instructions: E-mail to discuss+help@documentfoundation.org
> > Problems?
> > http://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/
> > Posting guidelines + more: http://wiki.documentfoundation.org/Netiquette
> > List archive: http://listarchives.documentfoundation.org/www/discuss/
> > All messages sent to this list will be publicly archived and cannot be
> > deleted
>
>
> -- Volker Merschmann Member of The Document Foundation http://www.documentfoundation.org


--
Dr. Karl Behler 
CODAC & IT services ASDEX Upgrade
phon +49 89 3299-1351 fax 3299-961351