(Re-posted with correct Subject)
Hi Kohei,
I've prepared a patch that removes the addin functions from calc/addin.
These changes are made available under LGPLv3+/MPL.
Wow. I never knew this (sc/addin) existed! And yes, it's also my
understanding that scaddins is the right home for all the add-in
functions.
I can't be 100% certain of this. But if you can build sc and scaddins
without the sc/addin directory, then I'm in favor of removing it. Looks
like no one has touched this since 2000, so it's probably obsolete.
So, please check if it's buildable, and go for removing it if the answer
is yes.
My impression is that these functions are mostly sample code, probably from an
early implementation.
Some comments in .src files seem to confirm this (please see below):
/* #i54546# The code belonging to this resource file is sample code for the
* legacy AddIn interface. The interface is still supported, but deprecated.
* The strings here were displayed in the function wizard.
This patch only removes the functions, but not the support mechanism for this
type of addins.
I wanted to be sure that removing the addin mechanism itself is the right thing
to do before going ahead (it's a bit intricate).
The comment above says that it's "supported, but deprecated", so I wanted to
make sure that it can be removed now.
Thanks & regards,
Alfonso
From 4fefcc71be9fd58d6acec82b56159d93df8b770c Mon Sep 17 00:00:00 2001
From: Alfonso Eusebio <alfonso_eusebio@yahoo.co.uk>
Date: Mon, 14 Feb 2011 08:16:04 +0000
Subject: [PATCH] Remove legacy Addin functions from calc
Removes legacy addin functions - seems to be sample code only.
These functions are available through the newer scaddin module.
---
sc/addin/datefunc/dfa.cl | 729 -----------------------------------------
sc/addin/datefunc/dfa.src | 178 ----------
sc/addin/datefunc/makefile.mk | 142 --------
sc/addin/inc/addin.h | 150 ---------
sc/addin/inc/dfa.hrc | 61 ----
sc/addin/inc/rot13.hrc | 34 --
sc/addin/makefile.mk | 45 ---
sc/addin/rot13/exports.map | 11 -
sc/addin/rot13/makefile.mk | 88 -----
sc/addin/rot13/rot13.cl | 158 ---------
sc/addin/rot13/rot13.src | 58 ----
sc/addin/util/cl2c.pl | 238 --------------
sc/addin/util/makefile.mk | 47 ---
sc/prj/build.lst | 7 +-
14 files changed, 1 insertions(+), 1945 deletions(-)
delete mode 100644 sc/addin/datefunc/dfa.cl
delete mode 100644 sc/addin/datefunc/dfa.src
delete mode 100644 sc/addin/datefunc/makefile.mk
delete mode 100644 sc/addin/inc/addin.h
delete mode 100644 sc/addin/inc/dfa.hrc
delete mode 100644 sc/addin/inc/rot13.hrc
delete mode 100644 sc/addin/makefile.mk
delete mode 100644 sc/addin/rot13/exports.map
delete mode 100644 sc/addin/rot13/makefile.mk
delete mode 100644 sc/addin/rot13/rot13.cl
delete mode 100644 sc/addin/rot13/rot13.src
delete mode 100644 sc/addin/util/cl2c.pl
delete mode 100644 sc/addin/util/makefile.mk
diff --git a/sc/addin/datefunc/dfa.cl b/sc/addin/datefunc/dfa.cl
deleted file mode 100644
index d45a1b5..0000000
--- a/sc/addin/datefunc/dfa.cl
+++ /dev/null
@@ -1,729 +0,0 @@
-/*************************************************************************
- *
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * Copyright 2000, 2010 Oracle and/or its affiliates.
- *
- * OpenOffice.org - a multi-platform office productivity suite
- *
- * This file is part of OpenOffice.org.
- *
- * OpenOffice.org is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License version 3
- * only, as published by the Free Software Foundation.
- *
- * OpenOffice.org is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License version 3 for more details
- * (a copy is included in the LICENSE file that accompanied this code).
- *
- * You should have received a copy of the GNU Lesser General Public License
- * version 3 along with OpenOffice.org. If not, see
- * <http://www.openoffice.org/license.html>
- * for a copy of the LGPLv3 License.
- *
- ************************************************************************/
-
-/* static char datefunc_Id[]="@(#) StarCalc Datefunc AddIn (c) 1998-2000 Sun Microsystems, Inc.";
*/
-
-#include <string.h>
-#include <stdlib.h>
-#include <math.h>
-
-#include <xlang.h>
-#include <addin.h>
-#include <dfa.hrc>
-
-
-/**
- * the current language the Addin is using
- */
-static USHORT _nLanguage=LANGUAGE_ENGLISH;
-
-/**
- * StarCalc calls this function to set a new current Language for the Addin
- *
- * @param *nLanguage
- *
- */
-void CALLTYPE SetLanguage( USHORT* nLanguage )
-{
- _nLanguage = GetNeutralLanguage( *nLanguage );
-}
-
-
-/**
- * Null Date, initialized in GetFunctionCount
- *
- * StarCalc uses a BaseDate 12/30/1899
- * If not specified otherwise in the Settings for the Spreedsheet Document.
- *
- * There's no way to get the Spreadsheet settings from whithin a simple addin,
- * so this Addin can only be used by documents using the default BaseDate setting.
- *
- * The functions in this Addin use a BaseDate 01/01/0001
- * The nNullDate Variable is the StarCalc BaseDate converted to
- * this internal date representation.
- *
- * @see #GetFunctionCount
- *
- */
-
-static ULONG nNullDate=0;
-
-#define NULLDATE_Year 1899
-#define NULLDATE_Month 12
-#define NULLDATE_Day 30
-
-
-/**
- * Array holding values for month length, used in DaysInMonth() function
- *
- * @see #DaysInMonth
- *
- */
-static USHORT aDaysInMonth[12] = { 31, 28, 31, 30, 31, 30,
- 31, 31, 30, 31, 30, 31 };
-
-/**
- * Check if a year is a leap year in the Gregorian calendar
- *
- * @param nYear the year which should be checked
- * @return true if the year is a leap year, false otherwise.
- *
- * @see #DaysInMonth, #IsLeapYear,
- * @see #ScDate_DaysInMonth, #ScDate_IsLeapYear, #ScDate_WeeksInYear
- *
- */
-static BOOL IsLeapYear( USHORT nYear )
-{
- return (BOOL)((((nYear % 4) == 0) && ((nYear % 100) != 0)) || ((nYear % 400) == 0));
-}
-
-
-/**
- * Get the number of days in a specified month
- *
- * @param nMonth the number of the Month
- * @param nYear the year
- * @return number of days
- *
- */
-static USHORT DaysInMonth( USHORT nMonth, USHORT nYear )
-{
- if ( nMonth != 2 )
- return aDaysInMonth[nMonth-1];
- else
- {
- if ( IsLeapYear(nYear) )
- return aDaysInMonth[nMonth-1] + 1;
- else
- return aDaysInMonth[nMonth-1];
- }
-}
-
-
-/**
- * Convert a date to a count of days starting from 01/01/0001
- *
- * The internal representation of a Date used in this Addin
- * is the number of days between 01/01/0001 and the date
- * this function converts a Day , Month, Year representation
- * to this internal Date value.
- *
- * @param nDay the day of the Month
- * @param nMonth the number of the Month
- * @param nYear the Year
- * @return count of days from 01/01/0001 to the date specified
- *
- */
-static long DateToDays( USHORT nDay, USHORT nMonth, USHORT nYear )
-{
- long nDays;
- USHORT i;
-
- nDays = ((ULONG)nYear-1) * 365;
- nDays += ((nYear-1) / 4) - ((nYear-1) / 100) + ((nYear-1) / 400);
-
- for( i = 1; i < nMonth; i++ )
- nDays += DaysInMonth(i,nYear);
- nDays += nDay;
-
- return nDays;
-}
-
-
-/**
- * Convert a count of days starting from 01/01/0001 to a date
- *
- * The internal representation of a Date used in this Addin
- * is the number of days between 01/01/0001 and the date
- * this function converts this internal Date value
- * to a Day , Month, Year representation of a Date.
- *
- * @param nDay count of days from 01/01/0001
- * @param *pDay pointer to a variable for the day of the month
- * @param *pMonth pointer to a variable for the month
- * @param *pYear pointer to a variable for the year
- *
- */
-static void DaysToDate( long nDays,
- USHORT *pDay, USHORT *pMonth, USHORT *pYear )
-{
- long nTempDays;
- long i = 0;
- BOOL bCalc;
-
- do
- {
- nTempDays = (long)nDays;
- *pYear = (USHORT)((nTempDays / 365) - i);
- nTempDays -= ((ULONG) *pYear -1) * 365;
- nTempDays -= (( *pYear -1) / 4) - (( *pYear -1) / 100) + ((*pYear -1) / 400);
- bCalc = FALSE;
- if ( nTempDays < 1 )
- {
- i++;
- bCalc = TRUE;
- }
- else
- {
- if ( nTempDays > 365 )
- {
- if ( (nTempDays != 366) || !IsLeapYear( *pYear ) )
- {
- i--;
- bCalc = TRUE;
- }
- }
- }
- }
- while ( bCalc );
-
- *pMonth = 1;
- while ( (ULONG)nTempDays > DaysInMonth( *pMonth, *pYear ) )
- {
- nTempDays -= DaysInMonth( *pMonth, *pYear );
- (*pMonth)++;
- }
- *pDay = (USHORT)nTempDays;
-}
-
-/**
- * Get week difference between 2 dates
- *
- * new Weeks(date1,date2,mode) function for StarCalc
- *
- * Two modes of operation are provided.
- * The first is just a simple division by 7 calculation.
- *
- * The second calculates the diffence by week of year.
- *
- * The International Standard IS-8601 has decreed that Monday
- * shall be the first day of the week.
- *
- * A week that lies partly in one year and partly in annother
- * is assigned a number in the the year in which most of its days lie.
- *
- * That means that week 1 of any year is the week that contains the 4. January
- *
- * The internal representation of a Date used in the Addin is the number of days based on
01/01/0001
- *
- * A WeekDay can be then calculated by substracting 1 and calculating the rest of
- * a division by 7, which gives a 0 - 6 value for Monday - Sunday
- *
- * Using the 4. January rule explained above the formula
- *
- * nWeek1= ( nDays1 - nJan4 + ( (nJan4-1) % 7 ) ) / 7 + 1;
- *
- * calculates a number between 0-53 for each day which is in the same year as nJan4
- * where 0 means that this week belonged to the year before.
- *
- * If a day in the same or annother year is used in this formula this calculates
- * an calendar week offset from a given 4. January
- *
- * nWeek2 = ( nDays2 - nJan4 + ( (nJan4-1) % 7 ) ) / 7 + 1;
- *
- * The 4.January of first Date Argument can thus be used to calculate
- * the week difference by calendar weeks which is then nWeek = nWeek2 - nWeek1
- *
- * which can be optimized to
- *
- * nWeek = ( (nDays2-nJan4+((nJan4-1)%7))/7 ) - ( (nDays1-nJan4+((nJan4-1)%7))/7 )
- *
- * Note: All calculations are operating on the long integer data type
- * % is the modulo operator in C which calculates the rest of an Integer division
- *
- *
- * @param *r - return value for the StarCalc function
- * @param d1 - date value (in StarCalc representation based 12/30/1899), usually the older date
- * @param d2 - date value (in StarCalc representation based 12/30/1899), usually the younger date
- * @param dMode - mode of operation
- *
- * mode 0 is the interval between the dates in month, that is days / 7
- *
- * mode 1 is the difference by week of year
- *
- */
-void CALLTYPE ScDate_GetDiffWeeks(double *r, double *d1, double *d2, double *dMode)
-{
- long nDays1=0;
- long nDays2=0;
- int nMode=0;
-
- if ( d1 ) nDays1=(long)floor(*d1)+nNullDate;
- if ( d2 ) nDays2=(long)floor(*d2)+nNullDate;
-
-
- if ( dMode) nMode=(int)*dMode;
-
- if ( nMode == 1 ) {
-
- USHORT nDay,nMonth,nYear;
- long nJan4;
-
- DaysToDate(nDays1,&nDay,&nMonth,&nYear);
- nJan4=DateToDays(4,1,nYear);
-
- *r=(double) ( ( (nDays2-nJan4+((nJan4-1)%7))/7 ) - ( (nDays1-nJan4+((nJan4-1)%7))/7 ) );
-
- } else {
-
- *r= (double) ( (nDays2 - nDays1) / 7 ) ;
- }
-
-}
-
-/**
- * Get month difference between 2 dates
- * =Month(start, end, mode) Function for StarCalc
- *
- * two modes are provided
- *
- * @param *r - return value for the StarCalc function
- * @param d1 - date value, start date
- * @param d2 - date value, end date
- * @param dMode - mode of operation
- *
- * mode 0 is the interval between the dates in month
- *
- * mode 1 is the difference in calendar month
- *
- */
-void CALLTYPE ScDate_GetDiffMonths(double *r, double *d1, double *d2, double *dMode)
-{
- USHORT nDay1,nMonth1,nYear1;
- USHORT nDay2,nMonth2,nYear2;
- long nDays1=0;
- long nDays2=0;
- int nMode=0;
-
- if ( dMode) nMode=(int)*dMode;
-
- if ( d1 ) nDays1=(long)floor(*d1)+nNullDate;
- if ( d2 ) nDays2=(long)floor(*d2)+nNullDate;
-
- DaysToDate(nDays1,&nDay1,&nMonth1,&nYear1);
- DaysToDate(nDays2,&nDay2,&nMonth2,&nYear2);
-
- *r=(double) ( nMonth2 - nMonth1 + (nYear2 - nYear1) * 12 );
- if ( nMode == 1 || nDays1 == nDays2 ) return;
-
- if ( nDays1 < nDays2 ) {
- if ( nDay1 > nDay2 ) {
- *r -= 1;
- }
- } else {
- if ( nDay1 < nDay2 ) {
- *r += 1;
- }
- }
-
-}
-
-
-/**
- * Get Year difference between 2 dates
- *
- * two modes are provided
- *
- * @param *r - return value for the StarCalc function
- * @param d1 - date value, start date
- * @param d2 - date value, end date
- * @param dMode - mode of operation
- *
- * mode 0 is the interval between the dates in years
- *
- * mode 1 is the difference in calendar years
- *
- */
-void CALLTYPE ScDate_GetDiffYears(double *r, double *d1, double *d2, double *dMode)
-{
- USHORT nDay1,nMonth1,nYear1;
- USHORT nDay2,nMonth2,nYear2;
- long nDays1=0;
- long nDays2=0;
- int nMode=0;
-
- if ( dMode) nMode=(int)*dMode;
-
- if ( d1 ) nDays1=(long)floor(*d1)+nNullDate;
- if ( d2 ) nDays2=(long)floor(*d2)+nNullDate;
-
- DaysToDate(nDays1,&nDay1,&nMonth1,&nYear1);
- DaysToDate(nDays2,&nDay2,&nMonth2,&nYear2);
- if ( nMode != 1 ) {
- ScDate_GetDiffMonths(r,d1,d2,dMode);
- *r= (double) ( ((int) *r) / 12 );
- } else {
- *r=(double) ( nYear2 - nYear1 );
- }
-}
-
-/**
- * Check if a Date is in a leap year in the Gregorian calendar
- *
- * @param *r - return value for the StarCalc function
- * @param d - date value (in StarCalc representation based 12/30/1899)
- *
- */
-void CALLTYPE ScDate_IsLeapYear(double *r, double *d)
-{
- ULONG nDays;
- USHORT nDay, nMonth, nYear;
- double v=0.0;
-
- if ( d ) v=*d;
- nDays=(int) v + nNullDate;
-
- DaysToDate(nDays,&nDay,&nMonth,&nYear);
-
- *r=(double) ( IsLeapYear(nYear) );
-
-}
-
-/**
- * Get the Number of Days in the month for a date
- *
- * @param *r - return value for the StarCalc function
- * @param d - date value (in StarCalc representation based 12/30/1899)
- *
- */
-void CALLTYPE ScDate_DaysInMonth(double *r, double *d)
-{
- ULONG nDays;
- USHORT nDay, nMonth, nYear;
- double v=0.0;
-
- if ( d ) v=*d;
- nDays=(int) v + nNullDate;
-
- DaysToDate(nDays,&nDay,&nMonth,&nYear);
- *r=(double) ( DaysInMonth( nMonth, nYear) );
-
-}
-
-
-/**
- * Get number of weeks in the year for a date
- *
- * Most years have 52 weeks, but years that start on a Thursday
- * and leep years that start on a Wednesday have 53 weeks
- *
- * The International Standard IS-8601 has decreed that Monday
- * shall be the first day of the week.
- *
- * A WeekDay can be calculated by substracting 1 and calculating the rest of
- * a division by 7 from the internal date represention
- * which gives a 0 - 6 value for Monday - Sunday
- *
- * @param *r - return value for the StarCalc function
- * @param d - date value (in StarCalc represantaion based 30.12.1899)
- *
- * @see #IsLeapYear #WeekNumber
- *
- */
-void CALLTYPE ScDate_WeeksInYear(double *r, double *d)
-{
- ULONG nDays;
- USHORT nDay, nMonth, nYear;
- double v=0.0;
- long nJan1WeekDay;
-
- if ( d ) v=*d;
- nDays=(int) v + nNullDate;
-
- DaysToDate(nDays,&nDay,&nMonth,&nYear);
-
- nJan1WeekDay= ( DateToDays(1,1,nYear) - 1) % 7;
-
- if ( nJan1WeekDay == 3 ) { /* Thursday */
- *r=(double) 53;
- return;
- } else if ( nJan1WeekDay == 2 ) { /* Wednesday */
- *r= (double) ( IsLeapYear(nYear) ? 53 : 52 );
- } else {
- *r= (double) 52;
- }
-}
-
-
-/**
- * Get number of days in the year of a date specified
- *
- * @param *r - return value for the StarCalc function
- * @param d - date value (in StarCalc represantaion based 30.12.1899)
- *
- */
-void CALLTYPE ScDate_DaysInYear(double *r, double *d)
-{
- ULONG nDays;
- USHORT nDay, nMonth, nYear;
- double v=0.0;
-
- if ( d ) v=*d;
- nDays=(int) v + nNullDate;
-
- DaysToDate(nDays,&nDay,&nMonth,&nYear);
- *r=(double) ( IsLeapYear(nYear) ? 366 : 365 );
-
-}
-
-
-/**
- * Tell StarCalc how many new functions this Addin provides.
- *
- * It's called before any of these new functions is actually
- * executed and is also used to initialize the NullDate here.
- *
- * StarCalc uses a Date Base 12/30/1899
- * If not specified otherwise in the Options for the Spreedsheet Document
- *
- *
- * @param *nCount - returns the number of functions which are exported to StarCalc
- *
- */
-void CALLTYPE GetFunctionCount( USHORT *nCount )
-{
-
- /* initialize nNullDate Value 0 is 12/30/1899 */
- nNullDate=DateToDays(NULLDATE_Day, NULLDATE_Month, NULLDATE_Year);
-
- *nCount = 7;
-}
-
-/**
- * Provides neccessary data for each new function to StarCalc
- *
- * @param *nNo Input: Function number between 0 and nCount - 1
- * @param *pFuncName Output: Functionname which should be called in the AddIn-DLL
- * @param *nParamCount Output: Number of Parameter. Must be greater than 0, because there's always
a return-Value. Maximum is 16.
- * @param *peType Output: Pointer to arrray with exactly 16 variables of typ Paramtype.
nParamCount Entries are set to the type of the corresponding Parameters.
- * @param *pInternalName Output: Functionname as seen by the Spreadsheet user
- *
- * @see #GetFunctionCount, #GetParameterDescription
- *
- */
-void CALLTYPE GetFunctionData( USHORT * nNo,
- char * pFuncName,
- USHORT * nParamCount,
- ParamType * peType,
- char * pInternalName )
-{
-
-
- switch( *nNo ) {
- case 0:
- SO_StringCopy( pInternalName, getText(DFA_WEEK_NAME) );
- SO_StringCopy( pFuncName, "ScDate_GetDiffWeeks" );
- peType[0] = PTR_DOUBLE;
- peType[1] = PTR_DOUBLE;
- peType[2] = PTR_DOUBLE;
- peType[3] = PTR_DOUBLE;
- *nParamCount=4;
- break;
-
- case 1:
- SO_StringCopy( pInternalName, getText(DFA_MONTHS_NAME) );
- SO_StringCopy( pFuncName, "ScDate_GetDiffMonths" );
- peType[0] = PTR_DOUBLE;
- peType[1] = PTR_DOUBLE;
- peType[2] = PTR_DOUBLE;
- peType[3] = PTR_DOUBLE;
- *nParamCount=4;
- break;
-
- case 2:
- SO_StringCopy( pInternalName, getText(DFA_YEARS_NAME) );
- SO_StringCopy( pFuncName, "ScDate_GetDiffYears" );
- peType[0] = PTR_DOUBLE;
- peType[1] = PTR_DOUBLE;
- peType[2] = PTR_DOUBLE;
- peType[3] = PTR_DOUBLE;
- *nParamCount=4;
- break;
-
- case 3:
- SO_StringCopy( pInternalName, getText(DFA_ISLEAPYEAR_NAME) );
- SO_StringCopy( pFuncName, "ScDate_IsLeapYear" );
- peType[0] = PTR_DOUBLE;
- peType[1] = PTR_DOUBLE;
- *nParamCount=2;
- break;
-
- case 4:
- SO_StringCopy( pInternalName, getText(DFA_DAYSINMONTH_NAME) );
- SO_StringCopy( pFuncName, "ScDate_DaysInMonth" );
- peType[0] = PTR_DOUBLE;
- peType[1] = PTR_DOUBLE;
- *nParamCount=2;
- break;
-
- case 5:
- SO_StringCopy( pInternalName, getText(DFA_DAYSINYEAR_NAME) );
- SO_StringCopy( pFuncName, "ScDate_DaysInYear" );
- peType[0] = PTR_DOUBLE;
- peType[1] = PTR_DOUBLE;
- *nParamCount=2;
- break;
-
- case 6:
- SO_StringCopy( pInternalName, getText(DFA_WEEKSINYEAR_NAME) );
- SO_StringCopy( pFuncName, "ScDate_WeeksInYear" );
- peType[0] = PTR_DOUBLE;
- peType[1] = PTR_DOUBLE;
- *nParamCount=2;
- break;
-
- default:
- *nParamCount = 0;
- *pFuncName = 0;
- *pInternalName = 0;
- break;
- }
-}
-
-/**
- * Provides descriptions for each new function to StarCalc
- * which are shown is the autopilot
- *
- * @param *nNo Input Parameter, Function number between 0 and nCount - 1
- * @param *nParam Parameter Number
- * @param *pName Output: Name of the parameter
- * @param *pDesc Output: Description of the parameter
- *
- * @see #GetFunctionCount, #GetParameterDescription
- */
-void CALLTYPE GetParameterDescription( USHORT* nNo, USHORT* nParam,
-char* pName, char* pDesc )
-{
- *pName = 0;
- *pDesc = 0;
-
- switch ( *nNo ) {
- case 0: /* Weeks */
- switch ( *nParam ) {
- case 0:
- SO_StringCopy(pDesc,getText(DFA_WEEK_DESC));
- break;
- case 1:
- SO_StringCopy(pName,getText(DFA_PAR_DATE1_NAME));
- SO_StringCopy(pDesc,getText(DFA_WEEK_PAR1_DESC));
- break;
- case 2:
- SO_StringCopy(pName,getText(DFA_PAR_DATE2_NAME));
- SO_StringCopy(pDesc,getText(DFA_WEEK_PAR2_DESC));
- break;
- case 3:
- SO_StringCopy(pName,getText(DFA_PAR_MODE_NAME));
- SO_StringCopy(pDesc,getText(DFA_WEEK_PAR3_DESC));
- break;
- }
- break;
- case 1: /* Months */
- switch ( *nParam ) {
- case 0:
- SO_StringCopy(pDesc,getText(DFA_MONTHS_DESC));
- break;
- case 1:
- SO_StringCopy(pName,getText(DFA_PAR_DATE1_NAME));
- SO_StringCopy(pDesc,getText(DFA_MONTHS_PAR1_DESC));
- break;
- case 2:
- SO_StringCopy(pName,getText(DFA_PAR_DATE2_NAME));
- SO_StringCopy(pDesc,getText(DFA_MONTHS_PAR2_DESC));
- break;
- case 3:
- SO_StringCopy(pName,getText(DFA_PAR_MODE_NAME));
- SO_StringCopy(pDesc,getText(DFA_MONTHS_PAR3_DESC));
- break;
- }
- break;
- case 2: /* Years */
- switch ( *nParam ) {
- case 0:
- SO_StringCopy(pDesc,getText(DFA_YEARS_DESC));
- break;
- case 1:
- SO_StringCopy(pName,getText(DFA_PAR_DATE1_NAME));
- SO_StringCopy(pDesc,getText(DFA_YEARS_PAR1_DESC));
- break;
- case 2:
- SO_StringCopy(pName,getText(DFA_PAR_DATE2_NAME));
- SO_StringCopy(pDesc,getText(DFA_YEARS_PAR2_DESC));
- break;
- case 3:
- SO_StringCopy(pName,getText(DFA_PAR_MODE_NAME));
- SO_StringCopy(pDesc,getText(DFA_YEARS_PAR3_DESC));
- break;
- }
- break;
- case 3: /* IsLeapYear */
- switch ( *nParam ) {
- case 0:
- SO_StringCopy(pDesc,getText(DFA_ISLEAPYEAR_DESC));
- break;
- case 1:
- SO_StringCopy(pName,getText(DFA_PAR_DATE_NAME));
- SO_StringCopy(pDesc,getText(DFA_PAR_DATE_DESC)); /* StarCalc Value */
- break;
- }
- break;
- case 4: /* DaysInMonth */
- switch ( *nParam ) {
- case 0:
- SO_StringCopy(pDesc,getText(DFA_DAYSINMONTH_DESC));
- break;
- case 1:
- SO_StringCopy(pName,getText(DFA_PAR_DATE_NAME));
- SO_StringCopy(pDesc,getText(DFA_PAR_DATE_DESC)); /* StarCalc Value */
- break;
- }
- break;
- case 5: /* DaysInYear */
- switch ( *nParam ) {
- case 0:
- SO_StringCopy(pDesc,getText(DFA_DAYSINYEAR_DESC));
- break;
- case 1:
- SO_StringCopy(pName,getText(DFA_PAR_DATE_NAME));
- SO_StringCopy(pDesc,getText(DFA_PAR_DATE_DESC)); /* StarCalc Value */
- break;
- }
- break;
-
- case 6: /* WeeksInYear */
- switch ( *nParam ) {
- case 0:
- SO_StringCopy(pDesc,getText(DFA_WEEKSINYEAR_DESC));
- break;
- case 1:
- SO_StringCopy(pName,getText(DFA_PAR_DATE_NAME));
- SO_StringCopy(pDesc,getText(DFA_PAR_DATE_DESC)); /* StarCalc Value */
- break;
- }
- break;
- }
-
-}
diff --git a/sc/addin/datefunc/dfa.src b/sc/addin/datefunc/dfa.src
deleted file mode 100644
index 6a38f30..0000000
--- a/sc/addin/datefunc/dfa.src
+++ /dev/null
@@ -1,178 +0,0 @@
-/*************************************************************************
- *
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * Copyright 2000, 2010 Oracle and/or its affiliates.
- *
- * OpenOffice.org - a multi-platform office productivity suite
- *
- * This file is part of OpenOffice.org.
- *
- * OpenOffice.org is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License version 3
- * only, as published by the Free Software Foundation.
- *
- * OpenOffice.org is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License version 3 for more details
- * (a copy is included in the LICENSE file that accompanied this code).
- *
- * You should have received a copy of the GNU Lesser General Public License
- * version 3 along with OpenOffice.org. If not, see
- * <http://www.openoffice.org/license.html>
- * for a copy of the LGPLv3 License.
- *
- ************************************************************************/
-#include "sc.hrc" // Definition RID_XXX in StarCalc
-#include "dfa.hrc"
-
-/* #i54546# The code belonging to this resource file is sample code for the
- * legacy AddIn interface. The interface is still supported, but deprecated.
- * The strings here were displayed in the function wizard. To prevent
- * duplicated and useless translation effort (functions and strings are also
- * part of the new scaddin module), the strings here are now layed out as fixed
- * untranslatable strings. The entire mechanism with the ../util/cl2c.pl perl
- * script merging the raw .cl and the .src during build time didn't work
- * anymore anyway, since we switched from MS-LCIDs / telephone area codes to
- * ISO codes for resources, and introduced localize.sdf files. Returned was
- * always an empty string. Now at least the fixed English string is returned.
- * */
-
-Resource RID_SC_ADDIN_DFA
-{
- String DFA_PAR_DATE1_NAME // Name of Date1 Parameter
- {
- Text = "Date 1";
- };
- String DFA_PAR_DATE2_NAME // Name of Date2 Parameter
- {
- Text = "Date 2";
- };
- String DFA_PAR_MODE_NAME // Name of Mode Parameter
- {
- Text = "Mode";
- };
-
- String DFA_PAR_DATE_NAME // Name of Date Parameter
- {
- Text = "Date";
- };
-
- String DFA_PAR_DATE_DESC // Description of Date Parameter
- {
- Text = "Internal number of the date";
- };
-
-/*-=======================================================================*/
- String DFA_WEEK_NAME // Name
- {
- Text = "Weeks";
- };
- String DFA_WEEK_DESC // Description
- {
- Text = "Returns the difference in weeks between two dates";
- };
- String DFA_WEEK_PAR1_DESC // Description of Parameter 1
- {
- Text = "The end date for calculating the difference in weeks";
- };
- String DFA_WEEK_PAR2_DESC // Description of Parameter 2
- {
- Text = "The start date for calculating the difference weeks";
- };
- String DFA_WEEK_PAR3_DESC // Description of Parameter 3
- {
- Text = "Type of difference calculation: mode=0 means the interval, mode=1 means calendar
weeks";
- };
-
-/*-=======================================================================*/
-
- String DFA_MONTHS_NAME // Name
- {
- Text = "Months";
- };
- String DFA_MONTHS_DESC // Description
- {
- Text = "Determines the number of months between two dates";
- };
- String DFA_MONTHS_PAR1_DESC // Description of Parameter 1
- {
- Text = "The end date for calculating the difference in months";
- };
- String DFA_MONTHS_PAR2_DESC // Description of Parameter 2
- {
- Text = "The start date for calculating the difference in months";
- };
- String DFA_MONTHS_PAR3_DESC // Description of Parameter 2
- {
- Text = "Type of difference calculation: Mode = 0 means interval, mode = 1 means in
calendar months";
- };
-
-/*-=======================================================================*/
-
- String DFA_YEARS_NAME // Name
- {
- Text = "Years";
- };
- String DFA_YEARS_DESC // Description
- {
- Text = "Returns the difference in years between two dates";
- };
- String DFA_YEARS_PAR1_DESC // Description of Parameter 1
- {
- Text = "The end date for calculating the difference in years";
- };
- String DFA_YEARS_PAR2_DESC // Description of Parameter 2
- {
- Text = "The start date for calculating the difference in years";
- };
- String DFA_YEARS_PAR3_DESC // Description of Parameter 2
- {
- Text = "Type of difference calculation: Mode=0 means interval, mode=1 means in calendar
years.";
- };
-
-/*-=======================================================================*/
-
- String DFA_ISLEAPYEAR_NAME // Name
- {
- Text = "IsLeapYear";
- };
- String DFA_ISLEAPYEAR_DESC // Description
- {
- Text = "Returns 1 (TRUE) if a leap year is used, otherwise 0 (FALSE) is returned";
- };
-
-/*-=======================================================================*/
-
- String DFA_DAYSINMONTH_NAME // Name
- {
- Text = "DaysInMonth";
- };
- String DFA_DAYSINMONTH_DESC // Description
- {
- Text = "Returns the number of days in the month in relation to the date entered";
- };
-
-/*-=======================================================================*/
-
- String DFA_DAYSINYEAR_NAME // Name
- {
- Text = "DaysInYear";
- };
- String DFA_DAYSINYEAR_DESC // Description
- {
- Text = "Returns the number of days in a year in relation to the date entered";
- };
-
-/*-=======================================================================*/
-
- String DFA_WEEKSINYEAR_NAME // Name
- {
- Text = "WeeksInYear";
- };
- String DFA_WEEKSINYEAR_DESC // Description
- {
- Text = "Returns the number of weeks in the year in relation to a date";
- };
-};
diff --git a/sc/addin/datefunc/makefile.mk b/sc/addin/datefunc/makefile.mk
deleted file mode 100644
index 2b3f446..0000000
--- a/sc/addin/datefunc/makefile.mk
+++ /dev/null
@@ -1,142 +0,0 @@
-#*************************************************************************
-#
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# Copyright 2000, 2010 Oracle and/or its affiliates.
-#
-# OpenOffice.org - a multi-platform office productivity suite
-#
-# This file is part of OpenOffice.org.
-#
-# OpenOffice.org is free software: you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License version 3
-# only, as published by the Free Software Foundation.
-#
-# OpenOffice.org is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU Lesser General Public License version 3 for more details
-# (a copy is included in the LICENSE file that accompanied this code).
-#
-# You should have received a copy of the GNU Lesser General Public License
-# version 3 along with OpenOffice.org. If not, see
-# <http://www.openoffice.org/license.html>
-# for a copy of the LGPLv3 License.
-#
-#*************************************************************************
-
-PRJ=..$/..
-
-PRJNAME=sc
-TARGET=dfa
-LIBTARGET=NO
-
-# --- Settings -----------------------------------------------------
-
-.INCLUDE: settings.mk
-
-CL2C=+$(PERL) $(MISC)$/cl2c.pl
-CL2CRID=RID_SC_ADDIN_DFA
-CL2CSRC=$(TARGET).src
-
-# --- Files --------------------------------------------------------
-
-CFILES= $(MISC)$/x$(TARGET).c
-
-SLOFILES= \
- $(SLO)$/x$(TARGET).obj
-
-# ==========================================================================
-
-SHL1TARGET= $(TARGET)$(DLLPOSTFIX)
-SHL1IMPLIB= i$(TARGET)
-SHL1OBJS= $(SLO)$/x$(TARGET).obj
-SHL1DEF= $(MISC)$/$(SHL1TARGET).def
-
-.IF "$(GUI)" == "WNT"
-SHL1STDLIBS= $(GDI32LIB) $(ADVAPI32LIB) $(COMDLG32LIB) \
- $(UUIDLIB) $(OLE32LIB) $(SHELL32LIB) $(WINSPOOLLIB)
-.IF "$(GVER)" == "W40"
-SHL1STDLIBS= $(SHL1STDLIBS) $(COMCTL32LIB)
-.ENDIF
-.ENDIF
-
-# --- Targets -------------------------------------------------------
-
-ALLTAR: $(MISC)$/$(TARGET).lst
-
-
-.INCLUDE: target.mk
-
-$(MISC)$/x$(TARGET).c: $(TARGET).cl $(CL2CSRC)
- $(CL2C) $(TARGET).cl $(MISC)$/x$(TARGET).c $(CL2CSRC) $(CL2CRID)
-
-# copy file to include in package
-$(INCCOM)$/xlang.h : $(SOLARINCDIR)$/i18npool$/lang.h
- @$(COPY) $(SOLARINCDIR)$/i18npool$/lang.h $@
-
-
-$(SLOFILES) : $(INCCOM)$/xlang.h $(CFILES)
-
-$(MISC)$/$(TARGET).lst : \
- $(MISC)$/x$(TARGET).c \
- $(INCCOM)$/xlang.h \
- ..$/inc$/$(TARGET).hrc \
- ..$/inc$/addin.h
- echo $< > $@
-
-# --- Def-File ---
-
-# ------------------------------------------------------------------
-# Windows DEF File
-# ------------------------------------------------------------------
-
-.IF "$(GUI)"=="WNT"
-
-$(MISC)$/$(SHL1TARGET).def: makefile.mk
- @echo ------------------------------
- @echo Making: $@
- @echo LIBRARY $(SHL1TARGET)>$@
-.IF "$(COM)"!="GCC"
- @echo DESCRIPTION 'DateF StarCalc Addin DLL'>>$@
- @echo DATA READ WRITE NONSHARED>>$@
-.ENDIF
- @echo EXPORTS>>$@
- @echo GetFunctionCount>>$@
- @echo GetFunctionData>>$@
- @echo GetParameterDescription>>$@
- @echo SetLanguage >>$@
- @echo ScDate_GetDiffWeeks>>$@
- @echo ScDate_GetDiffMonths>>$@
- @echo ScDate_GetDiffYears>>$@
- @echo ScDate_IsLeapYear>>$@
- @echo ScDate_DaysInMonth>>$@
- @echo ScDate_DaysInYear>>$@
- @echo ScDate_WeeksInYear>>$@
-
-.ENDIF
-
-.IF "$(GUI)"=="OS2"
-
-$(MISC)$/$(SHL1TARGET).def: makefile.mk
- @echo ------------------------------
- @echo Making: $@
- @echo LIBRARY $(SHL1TARGET) INITINSTANCE TERMINSTANCE >$@
- @echo DESCRIPTION 'DateF StarCalc Addin DLL'>>$@
- @echo DATA MULTIPLE>>$@
- @echo EXPORTS>>$@
- @echo _GetFunctionCount>>$@
- @echo _GetFunctionData>>$@
- @echo _GetParameterDescription>>$@
- @echo _SetLanguage >>$@
- @echo _ScDate_GetDiffWeeks>>$@
- @echo _ScDate_GetDiffMonths>>$@
- @echo _ScDate_GetDiffYears>>$@
- @echo _ScDate_IsLeapYear>>$@
- @echo _ScDate_DaysInMonth>>$@
- @echo _ScDate_DaysInYear>>$@
- @echo _ScDate_WeeksInYear>>$@
-
-.ENDIF
-
-
diff --git a/sc/addin/inc/addin.h b/sc/addin/inc/addin.h
deleted file mode 100644
index 400af29..0000000
--- a/sc/addin/inc/addin.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
-/*************************************************************************
- *
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * Copyright 2000, 2010 Oracle and/or its affiliates.
- *
- * OpenOffice.org - a multi-platform office productivity suite
- *
- * This file is part of OpenOffice.org.
- *
- * OpenOffice.org is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License version 3
- * only, as published by the Free Software Foundation.
- *
- * OpenOffice.org is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License version 3 for more details
- * (a copy is included in the LICENSE file that accompanied this code).
- *
- * You should have received a copy of the GNU Lesser General Public License
- * version 3 along with OpenOffice.org. If not, see
- * <http://www.openoffice.org/license.html>
- * for a copy of the LGPLv3 License.
- *
- ************************************************************************/
-
-#ifndef _ADDIN_H
-#define _ADDIN_H
-
-#ifndef _SOLAR_H
-
-#ifndef TRUE
-#define TRUE 1
-#endif
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-#undef NULL
-#define NULL 0
-
-typedef unsigned char BOOL;
-typedef unsigned char BYTE;
-typedef unsigned short USHORT;
-typedef unsigned long ULONG;
-
-#endif
-
-#ifndef SUPD
-/* enable all new interface features */
-#define SUPD 9999
-#endif
-
-/* all character string returns are limited to 255+1 chars */
-#define SO_CHARSTRING_MAX 256
-#define SO_StringCopy( dst, src ) \
- (strncpy( dst, src, SO_CHARSTRING_MAX ), dst[SO_CHARSTRING_MAX-1] = '\0')
-
-typedef enum
-{
- PTR_DOUBLE,
- PTR_STRING,
- PTR_DOUBLE_ARR,
- PTR_STRING_ARR,
- PTR_CELL_ARR,
- NONE
-} ParamType;
-
-#ifndef WIN
-#ifdef WNT
-#define CALLTYPE __cdecl
-#else
-#define CALLTYPE
-#endif
-#else
-#define PASCAL _pascal
-#define FAR _far
-#define CALLTYPE FAR PASCAL
-#endif
-
-
-#ifdef __cplusplus
-
-extern "C" {
-
-typedef void (CALLTYPE* AdvData)( double& nHandle, void* pData );
-
-extern void CALLTYPE GetFunctionCount( USHORT& nCount );
-
-extern void CALLTYPE GetFunctionData( USHORT& nNo,
- char* pFuncName,
- USHORT& nParamCount,
- ParamType* peType,
- char* pInternalName );
-
-extern void CALLTYPE IsAsync( USHORT& nNo, ParamType* peType );
-
-extern void CALLTYPE Advice( USHORT& nNo, AdvData& pfCallback );
-
-extern void CALLTYPE Unadvice( double& nHandle );
-
-
-/* new in StarOffice 5.0 */
-
-extern void CALLTYPE GetParameterDescription( USHORT& nNo, USHORT& nParam,
-char* pName, char* pDesc );
-
-/* new in StarOffice 5.1 */
-
-extern void CALLTYPE SetLanguage( USHORT& nLanguage );
-
-
-};
-
-#else
-
-typedef void (CALLTYPE* AdvData)( double* nHandle, void* pData );
-
-extern void CALLTYPE GetFunctionCount( USHORT * nCount );
-
-extern void CALLTYPE GetFunctionData( USHORT * nNo,
- char * pFuncName,
- USHORT * nParamCount,
- ParamType * peType,
- char * pInternalName );
-
-extern void CALLTYPE IsAsync( USHORT * nNo, ParamType * peType );
-
-extern void CALLTYPE Advice( USHORT * nNo, AdvData * pfCallback );
-
-extern void CALLTYPE Unadvice( double * nHandle );
-
-/* new in StarOffice 5.0 */
-
-extern void CALLTYPE GetParameterDescription( USHORT* nNo, USHORT* nParam,
- char* pName, char* pDesc );
-
-
-/* new in StarOffice 5.1 */
-
-extern void CALLTYPE SetLanguage( USHORT* nLanguage );
-
-
-#endif
-
-#endif
-
-/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/sc/addin/inc/dfa.hrc b/sc/addin/inc/dfa.hrc
deleted file mode 100644
index 6d39c7f..0000000
--- a/sc/addin/inc/dfa.hrc
+++ /dev/null
@@ -1,61 +0,0 @@
-/*************************************************************************
- *
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * Copyright 2000, 2010 Oracle and/or its affiliates.
- *
- * OpenOffice.org - a multi-platform office productivity suite
- *
- * This file is part of OpenOffice.org.
- *
- * OpenOffice.org is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License version 3
- * only, as published by the Free Software Foundation.
- *
- * OpenOffice.org is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License version 3 for more details
- * (a copy is included in the LICENSE file that accompanied this code).
- *
- * You should have received a copy of the GNU Lesser General Public License
- * version 3 along with OpenOffice.org. If not, see
- * <http://www.openoffice.org/license.html>
- * for a copy of the LGPLv3 License.
- *
- ************************************************************************/
-#ifndef SC_ADDIN_DFA_HRC
-#define SC_ADDIN_DFA_HRC
-
-#define DFA_PAR_DATE1_NAME 1 /* Name of Date1 Parameter */
-#define DFA_PAR_DATE2_NAME 2 /* Name of Date2 Parameter */
-#define DFA_PAR_MODE_NAME 3 /* Name of Mode Parameter */
-#define DFA_PAR_DATE_NAME 4 /* Name of Date Parameter */
-#define DFA_PAR_DATE_DESC 5 /* Description of Date Parameter 1 */
-
-#define DFA_WEEK_NAME 6 /* Name */
-#define DFA_WEEK_DESC 7 /* Description */
-#define DFA_WEEK_PAR1_DESC 8 /* Description of Parameter 1 */
-#define DFA_WEEK_PAR2_DESC 9 /* Description of Parameter 2 */
-#define DFA_WEEK_PAR3_DESC 10 /* Description of Parameter 3 */
-#define DFA_MONTHS_NAME 11 /* Name */
-#define DFA_MONTHS_DESC 12 /* Description */
-#define DFA_MONTHS_PAR1_DESC 13 /* Description of Parameter 1 */
-#define DFA_MONTHS_PAR2_DESC 14 /* Description of Parameter 2 */
-#define DFA_MONTHS_PAR3_DESC 15 /* Description of Parameter 2 */
-#define DFA_YEARS_NAME 16 /* Name */
-#define DFA_YEARS_DESC 17 /* Description */
-#define DFA_YEARS_PAR1_DESC 18 /* Description of Parameter 1 */
-#define DFA_YEARS_PAR2_DESC 19 /* Description of Parameter 2 */
-#define DFA_YEARS_PAR3_DESC 20 /* Description of Parameter 2 */
-#define DFA_ISLEAPYEAR_NAME 21 /* Name */
-#define DFA_ISLEAPYEAR_DESC 22 /* Description */
-#define DFA_DAYSINMONTH_NAME 23 /* Name */
-#define DFA_DAYSINMONTH_DESC 24 /* Description */
-#define DFA_DAYSINYEAR_NAME 25 /* Name */
-#define DFA_DAYSINYEAR_DESC 26 /* Description */
-#define DFA_WEEKSINYEAR_NAME 27 /* Name */
-#define DFA_WEEKSINYEAR_DESC 28 /* Description */
-
-#endif
-
diff --git a/sc/addin/inc/rot13.hrc b/sc/addin/inc/rot13.hrc
deleted file mode 100644
index dba4340..0000000
--- a/sc/addin/inc/rot13.hrc
+++ /dev/null
@@ -1,34 +0,0 @@
-/*************************************************************************
- *
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * Copyright 2000, 2010 Oracle and/or its affiliates.
- *
- * OpenOffice.org - a multi-platform office productivity suite
- *
- * This file is part of OpenOffice.org.
- *
- * OpenOffice.org is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License version 3
- * only, as published by the Free Software Foundation.
- *
- * OpenOffice.org is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License version 3 for more details
- * (a copy is included in the LICENSE file that accompanied this code).
- *
- * You should have received a copy of the GNU Lesser General Public License
- * version 3 along with OpenOffice.org. If not, see
- * <http://www.openoffice.org/license.html>
- * for a copy of the LGPLv3 License.
- *
- ************************************************************************/
-#ifndef SC_ADDIN_ROT13_HRC
-#define SC_ADDIN_ROT13_HRC
-
-#define ROT13_DESC 1
-#define ROT13_PAR1_NAME 2
-#define ROT13_PAR1_DESC 3
-
-#endif
diff --git a/sc/addin/makefile.mk b/sc/addin/makefile.mk
deleted file mode 100644
index e716a8d..0000000
--- a/sc/addin/makefile.mk
+++ /dev/null
@@ -1,45 +0,0 @@
-#*************************************************************************
-#
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# Copyright 2000, 2010 Oracle and/or its affiliates.
-#
-# OpenOffice.org - a multi-platform office productivity suite
-#
-# This file is part of OpenOffice.org.
-#
-# OpenOffice.org is free software: you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License version 3
-# only, as published by the Free Software Foundation.
-#
-# OpenOffice.org is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU Lesser General Public License version 3 for more details
-# (a copy is included in the LICENSE file that accompanied this code).
-#
-# You should have received a copy of the GNU Lesser General Public License
-# version 3 along with OpenOffice.org. If not, see
-# <http://www.openoffice.org/license.html>
-# for a copy of the LGPLv3 License.
-#
-#*************************************************************************
-
-PRJ=..
-
-PRJNAME=sc
-TARGET=addin
-
-# --- Settings -----------------------------------------------------
-
-.INCLUDE: settings.mk
-
-# --- Targets -------------------------------------------------------
-
-.INCLUDE: target.mk
-
-ALLTAR: $(MISC)$/cl2c.pl
-
-$(MISC)$/cl2c.pl: util/cl2c.pl
- tr -d "\015" < util$/cl2c.pl > $@
- chmod +rw $@
diff --git a/sc/addin/rot13/exports.map b/sc/addin/rot13/exports.map
deleted file mode 100644
index c662c91..0000000
--- a/sc/addin/rot13/exports.map
+++ /dev/null
@@ -1,11 +0,0 @@
-UDK_3_0_0 {
- global:
- GetFunctionCount;
- GetFunctionData;
- GetParameterDescription;
- SetLanguage;
- Rot13;
-
- local:
- *;
-};
diff --git a/sc/addin/rot13/makefile.mk b/sc/addin/rot13/makefile.mk
deleted file mode 100644
index a33c50d..0000000
--- a/sc/addin/rot13/makefile.mk
+++ /dev/null
@@ -1,88 +0,0 @@
-#*************************************************************************
-#
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# Copyright 2000, 2010 Oracle and/or its affiliates.
-#
-# OpenOffice.org - a multi-platform office productivity suite
-#
-# This file is part of OpenOffice.org.
-#
-# OpenOffice.org is free software: you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License version 3
-# only, as published by the Free Software Foundation.
-#
-# OpenOffice.org is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU Lesser General Public License version 3 for more details
-# (a copy is included in the LICENSE file that accompanied this code).
-#
-# You should have received a copy of the GNU Lesser General Public License
-# version 3 along with OpenOffice.org. If not, see
-# <http://www.openoffice.org/license.html>
-# for a copy of the LGPLv3 License.
-#
-#*************************************************************************
-
-PRJ=..$/..
-
-PRJNAME=sc
-TARGET=rot
-LIBTARGET=NO
-
-
-# --- Settings -----------------------------------------------------
-
-.INCLUDE: settings.mk
-
-CL2C=+$(PERL) $(MISC)$/cl2c.pl
-CL2CRID=RID_SC_ADDIN_ROT13
-CL2CSRC=$(TARGET)13.src
-
-# --- Files --------------------------------------------------------
-
-CFILES= $(MISC)$/x$(TARGET).c
-
-SLOFILES= \
- $(SLO)$/x$(TARGET).obj
-
-# ==========================================================================
-
-SHL1TARGET= rot$(DLLPOSTFIX)
-SHL1IMPLIB= irot
-SHL1OBJS= $(SLO)$/x$(TARGET).obj
-
-SHL1VERSIONMAP=exports.map
-SHL1DEF=$(MISC)$/$(SHL1TARGET).def
-DEF1NAME=$(SHL1TARGET)
-
-.IF "$(GUI)" == "WNT"
-SHL1STDLIBS= $(GDI32LIB) $(ADVAPI32LIB) $(COMDLG32LIB) \
- $(UUIDLIB) $(OLE32LIB) $(SHELL32LIB) $(WINSPOOLLIB)
-.IF "$(GVER)" == "W40"
-SHL1STDLIBS= $(SHL1STDLIBS) $(COMCTL32LIB)
-.ENDIF # W40
-.ENDIF # WNT
-
-# --- Targets -------------------------------------------------------
-
-ALLTAR: $(MISC)$/rot.lst
-
-.INCLUDE: target.mk
-
-$(MISC)$/x$(TARGET).c: $(TARGET)13.cl $(CL2CSRC) $(MISC)$/cl2c.pl
- $(CL2C) $(TARGET)13.cl $(MISC)$/x$(TARGET).c $(CL2CSRC) $(CL2CRID)
-
-# copy file to include in package
-$(INCCOM)$/xlang.h : $(SOLARINCDIR)$/i18npool$/lang.h
- @$(COPY) $(SOLARINCDIR)$/i18npool$/lang.h $@
-
-$(SLOFILES) : $(INCCOM)$/xlang.h $(CFILES)
-
-$(MISC)$/rot.lst : \
- $(MISC)$/x$(TARGET).c \
- $(INCCOM)$/xlang.h \
- ..$/inc$/rot13.hrc \
- ..$/inc$/addin.h
- @echo $< > $@
diff --git a/sc/addin/rot13/rot13.cl b/sc/addin/rot13/rot13.cl
deleted file mode 100644
index 5c7e92a..0000000
--- a/sc/addin/rot13/rot13.cl
+++ /dev/null
@@ -1,158 +0,0 @@
-/*************************************************************************
- *
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * Copyright 2000, 2010 Oracle and/or its affiliates.
- *
- * OpenOffice.org - a multi-platform office productivity suite
- *
- * This file is part of OpenOffice.org.
- *
- * OpenOffice.org is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License version 3
- * only, as published by the Free Software Foundation.
- *
- * OpenOffice.org is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License version 3 for more details
- * (a copy is included in the LICENSE file that accompanied this code).
- *
- * You should have received a copy of the GNU Lesser General Public License
- * version 3 along with OpenOffice.org. If not, see
- * <http://www.openoffice.org/license.html>
- * for a copy of the LGPLv3 License.
- *
- ************************************************************************/
-
-/* static char rot13_Id[]="@(#) StarCalc Rot13 AddIn (c) 1998-2000 Sun Microsystems, Inc."; */
-
-#include <string.h>
-#include <stdio.h>
-
-#include <xlang.h>
-#include <addin.h>
-#include <rot13.hrc>
-
-/**
- * the current language the Addin is using
- */
-static USHORT _nLanguage=LANGUAGE_ENGLISH;
-
-/**
- * StarCalc calls this function to set a new current Language for the Addin
- *
- * @param *nLanguage
- *
- */
-void CALLTYPE SetLanguage( USHORT* nLanguage )
-{
- _nLanguage = GetNeutralLanguage( *nLanguage );
-}
-
-
-/**
- * Tell StarCalc how many new functions this Addin provides.
- *
- * @param *nCount - returns the number of functions which are exported to StarCalc
- *
- */
-void CALLTYPE GetFunctionCount( USHORT *nCount )
-{
- *nCount = 1;
-}
-
-/**
- * Provides neccessary data for each new function to StarCalc
- *
- * @param *nNo Input: Function number between 0 and nCount - 1
- * @param *pFuncName Output: Functionname which should be called in the AddIn-DLL
- * @param *nParamCount Output: Number of Parameter. Must be greater than 0, because there's always
a return-Value. Maximum is 16.
- * @param *peType Output: Pointer to arrray with exactly 16 variables of typ Paramtype.
nParamCount Entries are set to the type of the corresponding Parameters.
- * @param *pInternalName Output: Functionname as seen by the Spreadsheet user
- *
- * @see #GetFunctionCount, #GetParameterDescription
- *
- */
-void CALLTYPE GetFunctionData( USHORT * nNo,
- char * pFuncName,
- USHORT * nParamCount,
- ParamType * peType,
- char * pInternalName )
-{
-
- switch( *nNo ) {
- case 0:
- /* the function name is the same in all languages */
- SO_StringCopy( pInternalName, "Rot13" );
- SO_StringCopy( pFuncName, "Rot13" );
- peType[0] = PTR_STRING;
- peType[1] = PTR_STRING;
- *nParamCount=2;
- break;
- default:
- *nParamCount = 0;
- *pFuncName = 0;
- *pInternalName = 0;
- break;
- }
-}
-
-/**
- * Provides descriptions for each new function to StarCalc
- * which are shown is the autopilot
- *
- * @param *nNo Input Parameter, Function number between 0 and nCount - 1
- * @param *nParam Parameter Number
- * @param *pName Output: Name of the parameter
- * @param *pDesc Output: Description of the parameter
- *
- * @see #GetFunctionCount, #GetParameterDescription
- */
-void CALLTYPE GetParameterDescription( USHORT* nNo, USHORT* nParam,
-char* pName, char* pDesc )
-{
- *pName = 0;
- *pDesc = 0;
-
-
- switch ( *nNo ) {
- case 0:
- switch ( *nParam ) {
- case 0:
- SO_StringCopy(pDesc,getText(ROT13_DESC));
- break;
- case 1:
- SO_StringCopy(pName,getText(ROT13_PAR1_NAME));
- SO_StringCopy(pDesc,getText(ROT13_PAR1_DESC));
- }
- }
-}
-
-/**
- * ROT13 Algorithm, each alphabetical character of the text is rotated by 13 in the alphabet
- *
- * @param *ret
- * @param *src
- *
- * ER: well, my personal favorite algorithm is
- * main(_){while(_=~getchar())putchar(~_-1/(~(_|32)/13*2-11)*13);}
- * but for clarification we do it somehow different here ;-)
- */
-void CALLTYPE Rot13(char *ret, char *src)
-{
- if ( ! ret ) return;
- if ( ! src ) *ret='\0';
-
- for(;src && *src; src++ , ret++) {
- *ret=*src;
- if (*ret >= 'A' && *ret <= 'Z') {
- if ( (*ret +=13) > 'Z' ) *ret-=26;
- } else if (*ret >= 'a' && *ret < 'n') {
- *ret +=13;
- } else if (*ret >= 'n' && *ret <= 'z') {
- *ret -=13;
- }
- }
- *ret=*src;
-}
diff --git a/sc/addin/rot13/rot13.src b/sc/addin/rot13/rot13.src
deleted file mode 100644
index 5518ae0..0000000
--- a/sc/addin/rot13/rot13.src
+++ /dev/null
@@ -1,58 +0,0 @@
-/*************************************************************************
- *
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * Copyright 2000, 2010 Oracle and/or its affiliates.
- *
- * OpenOffice.org - a multi-platform office productivity suite
- *
- * This file is part of OpenOffice.org.
- *
- * OpenOffice.org is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License version 3
- * only, as published by the Free Software Foundation.
- *
- * OpenOffice.org is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License version 3 for more details
- * (a copy is included in the LICENSE file that accompanied this code).
- *
- * You should have received a copy of the GNU Lesser General Public License
- * version 3 along with OpenOffice.org. If not, see
- * <http://www.openoffice.org/license.html>
- * for a copy of the LGPLv3 License.
- *
- ************************************************************************/
-#include "sc.hrc" // Definition RID_XXX in StarCalc
-#include "rot13.hrc"
-
-/* #i54546# The code belonging to this resource file is sample code for the
- * legacy AddIn interface. The interface is still supported, but deprecated.
- * The strings here were displayed in the function wizard. To prevent
- * duplicated and useless translation effort (functions and strings are also
- * part of the new scaddin module), the strings here are now layed out as fixed
- * untranslatable strings. The entire mechanism with the ../util/cl2c.pl perl
- * script merging the raw .cl and the .src during build time didn't work
- * anymore anyway, since we switched from MS-LCIDs / telephone area codes to
- * ISO codes for resources, and introduced localize.sdf files. Returned was
- * always an empty string. Now at least the fixed English string is returned.
- * */
-
-Resource RID_SC_ADDIN_ROT13
-{
- String ROT13_DESC // Description
- {
- Text = "ROT13 Algorithm, each alphabetical character of the text is rotated by 13 in the
alphabet";
- };
-
- String ROT13_PAR1_NAME // Name of Parameter 1
- {
- Text = "Text";
- };
-
- String ROT13_PAR1_DESC // Description of Parameter 1
- {
- Text = "The text that is to be rotated";
- };
-};
diff --git a/sc/addin/util/cl2c.pl b/sc/addin/util/cl2c.pl
deleted file mode 100644
index fb88528..0000000
--- a/sc/addin/util/cl2c.pl
+++ /dev/null
@@ -1,238 +0,0 @@
-#!/usr/solar/bin/perl
-
-##########################################################################
-#
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# Copyright 2000, 2010 Oracle and/or its affiliates.
-#
-# OpenOffice.org - a multi-platform office productivity suite
-#
-# This file is part of OpenOffice.org.
-#
-# OpenOffice.org is free software: you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License version 3
-# only, as published by the Free Software Foundation.
-#
-# OpenOffice.org is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU Lesser General Public License version 3 for more details
-# (a copy is included in the LICENSE file that accompanied this code).
-#
-# You should have received a copy of the GNU Lesser General Public License
-# version 3 along with OpenOffice.org. If not, see
-# <http://www.openoffice.org/license.html>
-# for a copy of the LGPLv3 License.
-#
-##########################################################################
-
-if ( $#ARGV != 3 ) {
- print STDERR "usage: cl2c.pl <file.cl> <file.c> <file.src> <resname>\n";
- exit -1;
-}
-
-$CL=$ARGV[0];
-$C=$ARGV[1];
-$SRC=$ARGV[2];
-$RNAME=$ARGV[3];
-
-sub sconv
-{
- local($s)=@_[0];
- local($o,$c);
- $_="";
- foreach $o ( unpack("C*",$s) ) {
- $c=chr($o);
- if ( $o >= 32 && $o < 127 ) {
- $_ .= $c;
- } else {
- $_ .= sprintf("\\%o", $o);
- }
- }
- return $_;
-}
-
-
-sub makeneutral {
-
- print COUT "\n\n/**\n";
- print COUT " * Get neutral language for specific language.\n";
- print COUT " * This simplifies the getText switch cases and allows to handle\n";
- print COUT " * previously unknown language derivates due to foreign installations.\n";
- print COUT " * If you want to distinguish between some dialects change this function\n";
- print COUT " * to return the desired nLang before doing the bit masking stuff.\n";
- print COUT " * See xlang.h for defined LANGUAGE_*\n";
- print COUT " */\n";
-
- # taken from tools/source/intntl/intn.cxx International::GetNeutralLanguage
- print COUT "static USHORT GetNeutralLanguage( USHORT nLang )\n";
- print COUT "{\n";
- print COUT "\tUSHORT nPrimLang;\n";
- print COUT "\n";
- print COUT "\t/* ignore LANGUAGE_USER* */\n";
- print COUT "\tif ( (nLang & 0x03FF) >= 0x0200 )\n";
- print COUT "\t return nLang;\n";
- print COUT "\n";
- print COUT "\tnLang &= 0x03FF;\n";
- print COUT "\n";
- print COUT "\tnPrimLang = nLang | 0x0400;\n";
- print COUT "\n";
- print COUT "\tswitch ( nPrimLang )\n";
- print COUT "\t{\n";
- print COUT "\t\tcase LANGUAGE_CHINESE_TRADITIONAL:\n";
- print COUT "\t\t\tnLang = LANGUAGE_CHINESE;\n";
- print COUT "\t\t\tbreak;\n";
- print COUT "\t\tcase LANGUAGE_ENGLISH_US:\n";
- print COUT "\t\t\tnLang = LANGUAGE_ENGLISH;\n";
- print COUT "\t\t\tbreak;\n";
- print COUT "\t\tcase LANGUAGE_NORWEGIAN_BOKMAL:\n";
- print COUT "\t\t\tnLang = LANGUAGE_NORWEGIAN;\n";
- print COUT "\t\t\tbreak;\n";
- print COUT "\t\tcase LANGUAGE_PORTUGUESE_BRAZILIAN:\n";
- print COUT "\t\t\tnLang = LANGUAGE_PORTUGUESE;\n";
- print COUT "\t\t\tbreak;\n";
- print COUT "\n";
- print COUT "\t\tdefault:\n";
- print COUT "\t\t\tnLang = nPrimLang;\n";
- print COUT "\t\t\tbreak;\n";
- print COUT "\t}\n";
- print COUT "\n";
- print COUT "\treturn nLang;\n";
- print COUT "}\n";
- print COUT "\n";
-
-}
-
-
-sub maketext {
-
- print COUT "\n\n/**\n";
- print COUT " * Get text resource for current language.\n";
- print COUT " * Remember that 8-bit characters are shown in\n";
- print COUT " * system dependend code pages!\n";
- print COUT " * To get correct results you will have to distuinguish\n";
- print COUT " * for example between UNIX and WIN and OS2 target systems.\n";
- print COUT " */\n";
-
- print COUT "static char* getText( int nResource )\n{\n";
- print COUT "\tswitch( nResource ) {\n";
-
- $resflag=0;
- $strname="";
- $cnt=0;
- $text_english="";
-
- while (<SRCIN>) {
- $resflag=1 if ( /Resource\s$RNAME/ );
-
- if ( /\{/ ) {
- if ( ++$cnt == 2 ) {
- # start language
- $text_english="";
- print COUT "\t\t\tswitch( _nLanguage ) {\n";
- next;
- }
- }
-
- if ( /\}/ ) {
- if ( --$cnt == 1 ) {
- # end language
-
- if ( $text_english ne "" ) {
- print COUT "\t\t\t\tcase LANGUAGE_ENGLISH:\n\t\t\t\tdefault:\n";
- print COUT "\t\t\t\treturn(" . $text_english . ")\;\n";
- }
-
- print COUT "\t\t\t}\n\t\t\tbreak;\n";
- next;
- } elsif ( $cnt == 0 ) {
- # end of resource
- $resflag=0;
- print COUT "\t\tdefault:\n\t\t\tbreak;\n";
- print COUT "\t}\n\treturn(\"\");\n}\n";
- next;
- }
-
- }
-
- if ( $resflag && $cnt == 1) {
- if ( /\sString\s(([A-Z]|\_|[0-9]|[a-z])*)/ ) {
- $strname=$1;
- print COUT "\t\tcase " . $strname . ":\n";
- }
- }
-
- if ( $cnt == 2 && /^\s*Text/ ) {
- $langname="german";
- ($textdef,@textx)=split(/=/);
- $text=join("=",@textx);
- if ( $textdef =~ /\[\s+(.*)\s+\]/ ) {
- $langname=$1;
- }
- else {
- $langname="ENGLISH_US"; # no [...] => not to be translated
- }
-
- $langname="LANGUAGE_" . uc($langname);
-
- chop($text) while ( $text=~/(\r|\n|\;)$/ );
- $text=sconv($text);
- # english_us, not english because it's developer's pigeon
- if ( $langname eq "LANGUAGE_ENGLISH_US" ) {
- $text_english=$text;
- }
- # ISO coded, obtain at least the default
- elsif ( $langname =~ /^LANGUAGE_EN-US$/ ) {
- $text_english=$text;
- }
- # we don't know about USER languages, ENGLISH will be appended later
- elsif ( ! ( $langname =~ /LANGUAGE_USER/ || $langname =~ /^LANGUAGE_ENGLISH$/ ) ) {
- # ER 28.04.99: for the moment only German and English are
- # exported, because we have a problem with non-existing
- # character code tables for systems other than Windoze.
- # => Chinese would be definitely mixed up and we don't
- # want to insult anybody.. others like Spanish would look
- # very ugly, but we'll have to live with bad German Umlauts.
- if ( $langname =~ /LANGUAGE_(GERMAN|ENGLISH)/ ) {
- print COUT "\t\t\t\tcase " . $langname . ":\n";
- print COUT "\t\t\t\treturn(" . $text . ")\;\n";
- }
- }
-
- }
- }
-
- makeneutral();
-
-}
-
-open(CLIN,"<$CL") || die "can not open $CL\n";
-open(SRCIN,"<$SRC") || die "can not open $CL\n";
-open(COUT,">$C") || die "can not open $CL\n";
-
-$ccnt=0;
-$incomment=0;
-while(<CLIN>) {
- if ( /^\/\*--(-*)/ ) {
- $incomment=1;
- $ccnt++;
- }
-
- print COUT $_ if ( $incomment==0 || $ccnt==1 );
-
- &maketext() if ( /^static USHORT _nLanguage=/ );
-
- if ( /(-*)--\*\/$/ ) {
- $incomment=0;
- }
-
-}
-
-close(CLIN);
-close(SRCIN);
-close(COUT);
-
-exit 0;
-
-
diff --git a/sc/addin/util/makefile.mk b/sc/addin/util/makefile.mk
deleted file mode 100644
index 2bd7514..0000000
--- a/sc/addin/util/makefile.mk
+++ /dev/null
@@ -1,47 +0,0 @@
-#*************************************************************************
-#
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# Copyright 2000, 2010 Oracle and/or its affiliates.
-#
-# OpenOffice.org - a multi-platform office productivity suite
-#
-# This file is part of OpenOffice.org.
-#
-# OpenOffice.org is free software: you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License version 3
-# only, as published by the Free Software Foundation.
-#
-# OpenOffice.org is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU Lesser General Public License version 3 for more details
-# (a copy is included in the LICENSE file that accompanied this code).
-#
-# You should have received a copy of the GNU Lesser General Public License
-# version 3 along with OpenOffice.org. If not, see
-# <http://www.openoffice.org/license.html>
-# for a copy of the LGPLv3 License.
-#
-#*************************************************************************
-PRJ=..$/..
-
-PRJNAME=sc
-TARGET=autil
-
-
-# --- Settings -----------------------------------------------------
-
-.INCLUDE: settings.mk
-
-$(BIN)$/addin.zip : \
- $(MISC)$/rot.lst \
- $(MISC)$/dfa.lst
- $(TYPE) $(MISC)$/rot.lst | tr -s " " "\n" | zip -@ -u -j -ll $(BIN)$/addin.zip
$(CHECKZIPRESULT)
- $(TYPE) $(MISC)$/dfa.lst | tr -s " " "\n" | zip -@ -u -j -ll $(BIN)$/addin.zip
$(CHECKZIPRESULT)
- chmod +rw $(BIN)$/addin.zip
-
-.INCLUDE: target.mk
-
-ALLTAR: $(BIN)$/addin.zip
-
diff --git a/sc/prj/build.lst b/sc/prj/build.lst
index a78f523..1a641a6 100755
--- a/sc/prj/build.lst
+++ b/sc/prj/build.lst
@@ -9,7 +9,6 @@ sc sc\res\imglst\apptbx get - all
sc_resap NULL
sc sc\source\core\inc get - all sc_coinc
NULL
sc sc\source\ui\inc get - all sc_uiinc
NULL
sc sc\source\filter\inc get - all sc_fiinc
NULL
-sc sc\addin\inc get - all sc_adinc
NULL
sc sc\sdi nmake - all sc_sdi
sc_inc NULL
sc sc\source\core\data nmake - all sc_data
sc_sdi sc_inc NULL
sc sc\source\core\src nmake - all sc_cosrc
sc_sdi sc_inc NULL
@@ -43,9 +42,5 @@ sc sc\source\filter\rtf nmake - all
sc_rtf sc_sdi sc_inc NULL
sc sc\source\filter\html nmake - all sc_html
sc_sdi sc_inc NULL
sc sc\source\filter\xml nmake - all sc_xml
sc_sdi sc_inc NULL
sc sc\source\filter\xcl97 nmake - all sc_xcl97
sc_sdi sc_inc NULL
-sc sc\addin nmake - all sc_add
sc_sdi sc_inc NULL
-sc sc\addin\datefunc nmake - all sc_addfu
sc_add sc_sdi sc_inc NULL
-sc sc\addin\rot13 nmake - all sc_adrot
sc_add sc_sdi sc_inc NULL
-sc sc\addin\util nmake - all sc_adutil
sc_addfu sc_adrot sc_sdi sc_inc NULL
-sc sc\util nmake - all sc_util
sc_addfu sc_adrot sc_adutil sc_app sc_attr sc_cctrl sc_cosrc sc_data sc_dbgui sc_dif sc_docsh
sc_drfnc sc_excel sc_form sc_html sc_lotus sc_qpro sc_misc sc_name sc_nvipi sc_opt sc_page sc_rtf
sc_scalc sc_style sc_tool sc_uisrc sc_undo sc_unobj sc_view sc_xcl97 sc_xml sc_acc sc_ftools sc_inc
sc_vba NULL
+sc sc\util nmake - all sc_util
sc_app sc_attr sc_cctrl sc_cosrc sc_data sc_dbgui sc_dif sc_docsh sc_drfnc sc_excel sc_form sc_html
sc_lotus sc_qpro sc_misc sc_name sc_nvipi sc_opt sc_page sc_rtf sc_scalc sc_style sc_tool sc_uisrc
sc_undo sc_unobj sc_view sc_xcl97 sc_xml sc_acc sc_ftools sc_inc sc_vba NULL
sc sc\qa\unit nmake - all
sc_qa_cppunit sc_util NULL
--
1.7.1
Context
- [Libreoffice] [PATCH] Remove legacy Addin functions from calc · Alfonso Eusebio
Privacy Policy |
Impressum (Legal Info) |
Copyright information: Unless otherwise specified, all text and images
on this website are licensed under the
Creative Commons Attribution-Share Alike 3.0 License.
This does not include the source code of LibreOffice, which is
licensed under the Mozilla Public License (
MPLv2).
"LibreOffice" and "The Document Foundation" are
registered trademarks of their corresponding registered owners or are
in actual use as trademarks in one or more countries. Their respective
logos and icons are also subject to international copyright laws. Use
thereof is explained in our
trademark policy.